1342 lines
55 KiB
C++
1342 lines
55 KiB
C++
// Configuration store of Slic3r.
|
|
//
|
|
// The configuration store is either static or dynamic.
|
|
// DynamicPrintConfig is used mainly at the user interface. while the StaticPrintConfig is used
|
|
// during the slicing and the g-code generation.
|
|
//
|
|
// The classes derived from StaticPrintConfig form a following hierarchy.
|
|
//
|
|
// FullPrintConfig
|
|
// PrintObjectConfig
|
|
// PrintRegionConfig
|
|
// PrintConfig
|
|
// GCodeConfig
|
|
// HostConfig
|
|
//
|
|
|
|
#ifndef slic3r_PrintConfig_hpp_
|
|
#define slic3r_PrintConfig_hpp_
|
|
|
|
#include "libslic3r.h"
|
|
#include "Config.hpp"
|
|
|
|
// #define HAS_PRESSURE_EQUALIZER
|
|
|
|
namespace Slic3r {
|
|
|
|
enum GCodeFlavor : unsigned char {
|
|
gcfRepRap, gcfRepetier, gcfTeacup, gcfMakerWare, gcfMarlin, gcfSailfish, gcfMach3, gcfMachinekit,
|
|
gcfSmoothie, gcfNoExtrusion,
|
|
};
|
|
|
|
enum PrintHostType {
|
|
htOctoPrint, htDuet, htFlashAir
|
|
};
|
|
|
|
enum InfillPattern {
|
|
ipRectilinear, ipGrid, ipTriangles, ipStars, ipCubic, ipLine, ipConcentric, ipHoneycomb, ip3DHoneycomb,
|
|
ipGyroid, ipHilbertCurve, ipArchimedeanChords, ipOctagramSpiral, ipCount,
|
|
};
|
|
|
|
enum SupportMaterialPattern {
|
|
smpRectilinear, smpRectilinearGrid, smpHoneycomb,
|
|
};
|
|
|
|
enum SeamPosition {
|
|
spRandom, spNearest, spAligned, spRear
|
|
};
|
|
|
|
/*
|
|
enum FilamentType {
|
|
ftPLA, ftABS, ftPET, ftHIPS, ftFLEX, ftSCAFF, ftEDGE, ftNGEN, ftPVA
|
|
};
|
|
*/
|
|
|
|
enum SLAMaterial {
|
|
slamTough,
|
|
slamFlex,
|
|
slamCasting,
|
|
slamDental,
|
|
slamHeatResistant,
|
|
};
|
|
|
|
enum SLADisplayOrientation {
|
|
sladoLandscape,
|
|
sladoPortrait
|
|
};
|
|
|
|
enum SLAPillarConnectionMode {
|
|
slapcmZigZag,
|
|
slapcmCross,
|
|
slapcmDynamic
|
|
};
|
|
|
|
template<> inline const t_config_enum_values& ConfigOptionEnum<PrinterTechnology>::get_enum_values() {
|
|
static t_config_enum_values keys_map;
|
|
if (keys_map.empty()) {
|
|
keys_map["FFF"] = ptFFF;
|
|
keys_map["SLA"] = ptSLA;
|
|
}
|
|
return keys_map;
|
|
}
|
|
|
|
template<> inline const t_config_enum_values& ConfigOptionEnum<GCodeFlavor>::get_enum_values() {
|
|
static t_config_enum_values keys_map;
|
|
if (keys_map.empty()) {
|
|
keys_map["reprap"] = gcfRepRap;
|
|
keys_map["repetier"] = gcfRepetier;
|
|
keys_map["teacup"] = gcfTeacup;
|
|
keys_map["makerware"] = gcfMakerWare;
|
|
keys_map["marlin"] = gcfMarlin;
|
|
keys_map["sailfish"] = gcfSailfish;
|
|
keys_map["smoothie"] = gcfSmoothie;
|
|
keys_map["mach3"] = gcfMach3;
|
|
keys_map["machinekit"] = gcfMachinekit;
|
|
keys_map["no-extrusion"] = gcfNoExtrusion;
|
|
}
|
|
return keys_map;
|
|
}
|
|
|
|
template<> inline const t_config_enum_values& ConfigOptionEnum<PrintHostType>::get_enum_values() {
|
|
static t_config_enum_values keys_map;
|
|
if (keys_map.empty()) {
|
|
keys_map["octoprint"] = htOctoPrint;
|
|
keys_map["duet"] = htDuet;
|
|
keys_map["flashair"] = htFlashAir;
|
|
}
|
|
return keys_map;
|
|
}
|
|
|
|
template<> inline const t_config_enum_values& ConfigOptionEnum<InfillPattern>::get_enum_values() {
|
|
static t_config_enum_values keys_map;
|
|
if (keys_map.empty()) {
|
|
keys_map["rectilinear"] = ipRectilinear;
|
|
keys_map["grid"] = ipGrid;
|
|
keys_map["triangles"] = ipTriangles;
|
|
keys_map["stars"] = ipStars;
|
|
keys_map["cubic"] = ipCubic;
|
|
keys_map["line"] = ipLine;
|
|
keys_map["concentric"] = ipConcentric;
|
|
keys_map["honeycomb"] = ipHoneycomb;
|
|
keys_map["3dhoneycomb"] = ip3DHoneycomb;
|
|
keys_map["gyroid"] = ipGyroid;
|
|
keys_map["hilbertcurve"] = ipHilbertCurve;
|
|
keys_map["archimedeanchords"] = ipArchimedeanChords;
|
|
keys_map["octagramspiral"] = ipOctagramSpiral;
|
|
}
|
|
return keys_map;
|
|
}
|
|
|
|
template<> inline const t_config_enum_values& ConfigOptionEnum<SupportMaterialPattern>::get_enum_values() {
|
|
static t_config_enum_values keys_map;
|
|
if (keys_map.empty()) {
|
|
keys_map["rectilinear"] = smpRectilinear;
|
|
keys_map["rectilinear-grid"] = smpRectilinearGrid;
|
|
keys_map["honeycomb"] = smpHoneycomb;
|
|
}
|
|
return keys_map;
|
|
}
|
|
|
|
template<> inline const t_config_enum_values& ConfigOptionEnum<SeamPosition>::get_enum_values() {
|
|
static t_config_enum_values keys_map;
|
|
if (keys_map.empty()) {
|
|
keys_map["random"] = spRandom;
|
|
keys_map["nearest"] = spNearest;
|
|
keys_map["aligned"] = spAligned;
|
|
keys_map["rear"] = spRear;
|
|
}
|
|
return keys_map;
|
|
}
|
|
|
|
/*
|
|
template<> inline const t_config_enum_values& ConfigOptionEnum<FilamentType>::get_enum_values() {
|
|
static t_config_enum_values keys_map;
|
|
if (keys_map.empty()) {
|
|
keys_map["PLA"] = ftPLA;
|
|
keys_map["ABS"] = ftABS;
|
|
keys_map["PET"] = ftPET;
|
|
keys_map["HIPS"] = ftHIPS;
|
|
keys_map["FLEX"] = ftFLEX;
|
|
keys_map["SCAFF"] = ftSCAFF;
|
|
keys_map["EDGE"] = ftEDGE;
|
|
keys_map["NGEN"] = ftNGEN;
|
|
keys_map["PVA"] = ftPVA;
|
|
}
|
|
return keys_map;
|
|
}
|
|
*/
|
|
|
|
template<> inline const t_config_enum_values& ConfigOptionEnum<SLADisplayOrientation>::get_enum_values() {
|
|
static const t_config_enum_values keys_map = {
|
|
{ "landscape", sladoLandscape},
|
|
{ "portrait", sladoPortrait}
|
|
};
|
|
|
|
return keys_map;
|
|
}
|
|
|
|
template<> inline const t_config_enum_values& ConfigOptionEnum<SLAPillarConnectionMode>::get_enum_values() {
|
|
static const t_config_enum_values keys_map = {
|
|
{"zigzag", slapcmZigZag},
|
|
{"cross", slapcmCross},
|
|
{"dynamic", slapcmDynamic}
|
|
};
|
|
|
|
return keys_map;
|
|
}
|
|
|
|
// Defines each and every confiuration option of Slic3r, including the properties of the GUI dialogs.
|
|
// Does not store the actual values, but defines default values.
|
|
class PrintConfigDef : public ConfigDef
|
|
{
|
|
public:
|
|
PrintConfigDef();
|
|
|
|
static void handle_legacy(t_config_option_key &opt_key, std::string &value);
|
|
|
|
// Array options growing with the number of extruders
|
|
const std::vector<std::string>& extruder_option_keys() const { return m_extruder_option_keys; }
|
|
// Options defining the extruder retract properties. These keys are sorted lexicographically.
|
|
// The extruder retract keys could be overidden by the same values defined at the Filament level
|
|
// (then the key is further prefixed with the "filament_" prefix).
|
|
const std::vector<std::string>& extruder_retract_keys() const { return m_extruder_retract_keys; }
|
|
|
|
private:
|
|
void init_common_params();
|
|
void init_fff_params();
|
|
void init_extruder_option_keys();
|
|
void init_sla_params();
|
|
|
|
std::vector<std::string> m_extruder_option_keys;
|
|
std::vector<std::string> m_extruder_retract_keys;
|
|
};
|
|
|
|
// The one and only global definition of SLic3r configuration options.
|
|
// This definition is constant.
|
|
extern const PrintConfigDef print_config_def;
|
|
|
|
class StaticPrintConfig;
|
|
|
|
// Slic3r dynamic configuration, used to override the configuration
|
|
// per object, per modification volume or per printing material.
|
|
// The dynamic configuration is also used to store user modifications of the print global parameters,
|
|
// so the modified configuration values may be diffed against the active configuration
|
|
// to invalidate the proper slicing resp. g-code generation processing steps.
|
|
// This object is mapped to Perl as Slic3r::Config.
|
|
class DynamicPrintConfig : public DynamicConfig
|
|
{
|
|
public:
|
|
DynamicPrintConfig() {}
|
|
DynamicPrintConfig(const DynamicPrintConfig &rhs) : DynamicConfig(rhs) {}
|
|
explicit DynamicPrintConfig(const StaticPrintConfig &rhs);
|
|
explicit DynamicPrintConfig(const ConfigBase &rhs) : DynamicConfig(rhs) {}
|
|
|
|
static DynamicPrintConfig full_print_config();
|
|
static DynamicPrintConfig* new_from_defaults_keys(const std::vector<std::string> &keys);
|
|
|
|
// Overrides ConfigBase::def(). Static configuration definition. Any value stored into this ConfigBase shall have its definition here.
|
|
const ConfigDef* def() const override { return &print_config_def; }
|
|
|
|
void normalize();
|
|
|
|
void set_num_extruders(unsigned int num_extruders);
|
|
|
|
// Validate the PrintConfig. Returns an empty string on success, otherwise an error message is returned.
|
|
std::string validate();
|
|
|
|
// Verify whether the opt_key has not been obsoleted or renamed.
|
|
// Both opt_key and value may be modified by handle_legacy().
|
|
// If the opt_key is no more valid in this version of Slic3r, opt_key is cleared by handle_legacy().
|
|
// handle_legacy() is called internally by set_deserialize().
|
|
void handle_legacy(t_config_option_key &opt_key, std::string &value) const override
|
|
{ PrintConfigDef::handle_legacy(opt_key, value); }
|
|
};
|
|
|
|
template<typename CONFIG>
|
|
void normalize_and_apply_config(CONFIG &dst, const DynamicPrintConfig &src)
|
|
{
|
|
DynamicPrintConfig src_normalized(src);
|
|
src_normalized.normalize();
|
|
dst.apply(src_normalized, true);
|
|
}
|
|
|
|
class StaticPrintConfig : public StaticConfig
|
|
{
|
|
public:
|
|
StaticPrintConfig() {}
|
|
|
|
// Overrides ConfigBase::def(). Static configuration definition. Any value stored into this ConfigBase shall have its definition here.
|
|
const ConfigDef* def() const override { return &print_config_def; }
|
|
// Reference to the cached list of keys.
|
|
virtual const t_config_option_keys& keys_ref() const = 0;
|
|
|
|
protected:
|
|
// Verify whether the opt_key has not been obsoleted or renamed.
|
|
// Both opt_key and value may be modified by handle_legacy().
|
|
// If the opt_key is no more valid in this version of Slic3r, opt_key is cleared by handle_legacy().
|
|
// handle_legacy() is called internally by set_deserialize().
|
|
void handle_legacy(t_config_option_key &opt_key, std::string &value) const override
|
|
{ PrintConfigDef::handle_legacy(opt_key, value); }
|
|
|
|
// Internal class for keeping a dynamic map to static options.
|
|
class StaticCacheBase
|
|
{
|
|
public:
|
|
// To be called during the StaticCache setup.
|
|
// Add one ConfigOption into m_map_name_to_offset.
|
|
template<typename T>
|
|
void opt_add(const std::string &name, const char *base_ptr, const T &opt)
|
|
{
|
|
assert(m_map_name_to_offset.find(name) == m_map_name_to_offset.end());
|
|
m_map_name_to_offset[name] = (const char*)&opt - base_ptr;
|
|
}
|
|
|
|
protected:
|
|
std::map<std::string, ptrdiff_t> m_map_name_to_offset;
|
|
};
|
|
|
|
// Parametrized by the type of the topmost class owning the options.
|
|
template<typename T>
|
|
class StaticCache : public StaticCacheBase
|
|
{
|
|
public:
|
|
// Calling the constructor of m_defaults with 0 forces m_defaults to not run the initialization.
|
|
StaticCache() : m_defaults(nullptr) {}
|
|
~StaticCache() { delete m_defaults; m_defaults = nullptr; }
|
|
|
|
bool initialized() const { return ! m_keys.empty(); }
|
|
|
|
ConfigOption* optptr(const std::string &name, T *owner) const
|
|
{
|
|
const auto it = m_map_name_to_offset.find(name);
|
|
return (it == m_map_name_to_offset.end()) ? nullptr : reinterpret_cast<ConfigOption*>((char*)owner + it->second);
|
|
}
|
|
|
|
const ConfigOption* optptr(const std::string &name, const T *owner) const
|
|
{
|
|
const auto it = m_map_name_to_offset.find(name);
|
|
return (it == m_map_name_to_offset.end()) ? nullptr : reinterpret_cast<const ConfigOption*>((const char*)owner + it->second);
|
|
}
|
|
|
|
const std::vector<std::string>& keys() const { return m_keys; }
|
|
const T& defaults() const { return *m_defaults; }
|
|
|
|
// To be called during the StaticCache setup.
|
|
// Collect option keys from m_map_name_to_offset,
|
|
// assign default values to m_defaults.
|
|
void finalize(T *defaults, const ConfigDef *defs)
|
|
{
|
|
assert(defs != nullptr);
|
|
m_defaults = defaults;
|
|
m_keys.clear();
|
|
m_keys.reserve(m_map_name_to_offset.size());
|
|
for (const auto &kvp : defs->options) {
|
|
// Find the option given the option name kvp.first by an offset from (char*)m_defaults.
|
|
ConfigOption *opt = this->optptr(kvp.first, m_defaults);
|
|
if (opt == nullptr)
|
|
// This option is not defined by the ConfigBase of type T.
|
|
continue;
|
|
m_keys.emplace_back(kvp.first);
|
|
const ConfigOptionDef *def = defs->get(kvp.first);
|
|
assert(def != nullptr);
|
|
if (def->default_value)
|
|
opt->set(def->default_value.get());
|
|
}
|
|
}
|
|
|
|
private:
|
|
T *m_defaults;
|
|
std::vector<std::string> m_keys;
|
|
};
|
|
};
|
|
|
|
#define STATIC_PRINT_CONFIG_CACHE_BASE(CLASS_NAME) \
|
|
public: \
|
|
/* Overrides ConfigBase::optptr(). Find ando/or create a ConfigOption instance for a given name. */ \
|
|
ConfigOption* optptr(const t_config_option_key &opt_key, bool create = false) override \
|
|
{ return s_cache_##CLASS_NAME.optptr(opt_key, this); } \
|
|
/* Overrides ConfigBase::keys(). Collect names of all configuration values maintained by this configuration store. */ \
|
|
t_config_option_keys keys() const override { return s_cache_##CLASS_NAME.keys(); } \
|
|
const t_config_option_keys& keys_ref() const override { return s_cache_##CLASS_NAME.keys(); } \
|
|
static const CLASS_NAME& defaults() { initialize_cache(); return s_cache_##CLASS_NAME.defaults(); } \
|
|
private: \
|
|
static void initialize_cache() \
|
|
{ \
|
|
if (! s_cache_##CLASS_NAME.initialized()) { \
|
|
CLASS_NAME *inst = new CLASS_NAME(1); \
|
|
inst->initialize(s_cache_##CLASS_NAME, (const char*)inst); \
|
|
s_cache_##CLASS_NAME.finalize(inst, inst->def()); \
|
|
} \
|
|
} \
|
|
/* Cache object holding a key/option map, a list of option keys and a copy of this static config initialized with the defaults. */ \
|
|
static StaticPrintConfig::StaticCache<CLASS_NAME> s_cache_##CLASS_NAME;
|
|
|
|
#define STATIC_PRINT_CONFIG_CACHE(CLASS_NAME) \
|
|
STATIC_PRINT_CONFIG_CACHE_BASE(CLASS_NAME) \
|
|
public: \
|
|
/* Public default constructor will initialize the key/option cache and the default object copy if needed. */ \
|
|
CLASS_NAME() { initialize_cache(); *this = s_cache_##CLASS_NAME.defaults(); } \
|
|
protected: \
|
|
/* Protected constructor to be called when compounded. */ \
|
|
CLASS_NAME(int) {}
|
|
|
|
#define STATIC_PRINT_CONFIG_CACHE_DERIVED(CLASS_NAME) \
|
|
STATIC_PRINT_CONFIG_CACHE_BASE(CLASS_NAME) \
|
|
public: \
|
|
/* Overrides ConfigBase::def(). Static configuration definition. Any value stored into this ConfigBase shall have its definition here. */ \
|
|
const ConfigDef* def() const override { return &print_config_def; } \
|
|
/* Handle legacy and obsoleted config keys */ \
|
|
void handle_legacy(t_config_option_key &opt_key, std::string &value) const override \
|
|
{ PrintConfigDef::handle_legacy(opt_key, value); }
|
|
|
|
#define OPT_PTR(KEY) cache.opt_add(#KEY, base_ptr, this->KEY)
|
|
|
|
// This object is mapped to Perl as Slic3r::Config::PrintObject.
|
|
class PrintObjectConfig : public StaticPrintConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE(PrintObjectConfig)
|
|
public:
|
|
ConfigOptionBool clip_multipart_objects;
|
|
ConfigOptionBool dont_support_bridges;
|
|
ConfigOptionFloat elefant_foot_compensation;
|
|
ConfigOptionFloatOrPercent extrusion_width;
|
|
ConfigOptionFloatOrPercent first_layer_height;
|
|
ConfigOptionBool infill_only_where_needed;
|
|
// Force the generation of solid shells between adjacent materials/volumes.
|
|
ConfigOptionBool interface_shells;
|
|
ConfigOptionFloat layer_height;
|
|
ConfigOptionInt raft_layers;
|
|
ConfigOptionEnum<SeamPosition> seam_position;
|
|
// ConfigOptionFloat seam_preferred_direction;
|
|
// ConfigOptionFloat seam_preferred_direction_jitter;
|
|
ConfigOptionFloat slice_closing_radius;
|
|
ConfigOptionBool support_material;
|
|
// Automatic supports (generated based on support_material_threshold).
|
|
ConfigOptionBool support_material_auto;
|
|
// Direction of the support pattern (in XY plane).
|
|
ConfigOptionFloat support_material_angle;
|
|
ConfigOptionBool support_material_buildplate_only;
|
|
ConfigOptionFloat support_material_contact_distance;
|
|
ConfigOptionInt support_material_enforce_layers;
|
|
ConfigOptionInt support_material_extruder;
|
|
ConfigOptionFloatOrPercent support_material_extrusion_width;
|
|
ConfigOptionBool support_material_interface_contact_loops;
|
|
ConfigOptionInt support_material_interface_extruder;
|
|
ConfigOptionInt support_material_interface_layers;
|
|
// Spacing between interface lines (the hatching distance). Set zero to get a solid interface.
|
|
ConfigOptionFloat support_material_interface_spacing;
|
|
ConfigOptionFloatOrPercent support_material_interface_speed;
|
|
ConfigOptionEnum<SupportMaterialPattern> support_material_pattern;
|
|
// Spacing between support material lines (the hatching distance).
|
|
ConfigOptionFloat support_material_spacing;
|
|
ConfigOptionFloat support_material_speed;
|
|
ConfigOptionBool support_material_synchronize_layers;
|
|
// Overhang angle threshold.
|
|
ConfigOptionInt support_material_threshold;
|
|
ConfigOptionBool support_material_with_sheath;
|
|
ConfigOptionFloatOrPercent support_material_xy_spacing;
|
|
ConfigOptionFloat xy_size_compensation;
|
|
ConfigOptionBool wipe_into_objects;
|
|
|
|
protected:
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
OPT_PTR(clip_multipart_objects);
|
|
OPT_PTR(dont_support_bridges);
|
|
OPT_PTR(elefant_foot_compensation);
|
|
OPT_PTR(extrusion_width);
|
|
OPT_PTR(first_layer_height);
|
|
OPT_PTR(infill_only_where_needed);
|
|
OPT_PTR(interface_shells);
|
|
OPT_PTR(layer_height);
|
|
OPT_PTR(raft_layers);
|
|
OPT_PTR(seam_position);
|
|
OPT_PTR(slice_closing_radius);
|
|
// OPT_PTR(seam_preferred_direction);
|
|
// OPT_PTR(seam_preferred_direction_jitter);
|
|
OPT_PTR(support_material);
|
|
OPT_PTR(support_material_auto);
|
|
OPT_PTR(support_material_angle);
|
|
OPT_PTR(support_material_buildplate_only);
|
|
OPT_PTR(support_material_contact_distance);
|
|
OPT_PTR(support_material_enforce_layers);
|
|
OPT_PTR(support_material_interface_contact_loops);
|
|
OPT_PTR(support_material_extruder);
|
|
OPT_PTR(support_material_extrusion_width);
|
|
OPT_PTR(support_material_interface_extruder);
|
|
OPT_PTR(support_material_interface_layers);
|
|
OPT_PTR(support_material_interface_spacing);
|
|
OPT_PTR(support_material_interface_speed);
|
|
OPT_PTR(support_material_pattern);
|
|
OPT_PTR(support_material_spacing);
|
|
OPT_PTR(support_material_speed);
|
|
OPT_PTR(support_material_synchronize_layers);
|
|
OPT_PTR(support_material_xy_spacing);
|
|
OPT_PTR(support_material_threshold);
|
|
OPT_PTR(support_material_with_sheath);
|
|
OPT_PTR(xy_size_compensation);
|
|
OPT_PTR(wipe_into_objects);
|
|
}
|
|
};
|
|
|
|
// This object is mapped to Perl as Slic3r::Config::PrintRegion.
|
|
class PrintRegionConfig : public StaticPrintConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE(PrintRegionConfig)
|
|
public:
|
|
ConfigOptionFloat bridge_angle;
|
|
ConfigOptionInt bottom_solid_layers;
|
|
ConfigOptionFloat bridge_flow_ratio;
|
|
ConfigOptionFloat bridge_speed;
|
|
ConfigOptionBool ensure_vertical_shell_thickness;
|
|
ConfigOptionEnum<InfillPattern> top_fill_pattern;
|
|
ConfigOptionEnum<InfillPattern> bottom_fill_pattern;
|
|
ConfigOptionFloatOrPercent external_perimeter_extrusion_width;
|
|
ConfigOptionFloatOrPercent external_perimeter_speed;
|
|
ConfigOptionBool external_perimeters_first;
|
|
ConfigOptionBool extra_perimeters;
|
|
ConfigOptionFloat fill_angle;
|
|
ConfigOptionPercent fill_density;
|
|
ConfigOptionEnum<InfillPattern> fill_pattern;
|
|
ConfigOptionFloat gap_fill_speed;
|
|
ConfigOptionInt infill_extruder;
|
|
ConfigOptionFloatOrPercent infill_extrusion_width;
|
|
ConfigOptionInt infill_every_layers;
|
|
ConfigOptionFloatOrPercent infill_overlap;
|
|
ConfigOptionFloat infill_speed;
|
|
// Detect bridging perimeters
|
|
ConfigOptionBool overhangs;
|
|
ConfigOptionInt perimeter_extruder;
|
|
ConfigOptionFloatOrPercent perimeter_extrusion_width;
|
|
ConfigOptionFloat perimeter_speed;
|
|
// Total number of perimeters.
|
|
ConfigOptionInt perimeters;
|
|
ConfigOptionFloatOrPercent small_perimeter_speed;
|
|
ConfigOptionFloat solid_infill_below_area;
|
|
ConfigOptionInt solid_infill_extruder;
|
|
ConfigOptionFloatOrPercent solid_infill_extrusion_width;
|
|
ConfigOptionInt solid_infill_every_layers;
|
|
ConfigOptionFloatOrPercent solid_infill_speed;
|
|
// Detect thin walls.
|
|
ConfigOptionBool thin_walls;
|
|
ConfigOptionFloatOrPercent top_infill_extrusion_width;
|
|
ConfigOptionInt top_solid_layers;
|
|
ConfigOptionFloatOrPercent top_solid_infill_speed;
|
|
ConfigOptionBool wipe_into_infill;
|
|
|
|
protected:
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
OPT_PTR(bridge_angle);
|
|
OPT_PTR(bottom_solid_layers);
|
|
OPT_PTR(bridge_flow_ratio);
|
|
OPT_PTR(bridge_speed);
|
|
OPT_PTR(ensure_vertical_shell_thickness);
|
|
OPT_PTR(top_fill_pattern);
|
|
OPT_PTR(bottom_fill_pattern);
|
|
OPT_PTR(external_perimeter_extrusion_width);
|
|
OPT_PTR(external_perimeter_speed);
|
|
OPT_PTR(external_perimeters_first);
|
|
OPT_PTR(extra_perimeters);
|
|
OPT_PTR(fill_angle);
|
|
OPT_PTR(fill_density);
|
|
OPT_PTR(fill_pattern);
|
|
OPT_PTR(gap_fill_speed);
|
|
OPT_PTR(infill_extruder);
|
|
OPT_PTR(infill_extrusion_width);
|
|
OPT_PTR(infill_every_layers);
|
|
OPT_PTR(infill_overlap);
|
|
OPT_PTR(infill_speed);
|
|
OPT_PTR(overhangs);
|
|
OPT_PTR(perimeter_extruder);
|
|
OPT_PTR(perimeter_extrusion_width);
|
|
OPT_PTR(perimeter_speed);
|
|
OPT_PTR(perimeters);
|
|
OPT_PTR(small_perimeter_speed);
|
|
OPT_PTR(solid_infill_below_area);
|
|
OPT_PTR(solid_infill_extruder);
|
|
OPT_PTR(solid_infill_extrusion_width);
|
|
OPT_PTR(solid_infill_every_layers);
|
|
OPT_PTR(solid_infill_speed);
|
|
OPT_PTR(thin_walls);
|
|
OPT_PTR(top_infill_extrusion_width);
|
|
OPT_PTR(top_solid_infill_speed);
|
|
OPT_PTR(top_solid_layers);
|
|
OPT_PTR(wipe_into_infill);
|
|
}
|
|
};
|
|
|
|
class MachineEnvelopeConfig : public StaticPrintConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE(MachineEnvelopeConfig)
|
|
public:
|
|
// M201 X... Y... Z... E... [mm/sec^2]
|
|
ConfigOptionFloats machine_max_acceleration_x;
|
|
ConfigOptionFloats machine_max_acceleration_y;
|
|
ConfigOptionFloats machine_max_acceleration_z;
|
|
ConfigOptionFloats machine_max_acceleration_e;
|
|
// M203 X... Y... Z... E... [mm/sec]
|
|
ConfigOptionFloats machine_max_feedrate_x;
|
|
ConfigOptionFloats machine_max_feedrate_y;
|
|
ConfigOptionFloats machine_max_feedrate_z;
|
|
ConfigOptionFloats machine_max_feedrate_e;
|
|
// M204 S... [mm/sec^2]
|
|
ConfigOptionFloats machine_max_acceleration_extruding;
|
|
// M204 T... [mm/sec^2]
|
|
ConfigOptionFloats machine_max_acceleration_retracting;
|
|
// M205 X... Y... Z... E... [mm/sec]
|
|
ConfigOptionFloats machine_max_jerk_x;
|
|
ConfigOptionFloats machine_max_jerk_y;
|
|
ConfigOptionFloats machine_max_jerk_z;
|
|
ConfigOptionFloats machine_max_jerk_e;
|
|
// M205 T... [mm/sec]
|
|
ConfigOptionFloats machine_min_travel_rate;
|
|
// M205 S... [mm/sec]
|
|
ConfigOptionFloats machine_min_extruding_rate;
|
|
|
|
protected:
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
OPT_PTR(machine_max_acceleration_x);
|
|
OPT_PTR(machine_max_acceleration_y);
|
|
OPT_PTR(machine_max_acceleration_z);
|
|
OPT_PTR(machine_max_acceleration_e);
|
|
OPT_PTR(machine_max_feedrate_x);
|
|
OPT_PTR(machine_max_feedrate_y);
|
|
OPT_PTR(machine_max_feedrate_z);
|
|
OPT_PTR(machine_max_feedrate_e);
|
|
OPT_PTR(machine_max_acceleration_extruding);
|
|
OPT_PTR(machine_max_acceleration_retracting);
|
|
OPT_PTR(machine_max_jerk_x);
|
|
OPT_PTR(machine_max_jerk_y);
|
|
OPT_PTR(machine_max_jerk_z);
|
|
OPT_PTR(machine_max_jerk_e);
|
|
OPT_PTR(machine_min_travel_rate);
|
|
OPT_PTR(machine_min_extruding_rate);
|
|
}
|
|
};
|
|
|
|
// This object is mapped to Perl as Slic3r::Config::GCode.
|
|
class GCodeConfig : public StaticPrintConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE(GCodeConfig)
|
|
public:
|
|
ConfigOptionString before_layer_gcode;
|
|
ConfigOptionString between_objects_gcode;
|
|
ConfigOptionFloats deretract_speed;
|
|
ConfigOptionString end_gcode;
|
|
ConfigOptionStrings end_filament_gcode;
|
|
ConfigOptionString extrusion_axis;
|
|
ConfigOptionFloats extrusion_multiplier;
|
|
ConfigOptionFloats filament_diameter;
|
|
ConfigOptionFloats filament_density;
|
|
ConfigOptionStrings filament_type;
|
|
ConfigOptionBools filament_soluble;
|
|
ConfigOptionFloats filament_cost;
|
|
ConfigOptionFloats filament_max_volumetric_speed;
|
|
ConfigOptionFloats filament_loading_speed;
|
|
ConfigOptionFloats filament_loading_speed_start;
|
|
ConfigOptionFloats filament_load_time;
|
|
ConfigOptionFloats filament_unloading_speed;
|
|
ConfigOptionFloats filament_unloading_speed_start;
|
|
ConfigOptionFloats filament_toolchange_delay;
|
|
ConfigOptionFloats filament_unload_time;
|
|
ConfigOptionInts filament_cooling_moves;
|
|
ConfigOptionFloats filament_cooling_initial_speed;
|
|
ConfigOptionFloats filament_minimal_purge_on_wipe_tower;
|
|
ConfigOptionFloats filament_cooling_final_speed;
|
|
ConfigOptionStrings filament_ramming_parameters;
|
|
ConfigOptionBool gcode_comments;
|
|
ConfigOptionEnum<GCodeFlavor> gcode_flavor;
|
|
ConfigOptionBool gcode_label_objects;
|
|
ConfigOptionString layer_gcode;
|
|
ConfigOptionFloat max_print_speed;
|
|
ConfigOptionFloat max_volumetric_speed;
|
|
#ifdef HAS_PRESSURE_EQUALIZER
|
|
ConfigOptionFloat max_volumetric_extrusion_rate_slope_positive;
|
|
ConfigOptionFloat max_volumetric_extrusion_rate_slope_negative;
|
|
#endif
|
|
ConfigOptionPercents retract_before_wipe;
|
|
ConfigOptionFloats retract_length;
|
|
ConfigOptionFloats retract_length_toolchange;
|
|
ConfigOptionFloats retract_lift;
|
|
ConfigOptionFloats retract_lift_above;
|
|
ConfigOptionFloats retract_lift_below;
|
|
ConfigOptionFloats retract_restart_extra;
|
|
ConfigOptionFloats retract_restart_extra_toolchange;
|
|
ConfigOptionFloats retract_speed;
|
|
ConfigOptionString start_gcode;
|
|
ConfigOptionStrings start_filament_gcode;
|
|
ConfigOptionBool single_extruder_multi_material;
|
|
ConfigOptionBool single_extruder_multi_material_priming;
|
|
ConfigOptionString toolchange_gcode;
|
|
ConfigOptionFloat travel_speed;
|
|
ConfigOptionBool use_firmware_retraction;
|
|
ConfigOptionBool use_relative_e_distances;
|
|
ConfigOptionBool use_volumetric_e;
|
|
ConfigOptionBool variable_layer_height;
|
|
ConfigOptionFloat cooling_tube_retraction;
|
|
ConfigOptionFloat cooling_tube_length;
|
|
ConfigOptionBool high_current_on_filament_swap;
|
|
ConfigOptionFloat parking_pos_retraction;
|
|
ConfigOptionBool remaining_times;
|
|
ConfigOptionBool silent_mode;
|
|
ConfigOptionFloat extra_loading_move;
|
|
|
|
std::string get_extrusion_axis() const
|
|
{
|
|
return
|
|
((this->gcode_flavor.value == gcfMach3) || (this->gcode_flavor.value == gcfMachinekit)) ? "A" :
|
|
(this->gcode_flavor.value == gcfNoExtrusion) ? "" : this->extrusion_axis.value;
|
|
}
|
|
|
|
protected:
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
OPT_PTR(before_layer_gcode);
|
|
OPT_PTR(between_objects_gcode);
|
|
OPT_PTR(deretract_speed);
|
|
OPT_PTR(end_gcode);
|
|
OPT_PTR(end_filament_gcode);
|
|
OPT_PTR(extrusion_axis);
|
|
OPT_PTR(extrusion_multiplier);
|
|
OPT_PTR(filament_diameter);
|
|
OPT_PTR(filament_density);
|
|
OPT_PTR(filament_type);
|
|
OPT_PTR(filament_soluble);
|
|
OPT_PTR(filament_cost);
|
|
OPT_PTR(filament_max_volumetric_speed);
|
|
OPT_PTR(filament_loading_speed);
|
|
OPT_PTR(filament_loading_speed_start);
|
|
OPT_PTR(filament_load_time);
|
|
OPT_PTR(filament_unloading_speed);
|
|
OPT_PTR(filament_unloading_speed_start);
|
|
OPT_PTR(filament_unload_time);
|
|
OPT_PTR(filament_toolchange_delay);
|
|
OPT_PTR(filament_cooling_moves);
|
|
OPT_PTR(filament_cooling_initial_speed);
|
|
OPT_PTR(filament_minimal_purge_on_wipe_tower);
|
|
OPT_PTR(filament_cooling_final_speed);
|
|
OPT_PTR(filament_ramming_parameters);
|
|
OPT_PTR(gcode_comments);
|
|
OPT_PTR(gcode_flavor);
|
|
OPT_PTR(gcode_label_objects);
|
|
OPT_PTR(layer_gcode);
|
|
OPT_PTR(max_print_speed);
|
|
OPT_PTR(max_volumetric_speed);
|
|
#ifdef HAS_PRESSURE_EQUALIZER
|
|
OPT_PTR(max_volumetric_extrusion_rate_slope_positive);
|
|
OPT_PTR(max_volumetric_extrusion_rate_slope_negative);
|
|
#endif /* HAS_PRESSURE_EQUALIZER */
|
|
OPT_PTR(retract_before_wipe);
|
|
OPT_PTR(retract_length);
|
|
OPT_PTR(retract_length_toolchange);
|
|
OPT_PTR(retract_lift);
|
|
OPT_PTR(retract_lift_above);
|
|
OPT_PTR(retract_lift_below);
|
|
OPT_PTR(retract_restart_extra);
|
|
OPT_PTR(retract_restart_extra_toolchange);
|
|
OPT_PTR(retract_speed);
|
|
OPT_PTR(single_extruder_multi_material);
|
|
OPT_PTR(single_extruder_multi_material_priming);
|
|
OPT_PTR(start_gcode);
|
|
OPT_PTR(start_filament_gcode);
|
|
OPT_PTR(toolchange_gcode);
|
|
OPT_PTR(travel_speed);
|
|
OPT_PTR(use_firmware_retraction);
|
|
OPT_PTR(use_relative_e_distances);
|
|
OPT_PTR(use_volumetric_e);
|
|
OPT_PTR(variable_layer_height);
|
|
OPT_PTR(cooling_tube_retraction);
|
|
OPT_PTR(cooling_tube_length);
|
|
OPT_PTR(high_current_on_filament_swap);
|
|
OPT_PTR(parking_pos_retraction);
|
|
OPT_PTR(remaining_times);
|
|
OPT_PTR(silent_mode);
|
|
OPT_PTR(extra_loading_move);
|
|
}
|
|
};
|
|
|
|
// This object is mapped to Perl as Slic3r::Config::Print.
|
|
class PrintConfig : public MachineEnvelopeConfig, public GCodeConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE_DERIVED(PrintConfig)
|
|
PrintConfig() : MachineEnvelopeConfig(0), GCodeConfig(0) { initialize_cache(); *this = s_cache_PrintConfig.defaults(); }
|
|
public:
|
|
double min_object_distance() const;
|
|
static double min_object_distance(const ConfigBase *config);
|
|
|
|
ConfigOptionBool avoid_crossing_perimeters;
|
|
ConfigOptionPoints bed_shape;
|
|
ConfigOptionInts bed_temperature;
|
|
ConfigOptionFloat bridge_acceleration;
|
|
ConfigOptionInts bridge_fan_speed;
|
|
ConfigOptionFloat brim_width;
|
|
ConfigOptionBool complete_objects;
|
|
ConfigOptionFloats colorprint_heights;
|
|
ConfigOptionBools cooling;
|
|
ConfigOptionFloat default_acceleration;
|
|
ConfigOptionInts disable_fan_first_layers;
|
|
ConfigOptionFloat duplicate_distance;
|
|
ConfigOptionFloat extruder_clearance_height;
|
|
ConfigOptionFloat extruder_clearance_radius;
|
|
ConfigOptionStrings extruder_colour;
|
|
ConfigOptionPoints extruder_offset;
|
|
ConfigOptionBools fan_always_on;
|
|
ConfigOptionInts fan_below_layer_time;
|
|
ConfigOptionStrings filament_colour;
|
|
ConfigOptionStrings filament_notes;
|
|
ConfigOptionFloat first_layer_acceleration;
|
|
ConfigOptionInts first_layer_bed_temperature;
|
|
ConfigOptionFloatOrPercent first_layer_extrusion_width;
|
|
ConfigOptionFloatOrPercent first_layer_speed;
|
|
ConfigOptionInts first_layer_temperature;
|
|
ConfigOptionFloat infill_acceleration;
|
|
ConfigOptionBool infill_first;
|
|
ConfigOptionInts max_fan_speed;
|
|
ConfigOptionFloats max_layer_height;
|
|
ConfigOptionInts min_fan_speed;
|
|
ConfigOptionFloats min_layer_height;
|
|
ConfigOptionFloat max_print_height;
|
|
ConfigOptionFloats min_print_speed;
|
|
ConfigOptionFloat min_skirt_length;
|
|
ConfigOptionString notes;
|
|
ConfigOptionFloats nozzle_diameter;
|
|
ConfigOptionBool only_retract_when_crossing_perimeters;
|
|
ConfigOptionBool ooze_prevention;
|
|
ConfigOptionString output_filename_format;
|
|
ConfigOptionFloat perimeter_acceleration;
|
|
ConfigOptionStrings post_process;
|
|
ConfigOptionString printer_model;
|
|
ConfigOptionString printer_notes;
|
|
ConfigOptionFloat resolution;
|
|
ConfigOptionFloats retract_before_travel;
|
|
ConfigOptionBools retract_layer_change;
|
|
ConfigOptionFloat skirt_distance;
|
|
ConfigOptionInt skirt_height;
|
|
ConfigOptionInt skirts;
|
|
ConfigOptionInts slowdown_below_layer_time;
|
|
ConfigOptionBool spiral_vase;
|
|
ConfigOptionInt standby_temperature_delta;
|
|
ConfigOptionInts temperature;
|
|
ConfigOptionInt threads;
|
|
ConfigOptionBools wipe;
|
|
ConfigOptionBool wipe_tower;
|
|
ConfigOptionFloat wipe_tower_x;
|
|
ConfigOptionFloat wipe_tower_y;
|
|
ConfigOptionFloat wipe_tower_width;
|
|
ConfigOptionFloat wipe_tower_per_color_wipe;
|
|
ConfigOptionFloat wipe_tower_rotation_angle;
|
|
ConfigOptionFloat wipe_tower_bridging;
|
|
ConfigOptionFloats wiping_volumes_matrix;
|
|
ConfigOptionFloats wiping_volumes_extruders;
|
|
ConfigOptionFloat z_offset;
|
|
|
|
protected:
|
|
PrintConfig(int) : MachineEnvelopeConfig(1), GCodeConfig(1) {}
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
this->MachineEnvelopeConfig::initialize(cache, base_ptr);
|
|
this->GCodeConfig::initialize(cache, base_ptr);
|
|
OPT_PTR(avoid_crossing_perimeters);
|
|
OPT_PTR(bed_shape);
|
|
OPT_PTR(bed_temperature);
|
|
OPT_PTR(bridge_acceleration);
|
|
OPT_PTR(bridge_fan_speed);
|
|
OPT_PTR(brim_width);
|
|
OPT_PTR(complete_objects);
|
|
OPT_PTR(colorprint_heights);
|
|
OPT_PTR(cooling);
|
|
OPT_PTR(default_acceleration);
|
|
OPT_PTR(disable_fan_first_layers);
|
|
OPT_PTR(duplicate_distance);
|
|
OPT_PTR(extruder_clearance_height);
|
|
OPT_PTR(extruder_clearance_radius);
|
|
OPT_PTR(extruder_colour);
|
|
OPT_PTR(extruder_offset);
|
|
OPT_PTR(fan_always_on);
|
|
OPT_PTR(fan_below_layer_time);
|
|
OPT_PTR(filament_colour);
|
|
OPT_PTR(filament_notes);
|
|
OPT_PTR(first_layer_acceleration);
|
|
OPT_PTR(first_layer_bed_temperature);
|
|
OPT_PTR(first_layer_extrusion_width);
|
|
OPT_PTR(first_layer_speed);
|
|
OPT_PTR(first_layer_temperature);
|
|
OPT_PTR(infill_acceleration);
|
|
OPT_PTR(infill_first);
|
|
OPT_PTR(max_fan_speed);
|
|
OPT_PTR(max_layer_height);
|
|
OPT_PTR(min_fan_speed);
|
|
OPT_PTR(min_layer_height);
|
|
OPT_PTR(max_print_height);
|
|
OPT_PTR(min_print_speed);
|
|
OPT_PTR(min_skirt_length);
|
|
OPT_PTR(notes);
|
|
OPT_PTR(nozzle_diameter);
|
|
OPT_PTR(only_retract_when_crossing_perimeters);
|
|
OPT_PTR(ooze_prevention);
|
|
OPT_PTR(output_filename_format);
|
|
OPT_PTR(perimeter_acceleration);
|
|
OPT_PTR(post_process);
|
|
OPT_PTR(printer_model);
|
|
OPT_PTR(printer_notes);
|
|
OPT_PTR(resolution);
|
|
OPT_PTR(retract_before_travel);
|
|
OPT_PTR(retract_layer_change);
|
|
OPT_PTR(skirt_distance);
|
|
OPT_PTR(skirt_height);
|
|
OPT_PTR(skirts);
|
|
OPT_PTR(slowdown_below_layer_time);
|
|
OPT_PTR(spiral_vase);
|
|
OPT_PTR(standby_temperature_delta);
|
|
OPT_PTR(temperature);
|
|
OPT_PTR(threads);
|
|
OPT_PTR(wipe);
|
|
OPT_PTR(wipe_tower);
|
|
OPT_PTR(wipe_tower_x);
|
|
OPT_PTR(wipe_tower_y);
|
|
OPT_PTR(wipe_tower_width);
|
|
OPT_PTR(wipe_tower_per_color_wipe);
|
|
OPT_PTR(wipe_tower_rotation_angle);
|
|
OPT_PTR(wipe_tower_bridging);
|
|
OPT_PTR(wiping_volumes_matrix);
|
|
OPT_PTR(wiping_volumes_extruders);
|
|
OPT_PTR(z_offset);
|
|
}
|
|
};
|
|
|
|
class HostConfig : public StaticPrintConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE(HostConfig)
|
|
public:
|
|
ConfigOptionEnum<PrintHostType> host_type;
|
|
ConfigOptionString print_host;
|
|
ConfigOptionString printhost_apikey;
|
|
ConfigOptionString printhost_cafile;
|
|
ConfigOptionString serial_port;
|
|
ConfigOptionInt serial_speed;
|
|
|
|
protected:
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
OPT_PTR(host_type);
|
|
OPT_PTR(print_host);
|
|
OPT_PTR(printhost_apikey);
|
|
OPT_PTR(printhost_cafile);
|
|
OPT_PTR(serial_port);
|
|
OPT_PTR(serial_speed);
|
|
}
|
|
};
|
|
|
|
// This object is mapped to Perl as Slic3r::Config::Full.
|
|
class FullPrintConfig :
|
|
public PrintObjectConfig,
|
|
public PrintRegionConfig,
|
|
public PrintConfig,
|
|
public HostConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE_DERIVED(FullPrintConfig)
|
|
FullPrintConfig() : PrintObjectConfig(0), PrintRegionConfig(0), PrintConfig(0), HostConfig(0) { initialize_cache(); *this = s_cache_FullPrintConfig.defaults(); }
|
|
|
|
public:
|
|
// Validate the FullPrintConfig. Returns an empty string on success, otherwise an error message is returned.
|
|
std::string validate();
|
|
|
|
protected:
|
|
// Protected constructor to be called to initialize ConfigCache::m_default.
|
|
FullPrintConfig(int) : PrintObjectConfig(0), PrintRegionConfig(0), PrintConfig(0), HostConfig(0) {}
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
this->PrintObjectConfig::initialize(cache, base_ptr);
|
|
this->PrintRegionConfig::initialize(cache, base_ptr);
|
|
this->PrintConfig ::initialize(cache, base_ptr);
|
|
this->HostConfig ::initialize(cache, base_ptr);
|
|
}
|
|
};
|
|
|
|
// This object is mapped to Perl as Slic3r::Config::PrintRegion.
|
|
class SLAPrintConfig : public StaticPrintConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE(SLAPrintConfig)
|
|
public:
|
|
ConfigOptionString output_filename_format;
|
|
|
|
protected:
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
OPT_PTR(output_filename_format);
|
|
}
|
|
};
|
|
|
|
class SLAPrintObjectConfig : public StaticPrintConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE(SLAPrintObjectConfig)
|
|
public:
|
|
ConfigOptionFloat layer_height;
|
|
|
|
//Number of the layers needed for the exposure time fade [3;20]
|
|
ConfigOptionInt faded_layers /*= 10*/;
|
|
|
|
ConfigOptionFloat slice_closing_radius;
|
|
|
|
// Enabling or disabling support creation
|
|
ConfigOptionBool supports_enable;
|
|
|
|
// Diameter in mm of the pointing side of the head.
|
|
ConfigOptionFloat support_head_front_diameter /*= 0.2*/;
|
|
|
|
// How much the pinhead has to penetrate the model surface
|
|
ConfigOptionFloat support_head_penetration /*= 0.2*/;
|
|
|
|
// Width in mm from the back sphere center to the front sphere center.
|
|
ConfigOptionFloat support_head_width /*= 1.0*/;
|
|
|
|
// Radius in mm of the support pillars.
|
|
ConfigOptionFloat support_pillar_diameter /*= 0.8*/;
|
|
|
|
// How the pillars are bridged together
|
|
ConfigOptionEnum<SLAPillarConnectionMode> support_pillar_connection_mode;
|
|
|
|
// Generate only ground facing supports
|
|
ConfigOptionBool support_buildplate_only;
|
|
|
|
// TODO: unimplemented at the moment. This coefficient will have an impact
|
|
// when bridges and pillars are merged. The resulting pillar should be a bit
|
|
// thicker than the ones merging into it. How much thicker? I don't know
|
|
// but it will be derived from this value.
|
|
ConfigOptionFloat support_pillar_widening_factor;
|
|
|
|
// Radius in mm of the pillar base.
|
|
ConfigOptionFloat support_base_diameter /*= 2.0*/;
|
|
|
|
// The height of the pillar base cone in mm.
|
|
ConfigOptionFloat support_base_height /*= 1.0*/;
|
|
|
|
// The minimum distance of the pillar base from the model in mm.
|
|
ConfigOptionFloat support_base_safety_distance; /*= 1.0*/
|
|
|
|
// The default angle for connecting support sticks and junctions.
|
|
ConfigOptionFloat support_critical_angle /*= 45*/;
|
|
|
|
// The max length of a bridge in mm
|
|
ConfigOptionFloat support_max_bridge_length /*= 15.0*/;
|
|
|
|
// The max distance of two pillars to get cross linked.
|
|
ConfigOptionFloat support_max_pillar_link_distance;
|
|
|
|
// The elevation in Z direction upwards. This is the space between the pad
|
|
// and the model object's bounding box bottom. Units in mm.
|
|
ConfigOptionFloat support_object_elevation /*= 5.0*/;
|
|
|
|
/////// Following options influence automatic support points placement:
|
|
ConfigOptionInt support_points_density_relative;
|
|
ConfigOptionFloat support_points_minimal_distance;
|
|
|
|
// Now for the base pool (pad) /////////////////////////////////////////////
|
|
|
|
// Enabling or disabling support creation
|
|
ConfigOptionBool pad_enable;
|
|
|
|
// The thickness of the pad walls
|
|
ConfigOptionFloat pad_wall_thickness /*= 2*/;
|
|
|
|
// The height of the pad from the bottom to the top not considering the pit
|
|
ConfigOptionFloat pad_wall_height /*= 5*/;
|
|
|
|
// How far should the pad extend around the contained geometry
|
|
ConfigOptionFloat pad_brim_size;
|
|
|
|
// The greatest distance where two individual pads are merged into one. The
|
|
// distance is measured roughly from the centroids of the pads.
|
|
ConfigOptionFloat pad_max_merge_distance /*= 50*/;
|
|
|
|
// The smoothing radius of the pad edges
|
|
// ConfigOptionFloat pad_edge_radius /*= 1*/;
|
|
|
|
// The slope of the pad wall...
|
|
ConfigOptionFloat pad_wall_slope;
|
|
|
|
// /////////////////////////////////////////////////////////////////////////
|
|
// Zero elevation mode parameters:
|
|
// - The object pad will be derived from the model geometry.
|
|
// - There will be a gap between the object pad and the generated pad
|
|
// according to the support_base_safety_distance parameter.
|
|
// - The two pads will be connected with tiny connector sticks
|
|
// /////////////////////////////////////////////////////////////////////////
|
|
|
|
// Disable the elevation (ignore its value) and use the zero elevation mode
|
|
ConfigOptionBool pad_around_object;
|
|
|
|
ConfigOptionBool pad_around_object_everywhere;
|
|
|
|
// This is the gap between the object bottom and the generated pad
|
|
ConfigOptionFloat pad_object_gap;
|
|
|
|
// How far to place the connector sticks on the object pad perimeter
|
|
ConfigOptionFloat pad_object_connector_stride;
|
|
|
|
// The width of the connectors sticks
|
|
ConfigOptionFloat pad_object_connector_width;
|
|
|
|
// How much should the tiny connectors penetrate into the model body
|
|
ConfigOptionFloat pad_object_connector_penetration;
|
|
|
|
// /////////////////////////////////////////////////////////////////////////
|
|
// Model hollowing parameters:
|
|
// - Models can be hollowed out as part of the SLA print process
|
|
// - Thickness of the hollowed model walls can be adjusted
|
|
// -
|
|
// - Additional holes will be drilled into the hollow model to allow for
|
|
// - resin removal.
|
|
// /////////////////////////////////////////////////////////////////////////
|
|
|
|
ConfigOptionBool hollowing_enable;
|
|
|
|
// The minimum thickness of the model walls to maintain. Note that the
|
|
// resulting walls may be thicker due to smoothing out fine cavities where
|
|
// resin could stuck.
|
|
ConfigOptionFloat hollowing_min_thickness;
|
|
|
|
// Indirectly controls the voxel size (resolution) used by openvdb
|
|
ConfigOptionFloat hollowing_accuracy;
|
|
|
|
// Indirectly controls the amount of filtering used to blur geometry
|
|
// features in the created cavity.
|
|
ConfigOptionFloat hollowing_smoothness;
|
|
|
|
protected:
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
OPT_PTR(layer_height);
|
|
OPT_PTR(faded_layers);
|
|
OPT_PTR(slice_closing_radius);
|
|
OPT_PTR(supports_enable);
|
|
OPT_PTR(support_head_front_diameter);
|
|
OPT_PTR(support_head_penetration);
|
|
OPT_PTR(support_head_width);
|
|
OPT_PTR(support_pillar_diameter);
|
|
OPT_PTR(support_pillar_connection_mode);
|
|
OPT_PTR(support_buildplate_only);
|
|
OPT_PTR(support_pillar_widening_factor);
|
|
OPT_PTR(support_base_diameter);
|
|
OPT_PTR(support_base_height);
|
|
OPT_PTR(support_base_safety_distance);
|
|
OPT_PTR(support_critical_angle);
|
|
OPT_PTR(support_max_bridge_length);
|
|
OPT_PTR(support_max_pillar_link_distance);
|
|
OPT_PTR(support_points_density_relative);
|
|
OPT_PTR(support_points_minimal_distance);
|
|
OPT_PTR(support_object_elevation);
|
|
OPT_PTR(pad_enable);
|
|
OPT_PTR(pad_wall_thickness);
|
|
OPT_PTR(pad_wall_height);
|
|
OPT_PTR(pad_brim_size);
|
|
OPT_PTR(pad_max_merge_distance);
|
|
// OPT_PTR(pad_edge_radius);
|
|
OPT_PTR(pad_wall_slope);
|
|
OPT_PTR(pad_around_object);
|
|
OPT_PTR(pad_around_object_everywhere);
|
|
OPT_PTR(pad_object_gap);
|
|
OPT_PTR(pad_object_connector_stride);
|
|
OPT_PTR(pad_object_connector_width);
|
|
OPT_PTR(pad_object_connector_penetration);
|
|
OPT_PTR(hollowing_enable);
|
|
OPT_PTR(hollowing_min_thickness);
|
|
OPT_PTR(hollowing_accuracy);
|
|
OPT_PTR(hollowing_smoothness);
|
|
}
|
|
};
|
|
|
|
class SLAMaterialConfig : public StaticPrintConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE(SLAMaterialConfig)
|
|
public:
|
|
ConfigOptionFloat initial_layer_height;
|
|
ConfigOptionFloat exposure_time;
|
|
ConfigOptionFloat initial_exposure_time;
|
|
ConfigOptionFloats material_correction;
|
|
protected:
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
OPT_PTR(initial_layer_height);
|
|
OPT_PTR(exposure_time);
|
|
OPT_PTR(initial_exposure_time);
|
|
OPT_PTR(material_correction);
|
|
}
|
|
};
|
|
|
|
class SLAPrinterConfig : public StaticPrintConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE(SLAPrinterConfig)
|
|
public:
|
|
ConfigOptionEnum<PrinterTechnology> printer_technology;
|
|
ConfigOptionPoints bed_shape;
|
|
ConfigOptionFloat max_print_height;
|
|
ConfigOptionFloat display_width;
|
|
ConfigOptionFloat display_height;
|
|
ConfigOptionInt display_pixels_x;
|
|
ConfigOptionInt display_pixels_y;
|
|
ConfigOptionEnum<SLADisplayOrientation> display_orientation;
|
|
ConfigOptionBool display_mirror_x;
|
|
ConfigOptionBool display_mirror_y;
|
|
ConfigOptionFloats relative_correction;
|
|
ConfigOptionFloat absolute_correction;
|
|
ConfigOptionFloat gamma_correction;
|
|
ConfigOptionFloat fast_tilt_time;
|
|
ConfigOptionFloat slow_tilt_time;
|
|
ConfigOptionFloat area_fill;
|
|
ConfigOptionFloat min_exposure_time;
|
|
ConfigOptionFloat max_exposure_time;
|
|
ConfigOptionFloat min_initial_exposure_time;
|
|
ConfigOptionFloat max_initial_exposure_time;
|
|
protected:
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
OPT_PTR(printer_technology);
|
|
OPT_PTR(bed_shape);
|
|
OPT_PTR(max_print_height);
|
|
OPT_PTR(display_width);
|
|
OPT_PTR(display_height);
|
|
OPT_PTR(display_pixels_x);
|
|
OPT_PTR(display_pixels_y);
|
|
OPT_PTR(display_mirror_x);
|
|
OPT_PTR(display_mirror_y);
|
|
OPT_PTR(display_orientation);
|
|
OPT_PTR(relative_correction);
|
|
OPT_PTR(absolute_correction);
|
|
OPT_PTR(gamma_correction);
|
|
OPT_PTR(fast_tilt_time);
|
|
OPT_PTR(slow_tilt_time);
|
|
OPT_PTR(area_fill);
|
|
OPT_PTR(min_exposure_time);
|
|
OPT_PTR(max_exposure_time);
|
|
OPT_PTR(min_initial_exposure_time);
|
|
OPT_PTR(max_initial_exposure_time);
|
|
}
|
|
};
|
|
|
|
class SLAFullPrintConfig : public SLAPrinterConfig, public SLAPrintConfig, public SLAPrintObjectConfig, public SLAMaterialConfig
|
|
{
|
|
STATIC_PRINT_CONFIG_CACHE_DERIVED(SLAFullPrintConfig)
|
|
SLAFullPrintConfig() : SLAPrinterConfig(0), SLAPrintConfig(0), SLAPrintObjectConfig(0), SLAMaterialConfig(0) { initialize_cache(); *this = s_cache_SLAFullPrintConfig.defaults(); }
|
|
|
|
public:
|
|
// Validate the SLAFullPrintConfig. Returns an empty string on success, otherwise an error message is returned.
|
|
// std::string validate();
|
|
|
|
protected:
|
|
// Protected constructor to be called to initialize ConfigCache::m_default.
|
|
SLAFullPrintConfig(int) : SLAPrinterConfig(0), SLAPrintConfig(0), SLAPrintObjectConfig(0), SLAMaterialConfig(0) {}
|
|
void initialize(StaticCacheBase &cache, const char *base_ptr)
|
|
{
|
|
this->SLAPrinterConfig ::initialize(cache, base_ptr);
|
|
this->SLAPrintConfig ::initialize(cache, base_ptr);
|
|
this->SLAPrintObjectConfig::initialize(cache, base_ptr);
|
|
this->SLAMaterialConfig ::initialize(cache, base_ptr);
|
|
}
|
|
};
|
|
|
|
#undef STATIC_PRINT_CONFIG_CACHE
|
|
#undef STATIC_PRINT_CONFIG_CACHE_BASE
|
|
#undef STATIC_PRINT_CONFIG_CACHE_DERIVED
|
|
#undef OPT_PTR
|
|
|
|
class CLIActionsConfigDef : public ConfigDef
|
|
{
|
|
public:
|
|
CLIActionsConfigDef();
|
|
};
|
|
|
|
class CLITransformConfigDef : public ConfigDef
|
|
{
|
|
public:
|
|
CLITransformConfigDef();
|
|
};
|
|
|
|
class CLIMiscConfigDef : public ConfigDef
|
|
{
|
|
public:
|
|
CLIMiscConfigDef();
|
|
};
|
|
|
|
// This class defines the command line options representing actions.
|
|
extern const CLIActionsConfigDef cli_actions_config_def;
|
|
|
|
// This class defines the command line options representing transforms.
|
|
extern const CLITransformConfigDef cli_transform_config_def;
|
|
|
|
// This class defines all command line options that are not actions or transforms.
|
|
extern const CLIMiscConfigDef cli_misc_config_def;
|
|
|
|
class DynamicPrintAndCLIConfig : public DynamicPrintConfig
|
|
{
|
|
public:
|
|
DynamicPrintAndCLIConfig() {}
|
|
DynamicPrintAndCLIConfig(const DynamicPrintAndCLIConfig &other) : DynamicPrintConfig(other) {}
|
|
|
|
// Overrides ConfigBase::def(). Static configuration definition. Any value stored into this ConfigBase shall have its definition here.
|
|
const ConfigDef* def() const override { return &s_def; }
|
|
|
|
// Verify whether the opt_key has not been obsoleted or renamed.
|
|
// Both opt_key and value may be modified by handle_legacy().
|
|
// If the opt_key is no more valid in this version of Slic3r, opt_key is cleared by handle_legacy().
|
|
// handle_legacy() is called internally by set_deserialize().
|
|
void handle_legacy(t_config_option_key &opt_key, std::string &value) const override;
|
|
|
|
private:
|
|
class PrintAndCLIConfigDef : public ConfigDef
|
|
{
|
|
public:
|
|
PrintAndCLIConfigDef() {
|
|
this->options.insert(print_config_def.options.begin(), print_config_def.options.end());
|
|
this->options.insert(cli_actions_config_def.options.begin(), cli_actions_config_def.options.end());
|
|
this->options.insert(cli_transform_config_def.options.begin(), cli_transform_config_def.options.end());
|
|
this->options.insert(cli_misc_config_def.options.begin(), cli_misc_config_def.options.end());
|
|
for (const auto &kvp : this->options)
|
|
this->by_serialization_key_ordinal[kvp.second.serialization_key_ordinal] = &kvp.second;
|
|
}
|
|
// Do not release the default values, they are handled by print_config_def & cli_actions_config_def / cli_transform_config_def / cli_misc_config_def.
|
|
~PrintAndCLIConfigDef() { this->options.clear(); }
|
|
};
|
|
static PrintAndCLIConfigDef s_def;
|
|
};
|
|
|
|
} // namespace Slic3r
|
|
|
|
// Serialization through the Cereal library
|
|
namespace cereal {
|
|
// Let cereal know that there are load / save non-member functions declared for DynamicPrintConfig, ignore serialize / load / save from parent class DynamicConfig.
|
|
template <class Archive> struct specialize<Archive, Slic3r::DynamicPrintConfig, cereal::specialization::non_member_load_save> {};
|
|
|
|
template<class Archive> void load(Archive& archive, Slic3r::DynamicPrintConfig &config)
|
|
{
|
|
size_t cnt;
|
|
archive(cnt);
|
|
config.clear();
|
|
for (size_t i = 0; i < cnt; ++ i) {
|
|
size_t serialization_key_ordinal;
|
|
archive(serialization_key_ordinal);
|
|
assert(serialization_key_ordinal > 0);
|
|
auto it = Slic3r::print_config_def.by_serialization_key_ordinal.find(serialization_key_ordinal);
|
|
assert(it != Slic3r::print_config_def.by_serialization_key_ordinal.end());
|
|
config.set_key_value(it->second->opt_key, it->second->load_option_from_archive(archive));
|
|
}
|
|
}
|
|
|
|
template<class Archive> void save(Archive& archive, const Slic3r::DynamicPrintConfig &config)
|
|
{
|
|
size_t cnt = config.size();
|
|
archive(cnt);
|
|
for (auto it = config.cbegin(); it != config.cend(); ++it) {
|
|
const Slic3r::ConfigOptionDef* optdef = Slic3r::print_config_def.get(it->first);
|
|
assert(optdef != nullptr);
|
|
assert(optdef->serialization_key_ordinal > 0);
|
|
archive(optdef->serialization_key_ordinal);
|
|
optdef->save_option_to_archive(archive, it->second.get());
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif
|