211 lines
8.3 KiB
Perl
211 lines
8.3 KiB
Perl
use Test::More tests => 38;
|
|
use strict;
|
|
use warnings;
|
|
|
|
BEGIN {
|
|
use FindBin;
|
|
use lib "$FindBin::Bin/../lib";
|
|
use local::lib "$FindBin::Bin/../local-lib";
|
|
}
|
|
|
|
use List::Util qw(first);
|
|
use Slic3r;
|
|
use Slic3r::Test;
|
|
|
|
{
|
|
my $config = Slic3r::Config::new_from_defaults;
|
|
|
|
my $test = sub {
|
|
my ($conf) = @_;
|
|
$conf ||= $config;
|
|
|
|
my $print = Slic3r::Test::init_print('2x20x10', config => $conf);
|
|
|
|
my $last_move_was_z_change = 0;
|
|
Slic3r::GCode::Reader->new->parse(Slic3r::Test::gcode($print), sub {
|
|
my ($self, $cmd, $args, $info) = @_;
|
|
|
|
if ($last_move_was_z_change && $cmd ne $config->layer_gcode) {
|
|
fail 'custom layer G-code was not applied after Z change';
|
|
}
|
|
if (!$last_move_was_z_change && $cmd eq $config->layer_gcode) {
|
|
fail 'custom layer G-code was not applied after Z change';
|
|
}
|
|
|
|
$last_move_was_z_change = (defined $info->{dist_Z} && $info->{dist_Z} > 0);
|
|
});
|
|
|
|
1;
|
|
};
|
|
|
|
$config->set('start_gcode', '_MY_CUSTOM_START_GCODE_'); # to avoid dealing with the nozzle lift in start G-code
|
|
$config->set('layer_gcode', '_MY_CUSTOM_LAYER_GCODE_');
|
|
ok $test->(), "custom layer G-code is applied after Z move and before other moves";
|
|
}
|
|
|
|
#==========================================================
|
|
|
|
{
|
|
my $config = Slic3r::Config::new_from_defaults;
|
|
$config->set('output_filename_format', 'ts_[travel_speed]_lh_[layer_height].gcode');
|
|
$config->set('start_gcode', "TRAVEL:[travel_speed] HEIGHT:[layer_height]\n");
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
|
|
my $output_file = $print->print->output_filepath;
|
|
my ($t, $h) = map $config->$_, qw(travel_speed layer_height);
|
|
ok $output_file =~ /ts_${t}_/, 'print config options are replaced in output filename';
|
|
ok $output_file =~ /lh_$h\./, 'region config options are replaced in output filename';
|
|
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
ok $gcode =~ /TRAVEL:$t/, 'print config options are replaced in custom G-code';
|
|
ok $gcode =~ /HEIGHT:$h/, 'region config options are replaced in custom G-code';
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config->new;
|
|
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
|
|
$config->set('extruder', 2);
|
|
$config->set('first_layer_temperature', [200,205]);
|
|
|
|
{
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
ok $gcode =~ /M104 S205 T1/, 'temperature set correctly for non-zero yet single extruder';
|
|
ok $gcode !~ /M104 S\d+ T0/, 'unused extruder correctly ignored';
|
|
}
|
|
|
|
$config->set('infill_extruder', 1);
|
|
{
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
ok $gcode =~ /M104 S200 T0/, 'temperature set correctly for first extruder';
|
|
ok $gcode =~ /M104 S205 T1/, 'temperature set correctly for second extruder';
|
|
}
|
|
|
|
my @start_gcode = (qq!
|
|
;__temp0:[first_layer_temperature_0]__
|
|
;__temp1:[first_layer_temperature_1]__
|
|
;__temp2:[first_layer_temperature_2]__
|
|
!, qq!
|
|
;__temp0:{first_layer_temperature[0]}__
|
|
;__temp1:{first_layer_temperature[1]}__
|
|
;__temp2:{first_layer_temperature[2]}__
|
|
!);
|
|
my @syntax_description = (' (legacy syntax)', ' (new syntax)');
|
|
for my $i (0, 1) {
|
|
$config->set('start_gcode', $start_gcode[$i]);
|
|
{
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
# we use the [infill_extruder] placeholder to make sure this test doesn't
|
|
# catch a false positive caused by the unparsed start G-code option itself
|
|
# being embedded in the G-code
|
|
ok $gcode =~ /temp0:200/, 'temperature placeholder for first extruder correctly populated' . $syntax_description[$i];
|
|
ok $gcode =~ /temp1:205/, 'temperature placeholder for second extruder correctly populated' . $syntax_description[$i];
|
|
ok $gcode =~ /temp2:200/, 'temperature placeholder for unused extruder populated with first value' . $syntax_description[$i];
|
|
}
|
|
}
|
|
|
|
$config->set('start_gcode', qq!
|
|
;substitution:{if infill_extruder==1}extruder1
|
|
{elsif infill_extruder==2}extruder2
|
|
{else}extruder3{endif}
|
|
!);
|
|
{
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
ok $gcode =~ /substitution:extruder1/, 'if / else / endif - first block returned';
|
|
}
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config::new_from_defaults;
|
|
$config->set('before_layer_gcode', ';BEFORE [layer_num]');
|
|
$config->set('layer_gcode', ';CHANGE [layer_num]');
|
|
$config->set('support_material', 1);
|
|
$config->set('layer_height', 0.2);
|
|
my $print = Slic3r::Test::init_print('overhang', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
|
|
my @before = ();
|
|
my @change = ();
|
|
foreach my $line (split /\R+/, $gcode) {
|
|
if ($line =~ /;BEFORE (\d+)/) {
|
|
push @before, $1;
|
|
} elsif ($line =~ /;CHANGE (\d+)/) {
|
|
push @change, $1;
|
|
fail 'inconsistent layer_num before and after layer change'
|
|
if $1 != $before[-1];
|
|
}
|
|
}
|
|
is_deeply \@before, \@change, 'layer_num is consistent before and after layer changes';
|
|
ok !defined(first { $change[$_] != $change[$_-1]+1 } 1..$#change),
|
|
'layer_num grows continously'; # i.e. no duplicates or regressions
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config->new;
|
|
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6,0.6]);
|
|
$config->set('start_gcode', qq!
|
|
;substitution:{if infill_extruder==1}if block
|
|
{elsif infill_extruder==2}elsif block 1
|
|
{elsif infill_extruder==3}elsif block 2
|
|
{elsif infill_extruder==4}elsif block 3
|
|
{else}endif block{endif}
|
|
!);
|
|
my @returned = ('', 'if block', 'elsif block 1', 'elsif block 2', 'elsif block 3', 'endif block');
|
|
for my $i (1,2,3,4,5) {
|
|
$config->set('infill_extruder', $i);
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
my $found_other = 0;
|
|
for my $j (1,2,3,4,5) {
|
|
next if $i == $j;
|
|
$found_other = 1 if $gcode =~ /substitution:$returned[$j]/;
|
|
}
|
|
ok $gcode =~ /substitution:$returned[$i]/, 'if / else / endif - ' . $returned[$i] . ' returned';
|
|
ok !$found_other, 'if / else / endif - only ' . $returned[$i] . ' returned';
|
|
}
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config->new;
|
|
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
|
|
$config->set('start_gcode',
|
|
';substitution:{if infill_extruder==1}{if perimeter_extruder==1}block11{else}block12{endif}' .
|
|
'{elsif infill_extruder==2}{if perimeter_extruder==1}block21{else}block22{endif}' .
|
|
'{else}{if perimeter_extruder==1}block31{else}block32{endif}{endif}:end');
|
|
for my $i (1,2,3) {
|
|
$config->set('infill_extruder', $i);
|
|
for my $j (1,2) {
|
|
$config->set('perimeter_extruder', $j);
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
ok $gcode =~ /substitution:block$i$j:end/, "two level if / else / endif - block$i$j returned";
|
|
}
|
|
}
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config->new;
|
|
$config->set('start_gcode',
|
|
';substitution:{if notes=="MK2"}MK2{elsif notes=="MK3"}MK3{else}MK1{endif}:end');
|
|
for my $printer_name ("MK2", "MK3", "MK1") {
|
|
$config->set('notes', $printer_name);
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
ok $gcode =~ /substitution:$printer_name:end/, "printer name $printer_name matched";
|
|
}
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config::new_from_defaults;
|
|
$config->set('complete_objects', 1);
|
|
$config->set('between_objects_gcode', '_MY_CUSTOM_GCODE_');
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config, duplicate => 3);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
is scalar(() = $gcode =~ /^_MY_CUSTOM_GCODE_/gm), 2, 'between_objects_gcode is applied correctly';
|
|
}
|
|
|
|
__END__
|