1477 lines
56 KiB
Perl
1477 lines
56 KiB
Perl
package Slic3r::GUI::Tab;
|
|
use strict;
|
|
use warnings;
|
|
use utf8;
|
|
|
|
use File::Basename qw(basename);
|
|
use List::Util qw(first);
|
|
use Wx qw(:bookctrl :dialog :keycode :icon :id :misc :panel :sizer :treectrl :window
|
|
:button wxTheApp);
|
|
use Wx::Event qw(EVT_BUTTON EVT_CHOICE EVT_KEY_DOWN EVT_TREE_SEL_CHANGED);
|
|
use base qw(Wx::Panel Class::Accessor);
|
|
|
|
__PACKAGE__->mk_accessors(qw(current_preset));
|
|
|
|
sub new {
|
|
my $class = shift;
|
|
my ($parent, %params) = @_;
|
|
my $self = $class->SUPER::new($parent, -1, wxDefaultPosition, wxDefaultSize, wxBK_LEFT | wxTAB_TRAVERSAL);
|
|
|
|
# horizontal sizer
|
|
$self->{sizer} = Wx::BoxSizer->new(wxHORIZONTAL);
|
|
$self->{sizer}->SetSizeHints($self);
|
|
$self->SetSizer($self->{sizer});
|
|
|
|
# left vertical sizer
|
|
my $left_sizer = Wx::BoxSizer->new(wxVERTICAL);
|
|
$self->{sizer}->Add($left_sizer, 0, wxEXPAND | wxLEFT | wxTOP | wxBOTTOM, 3);
|
|
|
|
my $left_col_width = 150;
|
|
|
|
# preset chooser
|
|
{
|
|
|
|
# choice menu
|
|
$self->{presets_choice} = Wx::Choice->new($self, -1, wxDefaultPosition, [$left_col_width, -1], []);
|
|
$self->{presets_choice}->SetFont($Slic3r::GUI::small_font);
|
|
|
|
# buttons
|
|
$self->{btn_save_preset} = Wx::BitmapButton->new($self, -1, Wx::Bitmap->new("$Slic3r::var/disk.png", wxBITMAP_TYPE_PNG),
|
|
wxDefaultPosition, wxDefaultSize, wxBORDER_NONE);
|
|
$self->{btn_delete_preset} = Wx::BitmapButton->new($self, -1, Wx::Bitmap->new("$Slic3r::var/delete.png", wxBITMAP_TYPE_PNG),
|
|
wxDefaultPosition, wxDefaultSize, wxBORDER_NONE);
|
|
$self->{btn_save_preset}->SetToolTipString("Save current " . lc($self->title));
|
|
$self->{btn_delete_preset}->SetToolTipString("Delete this preset");
|
|
$self->{btn_delete_preset}->Disable;
|
|
|
|
### These cause GTK warnings:
|
|
###my $box = Wx::StaticBox->new($self, -1, "Presets:", wxDefaultPosition, [$left_col_width, 50]);
|
|
###my $hsizer = Wx::StaticBoxSizer->new($box, wxHORIZONTAL);
|
|
|
|
my $hsizer = Wx::BoxSizer->new(wxHORIZONTAL);
|
|
|
|
$left_sizer->Add($hsizer, 0, wxEXPAND | wxBOTTOM, 5);
|
|
$hsizer->Add($self->{presets_choice}, 1, wxRIGHT | wxALIGN_CENTER_VERTICAL, 3);
|
|
$hsizer->Add($self->{btn_save_preset}, 0, wxALIGN_CENTER_VERTICAL);
|
|
$hsizer->Add($self->{btn_delete_preset}, 0, wxALIGN_CENTER_VERTICAL);
|
|
}
|
|
|
|
# tree
|
|
$self->{treectrl} = Wx::TreeCtrl->new($self, -1, wxDefaultPosition, [$left_col_width, -1], wxTR_NO_BUTTONS | wxTR_HIDE_ROOT | wxTR_SINGLE | wxTR_NO_LINES | wxBORDER_SUNKEN | wxWANTS_CHARS);
|
|
$left_sizer->Add($self->{treectrl}, 1, wxEXPAND);
|
|
$self->{icons} = Wx::ImageList->new(16, 16, 1);
|
|
$self->{treectrl}->AssignImageList($self->{icons});
|
|
$self->{iconcount} = -1;
|
|
$self->{treectrl}->AddRoot("root");
|
|
$self->{pages} = [];
|
|
$self->{treectrl}->SetIndent(0);
|
|
$self->{disable_tree_sel_changed_event} = 0;
|
|
EVT_TREE_SEL_CHANGED($parent, $self->{treectrl}, sub {
|
|
return if $self->{disable_tree_sel_changed_event};
|
|
my $page = first { $_->{title} eq $self->{treectrl}->GetItemText($self->{treectrl}->GetSelection) } @{$self->{pages}}
|
|
or return;
|
|
$_->Hide for @{$self->{pages}};
|
|
$page->Show;
|
|
$self->{sizer}->Layout;
|
|
$self->Refresh;
|
|
});
|
|
EVT_KEY_DOWN($self->{treectrl}, sub {
|
|
my ($treectrl, $event) = @_;
|
|
if ($event->GetKeyCode == WXK_TAB) {
|
|
$treectrl->Navigate($event->ShiftDown ? &Wx::wxNavigateBackward : &Wx::wxNavigateForward);
|
|
} else {
|
|
$event->Skip;
|
|
}
|
|
});
|
|
|
|
EVT_CHOICE($parent, $self->{presets_choice}, sub {
|
|
$self->on_select_preset;
|
|
$self->_on_presets_changed;
|
|
});
|
|
|
|
EVT_BUTTON($self, $self->{btn_save_preset}, sub { $self->save_preset });
|
|
|
|
EVT_BUTTON($self, $self->{btn_delete_preset}, sub {
|
|
my $i = $self->current_preset;
|
|
return if $i == 0; # this shouldn't happen but let's trap it anyway
|
|
my $res = Wx::MessageDialog->new($self, "Are you sure you want to delete the selected preset?", 'Delete Preset', wxYES_NO | wxNO_DEFAULT | wxICON_QUESTION)->ShowModal;
|
|
return unless $res == wxID_YES;
|
|
if (-e $self->{presets}[$i]->file) {
|
|
unlink $self->{presets}[$i]->file;
|
|
}
|
|
splice @{$self->{presets}}, $i, 1;
|
|
$self->{presets_choice}->Delete($i);
|
|
$self->current_preset(undef);
|
|
$self->select_preset(0);
|
|
$self->_on_presets_changed;
|
|
});
|
|
|
|
$self->{config} = Slic3r::Config->new;
|
|
$self->build;
|
|
$self->update_tree;
|
|
$self->_update;
|
|
if ($self->hidden_options) {
|
|
$self->{config}->apply(Slic3r::Config->new_from_defaults($self->hidden_options));
|
|
}
|
|
|
|
return $self;
|
|
}
|
|
|
|
sub get_current_preset {
|
|
my $self = shift;
|
|
return $self->get_preset($self->current_preset);
|
|
}
|
|
|
|
sub get_preset {
|
|
my ($self, $i) = @_;
|
|
return $self->{presets}[$i];
|
|
}
|
|
|
|
sub save_preset {
|
|
my ($self, $name) = @_;
|
|
|
|
# since buttons (and choices too) don't get focus on Mac, we set focus manually
|
|
# to the treectrl so that the EVT_* events are fired for the input field having
|
|
# focus currently. is there anything better than this?
|
|
$self->{treectrl}->SetFocus;
|
|
|
|
if (!defined $name) {
|
|
my $preset = $self->get_current_preset;
|
|
my $default_name = $preset->default ? 'Untitled' : $preset->name;
|
|
$default_name =~ s/\.ini$//i;
|
|
|
|
my $dlg = Slic3r::GUI::SavePresetWindow->new($self,
|
|
title => lc($self->title),
|
|
default => $default_name,
|
|
values => [ map $_->name, grep !$_->default && !$_->external, @{$self->{presets}} ],
|
|
);
|
|
return unless $dlg->ShowModal == wxID_OK;
|
|
$name = $dlg->get_name;
|
|
}
|
|
|
|
$self->config->save(sprintf "$Slic3r::GUI::datadir/%s/%s.ini", $self->name, $name);
|
|
$self->load_presets;
|
|
$self->select_preset_by_name($name);
|
|
$self->_on_presets_changed;
|
|
}
|
|
|
|
sub on_value_change {
|
|
my ($self, $cb) = @_;
|
|
$self->{on_value_change} = $cb;
|
|
}
|
|
|
|
sub on_presets_changed {
|
|
my ($self, $cb) = @_;
|
|
$self->{on_presets_changed} = $cb;
|
|
}
|
|
|
|
# This method is supposed to be called whenever new values are loaded
|
|
# or changed by user (so also when a preset is loaded).
|
|
# propagate event to the parent
|
|
sub _on_value_change {
|
|
my $self = shift;
|
|
|
|
$self->{on_value_change}->(@_) if $self->{on_value_change};
|
|
$self->_update;
|
|
}
|
|
|
|
sub _update {}
|
|
|
|
sub _on_presets_changed {
|
|
my $self = shift;
|
|
|
|
$self->{on_presets_changed}->(
|
|
$self->{presets},
|
|
scalar($self->{presets_choice}->GetSelection),
|
|
$self->is_dirty,
|
|
) if $self->{on_presets_changed};
|
|
}
|
|
|
|
sub on_preset_loaded {}
|
|
sub hidden_options {}
|
|
sub config { $_[0]->{config}->clone }
|
|
|
|
sub select_default_preset {
|
|
my $self = shift;
|
|
$self->select_preset(0);
|
|
}
|
|
|
|
sub select_preset {
|
|
my $self = shift;
|
|
$self->{presets_choice}->SetSelection($_[0]);
|
|
$self->on_select_preset;
|
|
}
|
|
|
|
sub select_preset_by_name {
|
|
my ($self, $name) = @_;
|
|
$self->select_preset(first { $self->{presets}[$_]->name eq $name } 0 .. $#{$self->{presets}});
|
|
}
|
|
|
|
sub on_select_preset {
|
|
my $self = shift;
|
|
|
|
if ($self->is_dirty) {
|
|
my $old_preset = $self->get_current_preset;
|
|
my $name = $old_preset->default ? 'Default preset' : "Preset \"" . $old_preset->name . "\"";
|
|
|
|
my @option_names = ();
|
|
foreach my $opt_key (@{$self->dirty_options}) {
|
|
my $opt = $Slic3r::Config::Options->{$opt_key};
|
|
my $name = $opt->{full_label} // $opt->{label};
|
|
if ($opt->{category}) {
|
|
$name = $opt->{category} . " > $name";
|
|
}
|
|
push @option_names, $name;
|
|
}
|
|
|
|
my $changes = join "\n", map "- $_", @option_names;
|
|
my $confirm = Wx::MessageDialog->new($self, "$name has unsaved changes:\n$changes\n\nDiscard changes and continue anyway?",
|
|
'Unsaved Changes', wxYES_NO | wxNO_DEFAULT | wxICON_QUESTION);
|
|
if ($confirm->ShowModal == wxID_NO) {
|
|
$self->{presets_choice}->SetSelection($self->current_preset);
|
|
return;
|
|
}
|
|
}
|
|
|
|
$self->current_preset($self->{presets_choice}->GetSelection);
|
|
my $preset = $self->get_current_preset;
|
|
my $preset_config = $self->get_preset_config($preset);
|
|
eval {
|
|
local $SIG{__WARN__} = Slic3r::GUI::warning_catcher($self);
|
|
foreach my $opt_key (@{$self->{config}->get_keys}) {
|
|
$self->{config}->set($opt_key, $preset_config->get($opt_key))
|
|
if $preset_config->has($opt_key);
|
|
}
|
|
($preset->default || $preset->external)
|
|
? $self->{btn_delete_preset}->Disable
|
|
: $self->{btn_delete_preset}->Enable;
|
|
|
|
$self->_update;
|
|
$self->on_preset_loaded;
|
|
$self->reload_config;
|
|
$Slic3r::GUI::Settings->{presets}{$self->name} = $preset->file ? basename($preset->file) : '';
|
|
};
|
|
if ($@) {
|
|
$@ = "I was unable to load the selected config file: $@";
|
|
Slic3r::GUI::catch_error($self);
|
|
$self->select_default_preset;
|
|
}
|
|
|
|
# use CallAfter because some field triggers schedule on_change calls using CallAfter,
|
|
# and we don't want them to be called after this update_dirty() as they would mark the
|
|
# preset dirty again
|
|
# (not sure this is true anymore now that update_dirty is idempotent)
|
|
wxTheApp->CallAfter(sub {
|
|
$self->_on_presets_changed;
|
|
$self->update_dirty;
|
|
});
|
|
|
|
wxTheApp->save_settings;
|
|
}
|
|
|
|
sub init_config_options {
|
|
my ($self, @opt_keys) = @_;
|
|
$self->{config}->apply(Slic3r::Config->new_from_defaults(@opt_keys));
|
|
}
|
|
|
|
sub add_options_page {
|
|
my $self = shift;
|
|
my ($title, $icon, %params) = @_;
|
|
|
|
if ($icon) {
|
|
my $bitmap = Wx::Bitmap->new("$Slic3r::var/$icon", wxBITMAP_TYPE_PNG);
|
|
$self->{icons}->Add($bitmap);
|
|
$self->{iconcount}++;
|
|
}
|
|
|
|
my $page = Slic3r::GUI::Tab::Page->new($self, $title, $self->{iconcount});
|
|
$page->Hide;
|
|
$self->{sizer}->Add($page, 1, wxEXPAND | wxLEFT, 5);
|
|
push @{$self->{pages}}, $page;
|
|
return $page;
|
|
}
|
|
|
|
sub reload_config {
|
|
my $self = shift;
|
|
$_->reload_config for @{$self->{pages}};
|
|
}
|
|
|
|
sub update_tree {
|
|
my ($self) = @_;
|
|
|
|
# get label of the currently selected item
|
|
my $selected = $self->{treectrl}->GetItemText($self->{treectrl}->GetSelection);
|
|
|
|
my $rootItem = $self->{treectrl}->GetRootItem;
|
|
$self->{treectrl}->DeleteChildren($rootItem);
|
|
my $have_selection = 0;
|
|
foreach my $page (@{$self->{pages}}) {
|
|
my $itemId = $self->{treectrl}->AppendItem($rootItem, $page->{title}, $page->{iconID});
|
|
if ($page->{title} eq $selected) {
|
|
$self->{disable_tree_sel_changed_event} = 1;
|
|
$self->{treectrl}->SelectItem($itemId);
|
|
$self->{disable_tree_sel_changed_event} = 0;
|
|
$have_selection = 1;
|
|
}
|
|
}
|
|
|
|
if (!$have_selection) {
|
|
# this is triggered on first load, so we don't disable the sel change event
|
|
$self->{treectrl}->SelectItem($self->{treectrl}->GetFirstChild($rootItem));
|
|
}
|
|
}
|
|
|
|
sub update_dirty {
|
|
my $self = shift;
|
|
|
|
foreach my $i (0..$#{$self->{presets}}) {
|
|
my $preset = $self->get_preset($i);
|
|
if ($i == $self->current_preset && $self->is_dirty) {
|
|
$self->{presets_choice}->SetString($i, $preset->name . " (modified)");
|
|
} else {
|
|
$self->{presets_choice}->SetString($i, $preset->name);
|
|
}
|
|
}
|
|
$self->{presets_choice}->SetSelection($self->current_preset); # http://trac.wxwidgets.org/ticket/13769
|
|
$self->_on_presets_changed;
|
|
}
|
|
|
|
sub is_dirty {
|
|
my $self = shift;
|
|
return @{$self->dirty_options} > 0;
|
|
}
|
|
|
|
sub dirty_options {
|
|
my $self = shift;
|
|
|
|
return [] if !defined $self->current_preset; # happens during initialization
|
|
return $self->get_preset_config($self->get_current_preset)->diff($self->{config});
|
|
}
|
|
|
|
sub load_presets {
|
|
my $self = shift;
|
|
|
|
$self->{presets} = [
|
|
Slic3r::GUI::Tab::Preset->new(
|
|
default => 1,
|
|
name => '- default -',
|
|
),
|
|
];
|
|
|
|
my %presets = wxTheApp->presets($self->name);
|
|
foreach my $preset_name (sort keys %presets) {
|
|
push @{$self->{presets}}, Slic3r::GUI::Tab::Preset->new(
|
|
name => $preset_name,
|
|
file => $presets{$preset_name},
|
|
);
|
|
}
|
|
|
|
$self->current_preset(undef);
|
|
$self->{presets_choice}->Clear;
|
|
$self->{presets_choice}->Append($_->name) for @{$self->{presets}};
|
|
{
|
|
# load last used preset
|
|
my $i = first { basename($self->{presets}[$_]->file) eq ($Slic3r::GUI::Settings->{presets}{$self->name} || '') } 1 .. $#{$self->{presets}};
|
|
$self->select_preset($i || 0);
|
|
}
|
|
$self->_on_presets_changed;
|
|
}
|
|
|
|
sub load_config_file {
|
|
my $self = shift;
|
|
my ($file) = @_;
|
|
|
|
# look for the loaded config among the existing menu items
|
|
my $i = first { $self->{presets}[$_]{file} eq $file && $self->{presets}[$_]{external} } 1..$#{$self->{presets}};
|
|
if (!$i) {
|
|
my $preset_name = basename($file); # keep the .ini suffix
|
|
push @{$self->{presets}}, Slic3r::GUI::Tab::Preset->new(
|
|
file => $file,
|
|
name => $preset_name,
|
|
external => 1,
|
|
);
|
|
$self->{presets_choice}->Append($preset_name);
|
|
$i = $#{$self->{presets}};
|
|
}
|
|
$self->{presets_choice}->SetSelection($i);
|
|
$self->on_select_preset;
|
|
$self->_on_presets_changed;
|
|
}
|
|
|
|
sub load_config {
|
|
my $self = shift;
|
|
my ($config) = @_;
|
|
|
|
foreach my $opt_key (@{$self->{config}->diff($config)}) {
|
|
$self->{config}->set($opt_key, $config->get($opt_key));
|
|
$self->update_dirty;
|
|
}
|
|
$self->reload_config;
|
|
$self->_update;
|
|
}
|
|
|
|
sub get_preset_config {
|
|
my ($self, $preset) = @_;
|
|
return $preset->config($self->{config}->get_keys);
|
|
}
|
|
|
|
sub get_field {
|
|
my ($self, $opt_key, $opt_index) = @_;
|
|
|
|
foreach my $page (@{ $self->{pages} }) {
|
|
my $field = $page->get_field($opt_key, $opt_index);
|
|
return $field if defined $field;
|
|
}
|
|
return undef;
|
|
}
|
|
|
|
sub set_value {
|
|
my $self = shift;
|
|
my ($opt_key, $value) = @_;
|
|
|
|
my $changed = 0;
|
|
foreach my $page (@{ $self->{pages} }) {
|
|
$changed = 1 if $page->set_value($opt_key, $value);
|
|
}
|
|
return $changed;
|
|
}
|
|
|
|
package Slic3r::GUI::Tab::Print;
|
|
use base 'Slic3r::GUI::Tab';
|
|
|
|
use List::Util qw(first);
|
|
use Wx qw(:icon :dialog :id);
|
|
|
|
sub name { 'print' }
|
|
sub title { 'Print Settings' }
|
|
|
|
sub build {
|
|
my $self = shift;
|
|
|
|
$self->init_config_options(qw(
|
|
layer_height first_layer_height
|
|
perimeters spiral_vase
|
|
top_solid_layers bottom_solid_layers
|
|
extra_perimeters avoid_crossing_perimeters thin_walls overhangs
|
|
seam_position external_perimeters_first
|
|
fill_density fill_pattern external_fill_pattern
|
|
infill_every_layers infill_only_where_needed
|
|
solid_infill_every_layers fill_angle solid_infill_below_area
|
|
only_retract_when_crossing_perimeters infill_first
|
|
max_print_speed max_volumetric_speed
|
|
perimeter_speed small_perimeter_speed external_perimeter_speed infill_speed
|
|
solid_infill_speed top_solid_infill_speed support_material_speed
|
|
support_material_interface_speed bridge_speed gap_fill_speed
|
|
travel_speed
|
|
first_layer_speed
|
|
perimeter_acceleration infill_acceleration bridge_acceleration
|
|
first_layer_acceleration default_acceleration
|
|
skirts skirt_distance skirt_height min_skirt_length
|
|
brim_width
|
|
support_material support_material_threshold support_material_enforce_layers
|
|
raft_layers
|
|
support_material_pattern support_material_spacing support_material_angle
|
|
support_material_interface_layers support_material_interface_spacing
|
|
support_material_contact_distance dont_support_bridges
|
|
notes
|
|
complete_objects extruder_clearance_radius extruder_clearance_height
|
|
gcode_comments output_filename_format
|
|
post_process
|
|
perimeter_extruder infill_extruder solid_infill_extruder
|
|
support_material_extruder support_material_interface_extruder
|
|
ooze_prevention standby_temperature_delta
|
|
interface_shells
|
|
extrusion_width first_layer_extrusion_width perimeter_extrusion_width
|
|
external_perimeter_extrusion_width infill_extrusion_width solid_infill_extrusion_width
|
|
top_infill_extrusion_width support_material_extrusion_width
|
|
infill_overlap bridge_flow_ratio
|
|
xy_size_compensation threads resolution
|
|
));
|
|
|
|
{
|
|
my $page = $self->add_options_page('Layers and perimeters', 'layers.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Layer height');
|
|
$optgroup->append_single_option_line('layer_height');
|
|
$optgroup->append_single_option_line('first_layer_height');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Vertical shells');
|
|
$optgroup->append_single_option_line('perimeters');
|
|
$optgroup->append_single_option_line('spiral_vase');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Horizontal shells');
|
|
my $line = Slic3r::GUI::OptionsGroup::Line->new(
|
|
label => 'Solid layers',
|
|
);
|
|
$line->append_option($optgroup->get_option('top_solid_layers'));
|
|
$line->append_option($optgroup->get_option('bottom_solid_layers'));
|
|
$optgroup->append_line($line);
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Quality (slower slicing)');
|
|
$optgroup->append_single_option_line('extra_perimeters');
|
|
$optgroup->append_single_option_line('avoid_crossing_perimeters');
|
|
$optgroup->append_single_option_line('thin_walls');
|
|
$optgroup->append_single_option_line('overhangs');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Advanced');
|
|
$optgroup->append_single_option_line('seam_position');
|
|
$optgroup->append_single_option_line('external_perimeters_first');
|
|
}
|
|
}
|
|
|
|
{
|
|
my $page = $self->add_options_page('Infill', 'shading.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Infill');
|
|
$optgroup->append_single_option_line('fill_density');
|
|
$optgroup->append_single_option_line('fill_pattern');
|
|
$optgroup->append_single_option_line('external_fill_pattern');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Reducing printing time');
|
|
$optgroup->append_single_option_line('infill_every_layers');
|
|
$optgroup->append_single_option_line('infill_only_where_needed');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Advanced');
|
|
$optgroup->append_single_option_line('solid_infill_every_layers');
|
|
$optgroup->append_single_option_line('fill_angle');
|
|
$optgroup->append_single_option_line('solid_infill_below_area');
|
|
$optgroup->append_single_option_line('only_retract_when_crossing_perimeters');
|
|
$optgroup->append_single_option_line('infill_first');
|
|
}
|
|
}
|
|
|
|
{
|
|
my $page = $self->add_options_page('Skirt and brim', 'box.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Skirt');
|
|
$optgroup->append_single_option_line('skirts');
|
|
$optgroup->append_single_option_line('skirt_distance');
|
|
$optgroup->append_single_option_line('skirt_height');
|
|
$optgroup->append_single_option_line('min_skirt_length');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Brim');
|
|
$optgroup->append_single_option_line('brim_width');
|
|
}
|
|
}
|
|
|
|
{
|
|
my $page = $self->add_options_page('Support material', 'building.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Support material');
|
|
$optgroup->append_single_option_line('support_material');
|
|
$optgroup->append_single_option_line('support_material_threshold');
|
|
$optgroup->append_single_option_line('support_material_enforce_layers');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Raft');
|
|
$optgroup->append_single_option_line('raft_layers');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Options for support material and raft');
|
|
$optgroup->append_single_option_line('support_material_contact_distance');
|
|
$optgroup->append_single_option_line('support_material_pattern');
|
|
$optgroup->append_single_option_line('support_material_spacing');
|
|
$optgroup->append_single_option_line('support_material_angle');
|
|
$optgroup->append_single_option_line('support_material_interface_layers');
|
|
$optgroup->append_single_option_line('support_material_interface_spacing');
|
|
$optgroup->append_single_option_line('dont_support_bridges');
|
|
}
|
|
}
|
|
|
|
{
|
|
my $page = $self->add_options_page('Speed', 'time.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Speed for print moves');
|
|
$optgroup->append_single_option_line('perimeter_speed');
|
|
$optgroup->append_single_option_line('small_perimeter_speed');
|
|
$optgroup->append_single_option_line('external_perimeter_speed');
|
|
$optgroup->append_single_option_line('infill_speed');
|
|
$optgroup->append_single_option_line('solid_infill_speed');
|
|
$optgroup->append_single_option_line('top_solid_infill_speed');
|
|
$optgroup->append_single_option_line('support_material_speed');
|
|
$optgroup->append_single_option_line('support_material_interface_speed');
|
|
$optgroup->append_single_option_line('bridge_speed');
|
|
$optgroup->append_single_option_line('gap_fill_speed');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Speed for non-print moves');
|
|
$optgroup->append_single_option_line('travel_speed');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Modifiers');
|
|
$optgroup->append_single_option_line('first_layer_speed');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Acceleration control (advanced)');
|
|
$optgroup->append_single_option_line('perimeter_acceleration');
|
|
$optgroup->append_single_option_line('infill_acceleration');
|
|
$optgroup->append_single_option_line('bridge_acceleration');
|
|
$optgroup->append_single_option_line('first_layer_acceleration');
|
|
$optgroup->append_single_option_line('default_acceleration');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Autospeed (advanced)');
|
|
$optgroup->append_single_option_line('max_print_speed');
|
|
$optgroup->append_single_option_line('max_volumetric_speed');
|
|
}
|
|
}
|
|
|
|
{
|
|
my $page = $self->add_options_page('Multiple Extruders', 'funnel.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Extruders');
|
|
$optgroup->append_single_option_line('perimeter_extruder');
|
|
$optgroup->append_single_option_line('infill_extruder');
|
|
$optgroup->append_single_option_line('solid_infill_extruder');
|
|
$optgroup->append_single_option_line('support_material_extruder');
|
|
$optgroup->append_single_option_line('support_material_interface_extruder');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Ooze prevention');
|
|
$optgroup->append_single_option_line('ooze_prevention');
|
|
$optgroup->append_single_option_line('standby_temperature_delta');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Advanced');
|
|
$optgroup->append_single_option_line('interface_shells');
|
|
}
|
|
}
|
|
|
|
{
|
|
my $page = $self->add_options_page('Advanced', 'wrench.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Extrusion width',
|
|
label_width => 180,
|
|
);
|
|
$optgroup->append_single_option_line('extrusion_width');
|
|
$optgroup->append_single_option_line('first_layer_extrusion_width');
|
|
$optgroup->append_single_option_line('perimeter_extrusion_width');
|
|
$optgroup->append_single_option_line('external_perimeter_extrusion_width');
|
|
$optgroup->append_single_option_line('infill_extrusion_width');
|
|
$optgroup->append_single_option_line('solid_infill_extrusion_width');
|
|
$optgroup->append_single_option_line('top_infill_extrusion_width');
|
|
$optgroup->append_single_option_line('support_material_extrusion_width');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Overlap');
|
|
$optgroup->append_single_option_line('infill_overlap');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Flow');
|
|
$optgroup->append_single_option_line('bridge_flow_ratio');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Other');
|
|
$optgroup->append_single_option_line('xy_size_compensation');
|
|
$optgroup->append_single_option_line('threads') if $Slic3r::have_threads;
|
|
$optgroup->append_single_option_line('resolution');
|
|
}
|
|
}
|
|
|
|
{
|
|
my $page = $self->add_options_page('Output options', 'page_white_go.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Sequential printing');
|
|
$optgroup->append_single_option_line('complete_objects');
|
|
my $line = Slic3r::GUI::OptionsGroup::Line->new(
|
|
label => 'Extruder clearance (mm)',
|
|
);
|
|
foreach my $opt_key (qw(extruder_clearance_radius extruder_clearance_height)) {
|
|
my $option = $optgroup->get_option($opt_key);
|
|
$option->width(60);
|
|
$line->append_option($option);
|
|
}
|
|
$optgroup->append_line($line);
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Output file');
|
|
$optgroup->append_single_option_line('gcode_comments');
|
|
|
|
{
|
|
my $option = $optgroup->get_option('output_filename_format');
|
|
$option->full_width(1);
|
|
$optgroup->append_single_option_line($option);
|
|
}
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Post-processing scripts',
|
|
label_width => 0,
|
|
);
|
|
my $option = $optgroup->get_option('post_process');
|
|
$option->full_width(1);
|
|
$option->height(50);
|
|
$optgroup->append_single_option_line($option);
|
|
}
|
|
}
|
|
|
|
{
|
|
my $page = $self->add_options_page('Notes', 'note.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Notes',
|
|
label_width => 0,
|
|
);
|
|
my $option = $optgroup->get_option('notes');
|
|
$option->full_width(1);
|
|
$option->height(250);
|
|
$optgroup->append_single_option_line($option);
|
|
}
|
|
}
|
|
}
|
|
|
|
sub _update {
|
|
my ($self) = @_;
|
|
|
|
my $config = $self->{config};
|
|
|
|
if ($config->spiral_vase && !($config->perimeters == 1 && $config->top_solid_layers == 0 && $config->fill_density == 0)) {
|
|
my $dialog = Wx::MessageDialog->new($self,
|
|
"The Spiral Vase mode requires:\n"
|
|
. "- one perimeter\n"
|
|
. "- no top solid layers\n"
|
|
. "- 0% fill density\n"
|
|
. "- no support material\n"
|
|
. "\nShall I adjust those settings in order to enable Spiral Vase?",
|
|
'Spiral Vase', wxICON_WARNING | wxYES | wxNO);
|
|
if ($dialog->ShowModal() == wxID_YES) {
|
|
my $new_conf = Slic3r::Config->new;
|
|
$new_conf->set("perimeters", 1);
|
|
$new_conf->set("top_solid_layers", 0);
|
|
$new_conf->set("fill_density", 0);
|
|
$new_conf->set("support_material", 0);
|
|
$self->load_config($new_conf);
|
|
} else {
|
|
my $new_conf = Slic3r::Config->new;
|
|
$new_conf->set("spiral_vase", 0);
|
|
$self->load_config($new_conf);
|
|
}
|
|
}
|
|
|
|
if ($config->fill_density == 100
|
|
&& !first { $_ eq $config->fill_pattern } @{$Slic3r::Config::Options->{external_fill_pattern}{values}}) {
|
|
my $dialog = Wx::MessageDialog->new($self,
|
|
"The " . $config->fill_pattern . " infill pattern is not supposed to work at 100% density.\n"
|
|
. "\nShall I switch to rectilinear fill pattern?",
|
|
'Infill', wxICON_WARNING | wxYES | wxNO);
|
|
|
|
my $new_conf = Slic3r::Config->new;
|
|
if ($dialog->ShowModal() == wxID_YES) {
|
|
$new_conf->set("fill_pattern", 1);
|
|
} else {
|
|
$new_conf->set("fill_density", 40);
|
|
}
|
|
$self->load_config($new_conf);
|
|
}
|
|
|
|
my $have_perimeters = $config->perimeters > 0;
|
|
$self->get_field($_)->toggle($have_perimeters)
|
|
for qw(extra_perimeters thin_walls overhangs seam_position external_perimeters_first
|
|
external_perimeter_extrusion_width
|
|
perimeter_speed small_perimeter_speed external_perimeter_speed);
|
|
|
|
my $have_infill = $config->fill_density > 0;
|
|
# infill_extruder uses the same logic as in Print::extruders()
|
|
$self->get_field($_)->toggle($have_infill)
|
|
for qw(fill_pattern infill_every_layers infill_only_where_needed solid_infill_every_layers
|
|
solid_infill_below_area infill_extruder);
|
|
|
|
my $have_solid_infill = ($config->top_solid_layers > 0) || ($config->bottom_solid_layers > 0);
|
|
# solid_infill_extruder uses the same logic as in Print::extruders()
|
|
$self->get_field($_)->toggle($have_solid_infill)
|
|
for qw(external_fill_pattern infill_first solid_infill_extruder solid_infill_extrusion_width
|
|
solid_infill_speed);
|
|
|
|
$self->get_field($_)->toggle($have_infill || $have_solid_infill)
|
|
for qw(fill_angle infill_extrusion_width infill_speed bridge_speed);
|
|
|
|
$self->get_field('gap_fill_speed')->toggle($have_perimeters && $have_infill);
|
|
|
|
my $have_top_solid_infill = $config->top_solid_layers > 0;
|
|
$self->get_field($_)->toggle($have_top_solid_infill)
|
|
for qw(top_infill_extrusion_width top_solid_infill_speed);
|
|
|
|
my $have_default_acceleration = $config->default_acceleration > 0;
|
|
$self->get_field($_)->toggle($have_default_acceleration)
|
|
for qw(perimeter_acceleration infill_acceleration bridge_acceleration first_layer_acceleration);
|
|
|
|
my $have_skirt = $config->skirts > 0 || $config->min_skirt_length > 0;
|
|
$self->get_field($_)->toggle($have_skirt)
|
|
for qw(skirt_distance skirt_height);
|
|
|
|
my $have_brim = $config->brim_width > 0;
|
|
# perimeter_extruder uses the same logic as in Print::extruders()
|
|
$self->get_field('perimeter_extruder')->toggle($have_perimeters || $have_brim);
|
|
|
|
my $have_support_material = $config->support_material || $config->raft_layers > 0;
|
|
my $have_support_interface = $config->support_material_interface_layers > 0;
|
|
$self->get_field($_)->toggle($have_support_material)
|
|
for qw(support_material_threshold support_material_enforce_layers
|
|
support_material_pattern support_material_spacing support_material_angle
|
|
support_material_interface_layers dont_support_bridges
|
|
support_material_extrusion_width support_material_contact_distance);
|
|
$self->get_field($_)->toggle($have_support_material && $have_support_interface)
|
|
for qw(support_material_interface_spacing support_material_interface_extruder
|
|
support_material_interface_speed);
|
|
|
|
$self->get_field('perimeter_extrusion_width')->toggle($have_perimeters || $have_skirt || $have_brim);
|
|
$self->get_field('support_material_extruder')->toggle($have_support_material || $have_skirt);
|
|
$self->get_field('support_material_speed')->toggle($have_support_material || $have_brim || $have_skirt);
|
|
|
|
my $have_sequential_printing = $config->complete_objects;
|
|
$self->get_field($_)->toggle($have_sequential_printing)
|
|
for qw(extruder_clearance_radius extruder_clearance_height);
|
|
|
|
my $have_ooze_prevention = $config->ooze_prevention;
|
|
$self->get_field($_)->toggle($have_ooze_prevention)
|
|
for qw(standby_temperature_delta);
|
|
}
|
|
|
|
sub hidden_options { !$Slic3r::have_threads ? qw(threads) : () }
|
|
|
|
package Slic3r::GUI::Tab::Filament;
|
|
use base 'Slic3r::GUI::Tab';
|
|
|
|
sub name { 'filament' }
|
|
sub title { 'Filament Settings' }
|
|
|
|
sub build {
|
|
my $self = shift;
|
|
|
|
$self->init_config_options(qw(
|
|
filament_colour filament_diameter extrusion_multiplier
|
|
temperature first_layer_temperature bed_temperature first_layer_bed_temperature
|
|
fan_always_on cooling
|
|
min_fan_speed max_fan_speed bridge_fan_speed disable_fan_first_layers
|
|
fan_below_layer_time slowdown_below_layer_time min_print_speed
|
|
));
|
|
|
|
{
|
|
my $page = $self->add_options_page('Filament', 'spool.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Filament');
|
|
$optgroup->append_single_option_line('filament_colour', 0);
|
|
$optgroup->append_single_option_line('filament_diameter', 0);
|
|
$optgroup->append_single_option_line('extrusion_multiplier', 0);
|
|
}
|
|
|
|
{
|
|
my $optgroup = $page->new_optgroup('Temperature (°C)');
|
|
|
|
{
|
|
my $line = Slic3r::GUI::OptionsGroup::Line->new(
|
|
label => 'Extruder',
|
|
);
|
|
$line->append_option($optgroup->get_option('first_layer_temperature', 0));
|
|
$line->append_option($optgroup->get_option('temperature', 0));
|
|
$optgroup->append_line($line);
|
|
}
|
|
|
|
{
|
|
my $line = Slic3r::GUI::OptionsGroup::Line->new(
|
|
label => 'Bed',
|
|
);
|
|
$line->append_option($optgroup->get_option('first_layer_bed_temperature'));
|
|
$line->append_option($optgroup->get_option('bed_temperature'));
|
|
$optgroup->append_line($line);
|
|
}
|
|
}
|
|
}
|
|
|
|
{
|
|
my $page = $self->add_options_page('Cooling', 'hourglass.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Enable');
|
|
$optgroup->append_single_option_line('fan_always_on');
|
|
$optgroup->append_single_option_line('cooling');
|
|
|
|
my $line = Slic3r::GUI::OptionsGroup::Line->new(
|
|
label => '',
|
|
full_width => 1,
|
|
widget => sub {
|
|
my ($parent) = @_;
|
|
return $self->{description_line} = Slic3r::GUI::OptionsGroup::StaticText->new($parent);
|
|
},
|
|
);
|
|
$optgroup->append_line($line);
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Fan settings');
|
|
|
|
{
|
|
my $line = Slic3r::GUI::OptionsGroup::Line->new(
|
|
label => 'Fan speed',
|
|
);
|
|
$line->append_option($optgroup->get_option('min_fan_speed'));
|
|
$line->append_option($optgroup->get_option('max_fan_speed'));
|
|
$optgroup->append_line($line);
|
|
}
|
|
|
|
$optgroup->append_single_option_line('bridge_fan_speed');
|
|
$optgroup->append_single_option_line('disable_fan_first_layers');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Cooling thresholds',
|
|
label_width => 250,
|
|
);
|
|
$optgroup->append_single_option_line('fan_below_layer_time');
|
|
$optgroup->append_single_option_line('slowdown_below_layer_time');
|
|
$optgroup->append_single_option_line('min_print_speed');
|
|
}
|
|
}
|
|
}
|
|
|
|
sub _update {
|
|
my ($self) = @_;
|
|
|
|
$self->_update_description;
|
|
|
|
my $cooling = $self->{config}->cooling;
|
|
$self->get_field($_)->toggle($cooling)
|
|
for qw(max_fan_speed fan_below_layer_time slowdown_below_layer_time min_print_speed);
|
|
$self->get_field($_)->toggle($cooling || $self->{config}->fan_always_on)
|
|
for qw(min_fan_speed disable_fan_first_layers);
|
|
}
|
|
|
|
sub _update_description {
|
|
my $self = shift;
|
|
|
|
my $config = $self->config;
|
|
|
|
my $msg = "";
|
|
my $fan_other_layers = $config->fan_always_on
|
|
? sprintf "will always run at %d%%%s.", $config->min_fan_speed,
|
|
($config->disable_fan_first_layers > 1
|
|
? " except for the first " . $config->disable_fan_first_layers . " layers"
|
|
: $config->disable_fan_first_layers == 1
|
|
? " except for the first layer"
|
|
: "")
|
|
: "will be turned off.";
|
|
|
|
if ($config->cooling) {
|
|
$msg = sprintf "If estimated layer time is below ~%ds, fan will run at %d%% and print speed will be reduced so that no less than %ds are spent on that layer (however, speed will never be reduced below %dmm/s).",
|
|
$config->slowdown_below_layer_time, $config->max_fan_speed, $config->slowdown_below_layer_time, $config->min_print_speed;
|
|
if ($config->fan_below_layer_time > $config->slowdown_below_layer_time) {
|
|
$msg .= sprintf "\nIf estimated layer time is greater, but still below ~%ds, fan will run at a proportionally decreasing speed between %d%% and %d%%.",
|
|
$config->fan_below_layer_time, $config->max_fan_speed, $config->min_fan_speed;
|
|
}
|
|
$msg .= "\nDuring the other layers, fan $fan_other_layers"
|
|
} else {
|
|
$msg = "Fan $fan_other_layers";
|
|
}
|
|
$self->{description_line}->SetText($msg);
|
|
}
|
|
|
|
package Slic3r::GUI::Tab::Printer;
|
|
use base 'Slic3r::GUI::Tab';
|
|
use Wx qw(wxTheApp :sizer :button :bitmap :misc :id);
|
|
use Wx::Event qw(EVT_BUTTON);
|
|
|
|
sub name { 'printer' }
|
|
sub title { 'Printer Settings' }
|
|
|
|
sub build {
|
|
my $self = shift;
|
|
|
|
$self->init_config_options(qw(
|
|
bed_shape z_offset
|
|
gcode_flavor use_relative_e_distances
|
|
octoprint_host octoprint_apikey
|
|
use_firmware_retraction pressure_advance vibration_limit
|
|
use_volumetric_e
|
|
start_gcode end_gcode before_layer_gcode layer_gcode toolchange_gcode
|
|
nozzle_diameter extruder_offset
|
|
retract_length retract_lift retract_speed retract_restart_extra retract_before_travel retract_layer_change wipe
|
|
retract_length_toolchange retract_restart_extra_toolchange
|
|
));
|
|
|
|
my $bed_shape_widget = sub {
|
|
my ($parent) = @_;
|
|
|
|
my $btn = Wx::Button->new($parent, -1, "Set…", wxDefaultPosition, wxDefaultSize, wxBU_LEFT);
|
|
$btn->SetFont($Slic3r::GUI::small_font);
|
|
if ($Slic3r::GUI::have_button_icons) {
|
|
$btn->SetBitmap(Wx::Bitmap->new("$Slic3r::var/cog.png", wxBITMAP_TYPE_PNG));
|
|
}
|
|
|
|
my $sizer = Wx::BoxSizer->new(wxHORIZONTAL);
|
|
$sizer->Add($btn);
|
|
|
|
EVT_BUTTON($self, $btn, sub {
|
|
my $dlg = Slic3r::GUI::BedShapeDialog->new($self, $self->{config}->bed_shape);
|
|
if ($dlg->ShowModal == wxID_OK) {
|
|
my $value = $dlg->GetValue;
|
|
$self->{config}->set('bed_shape', $value);
|
|
$self->update_dirty;
|
|
$self->_on_value_change('bed_shape', $value);
|
|
}
|
|
});
|
|
|
|
return $sizer;
|
|
};
|
|
|
|
$self->{extruders_count} = 1;
|
|
|
|
{
|
|
my $page = $self->add_options_page('General', 'printer_empty.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Size and coordinates');
|
|
|
|
my $line = Slic3r::GUI::OptionsGroup::Line->new(
|
|
label => 'Bed shape',
|
|
widget => $bed_shape_widget,
|
|
);
|
|
$optgroup->append_line($line);
|
|
|
|
$optgroup->append_single_option_line('z_offset');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Capabilities');
|
|
{
|
|
my $option = Slic3r::GUI::OptionsGroup::Option->new(
|
|
opt_id => 'extruders_count',
|
|
type => 'i',
|
|
default => 1,
|
|
label => 'Extruders',
|
|
tooltip => 'Number of extruders of the printer.',
|
|
min => 1,
|
|
);
|
|
$optgroup->append_single_option_line($option);
|
|
}
|
|
$optgroup->on_change(sub {
|
|
my ($opt_id) = @_;
|
|
if ($opt_id eq 'extruders_count') {
|
|
wxTheApp->CallAfter(sub {
|
|
$self->_extruders_count_changed($optgroup->get_value('extruders_count'));
|
|
});
|
|
$self->update_dirty;
|
|
}
|
|
});
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('OctoPrint upload');
|
|
|
|
# append two buttons to the Host line
|
|
my $octoprint_host_browse = sub {
|
|
my ($parent) = @_;
|
|
|
|
my $btn = Wx::Button->new($parent, -1, "Browse…", wxDefaultPosition, wxDefaultSize, wxBU_LEFT);
|
|
$btn->SetFont($Slic3r::GUI::small_font);
|
|
if ($Slic3r::GUI::have_button_icons) {
|
|
$btn->SetBitmap(Wx::Bitmap->new("$Slic3r::var/zoom.png", wxBITMAP_TYPE_PNG));
|
|
}
|
|
|
|
if (!eval "use Net::Bonjour; 1") {
|
|
$btn->Disable;
|
|
}
|
|
|
|
EVT_BUTTON($self, $btn, sub {
|
|
my $dlg = Slic3r::GUI::BonjourBrowser->new($self);
|
|
if ($dlg->ShowModal == wxID_OK) {
|
|
my $value = $dlg->GetValue . ":" . $dlg->GetPort;
|
|
$self->{config}->set('octoprint_host', $value);
|
|
$self->update_dirty;
|
|
$self->_on_value_change('octoprint_host', $value);
|
|
$self->reload_config;
|
|
}
|
|
});
|
|
|
|
return $btn;
|
|
};
|
|
my $octoprint_host_test = sub {
|
|
my ($parent) = @_;
|
|
|
|
my $btn = $self->{octoprint_host_test_btn} = Wx::Button->new($parent, -1, "Test", wxDefaultPosition, wxDefaultSize, wxBU_LEFT);
|
|
$btn->SetFont($Slic3r::GUI::small_font);
|
|
if ($Slic3r::GUI::have_button_icons) {
|
|
$btn->SetBitmap(Wx::Bitmap->new("$Slic3r::var/wrench.png", wxBITMAP_TYPE_PNG));
|
|
}
|
|
|
|
EVT_BUTTON($self, $btn, sub {
|
|
my $ua = LWP::UserAgent->new;
|
|
$ua->timeout(10);
|
|
|
|
my $res = $ua->get(
|
|
"http://" . $self->{config}->octoprint_host . "/api/version",
|
|
'X-Api-Key' => $self->{config}->octoprint_apikey,
|
|
);
|
|
if ($res->is_success) {
|
|
Slic3r::GUI::show_info($self, "Connection to OctoPrint works correctly.", "Success!");
|
|
} else {
|
|
Slic3r::GUI::show_error($self,
|
|
"I wasn't able to connect to OctoPrint (" . $res->status_line . "). "
|
|
. "Check hostname and OctoPrint version (at least 1.1.0 is required).");
|
|
}
|
|
});
|
|
return $btn;
|
|
};
|
|
|
|
my $host_line = $optgroup->create_single_option_line('octoprint_host');
|
|
$host_line->append_widget($octoprint_host_browse);
|
|
$host_line->append_widget($octoprint_host_test);
|
|
$optgroup->append_line($host_line);
|
|
$optgroup->append_single_option_line('octoprint_apikey');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Firmware');
|
|
$optgroup->append_single_option_line('gcode_flavor');
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Advanced');
|
|
$optgroup->append_single_option_line('use_relative_e_distances');
|
|
$optgroup->append_single_option_line('use_firmware_retraction');
|
|
$optgroup->append_single_option_line('use_volumetric_e');
|
|
$optgroup->append_single_option_line('pressure_advance');
|
|
$optgroup->append_single_option_line('vibration_limit');
|
|
}
|
|
}
|
|
{
|
|
my $page = $self->add_options_page('Custom G-code', 'cog.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Start G-code',
|
|
label_width => 0,
|
|
);
|
|
my $option = $optgroup->get_option('start_gcode');
|
|
$option->full_width(1);
|
|
$option->height(150);
|
|
$optgroup->append_single_option_line($option);
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('End G-code',
|
|
label_width => 0,
|
|
);
|
|
my $option = $optgroup->get_option('end_gcode');
|
|
$option->full_width(1);
|
|
$option->height(150);
|
|
$optgroup->append_single_option_line($option);
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Before layer change G-code',
|
|
label_width => 0,
|
|
);
|
|
my $option = $optgroup->get_option('before_layer_gcode');
|
|
$option->full_width(1);
|
|
$option->height(150);
|
|
$optgroup->append_single_option_line($option);
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('After layer change G-code',
|
|
label_width => 0,
|
|
);
|
|
my $option = $optgroup->get_option('layer_gcode');
|
|
$option->full_width(1);
|
|
$option->height(150);
|
|
$optgroup->append_single_option_line($option);
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Tool change G-code',
|
|
label_width => 0,
|
|
);
|
|
my $option = $optgroup->get_option('toolchange_gcode');
|
|
$option->full_width(1);
|
|
$option->height(150);
|
|
$optgroup->append_single_option_line($option);
|
|
}
|
|
}
|
|
|
|
$self->{extruder_pages} = [];
|
|
$self->_build_extruder_pages;
|
|
}
|
|
|
|
sub _extruders_count_changed {
|
|
my ($self, $extruders_count) = @_;
|
|
|
|
$self->{extruders_count} = $extruders_count;
|
|
$self->_build_extruder_pages;
|
|
$self->_on_value_change('extruders_count', $extruders_count);
|
|
$self->_update;
|
|
}
|
|
|
|
sub _extruder_options { qw(nozzle_diameter extruder_offset retract_length retract_lift retract_speed retract_restart_extra retract_before_travel wipe
|
|
retract_layer_change retract_length_toolchange retract_restart_extra_toolchange) }
|
|
|
|
sub _build_extruder_pages {
|
|
my $self = shift;
|
|
|
|
my $default_config = Slic3r::Config::Full->new;
|
|
|
|
foreach my $extruder_idx (@{$self->{extruder_pages}} .. $self->{extruders_count}-1) {
|
|
# extend options
|
|
foreach my $opt_key ($self->_extruder_options) {
|
|
my $values = $self->{config}->get($opt_key);
|
|
if (!defined $values) {
|
|
$values = [ $default_config->get_at($opt_key, 0) ];
|
|
} else {
|
|
# use last extruder's settings for the new one
|
|
my $last_value = $values->[-1];
|
|
$values->[$extruder_idx] //= $last_value;
|
|
}
|
|
$self->{config}->set($opt_key, $values)
|
|
or die "Unable to extend $opt_key";
|
|
}
|
|
|
|
# build page
|
|
my $page = $self->{extruder_pages}[$extruder_idx] = $self->add_options_page("Extruder " . ($extruder_idx + 1), 'funnel.png');
|
|
{
|
|
my $optgroup = $page->new_optgroup('Size');
|
|
$optgroup->append_single_option_line('nozzle_diameter', $extruder_idx);
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Position (for multi-extruder printers)');
|
|
$optgroup->append_single_option_line('extruder_offset', $extruder_idx);
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Retraction');
|
|
$optgroup->append_single_option_line($_, $extruder_idx)
|
|
for qw(retract_length retract_lift retract_speed retract_restart_extra retract_before_travel retract_layer_change wipe);
|
|
}
|
|
{
|
|
my $optgroup = $page->new_optgroup('Retraction when tool is disabled (advanced settings for multi-extruder setups)');
|
|
$optgroup->append_single_option_line($_, $extruder_idx)
|
|
for qw(retract_length_toolchange retract_restart_extra_toolchange);
|
|
}
|
|
}
|
|
|
|
# remove extra pages
|
|
if ($self->{extruders_count} <= $#{$self->{extruder_pages}}) {
|
|
$_->Destroy for @{$self->{extruder_pages}}[$self->{extruders_count}..$#{$self->{extruder_pages}}];
|
|
splice @{$self->{extruder_pages}}, $self->{extruders_count};
|
|
}
|
|
|
|
# remove extra config values
|
|
foreach my $opt_key ($self->_extruder_options) {
|
|
my $values = $self->{config}->get($opt_key);
|
|
splice @$values, $self->{extruders_count} if $self->{extruders_count} <= $#$values;
|
|
$self->{config}->set($opt_key, $values)
|
|
or die "Unable to truncate $opt_key";
|
|
}
|
|
|
|
# rebuild page list
|
|
@{$self->{pages}} = (
|
|
(grep $_->{title} !~ /^Extruder \d+/, @{$self->{pages}}),
|
|
@{$self->{extruder_pages}}[ 0 .. $self->{extruders_count}-1 ],
|
|
);
|
|
$self->update_tree;
|
|
}
|
|
|
|
sub _update {
|
|
my ($self) = @_;
|
|
|
|
my $config = $self->{config};
|
|
|
|
if ($config->get('octoprint_host') && eval "use LWP::UserAgent; 1") {
|
|
$self->{octoprint_host_test_btn}->Enable;
|
|
} else {
|
|
$self->{octoprint_host_test_btn}->Disable;
|
|
}
|
|
$self->get_field('octoprint_apikey')->toggle($config->get('octoprint_host'));
|
|
|
|
my $have_multiple_extruders = $self->{extruders_count} > 1;
|
|
$self->get_field('toolchange_gcode')->toggle($have_multiple_extruders);
|
|
|
|
for my $i (0 .. ($self->{extruders_count}-1)) {
|
|
my $have_retract_length = $config->get_at('retract_length', $i) > 0;
|
|
|
|
# when using firmware retraction, firmware decides retraction length
|
|
$self->get_field('retract_length', $i)->toggle(!$config->use_firmware_retraction);
|
|
|
|
# user can customize travel length if we have retraction length or we're using
|
|
# firmware retraction
|
|
$self->get_field('retract_before_travel', $i)->toggle($have_retract_length || $config->use_firmware_retraction);
|
|
|
|
# user can customize other retraction options if retraction is enabled
|
|
my $retraction = ($have_retract_length || $config->use_firmware_retraction);
|
|
$self->get_field($_, $i)->toggle($retraction)
|
|
for qw(retract_lift retract_layer_change);
|
|
|
|
# some options only apply when not using firmware retraction
|
|
$self->get_field($_, $i)->toggle($retraction && !$config->use_firmware_retraction)
|
|
for qw(retract_speed retract_restart_extra wipe);
|
|
|
|
$self->get_field('retract_length_toolchange', $i)->toggle($have_multiple_extruders);
|
|
|
|
my $toolchange_retraction = $config->get_at('retract_length_toolchange', $i) > 0;
|
|
$self->get_field('retract_restart_extra_toolchange', $i)->toggle
|
|
($have_multiple_extruders && $toolchange_retraction);
|
|
}
|
|
}
|
|
|
|
# this gets executed after preset is loaded and before GUI fields are updated
|
|
sub on_preset_loaded {
|
|
my $self = shift;
|
|
|
|
# update the extruders count field
|
|
{
|
|
# update the GUI field according to the number of nozzle diameters supplied
|
|
my $extruders_count = scalar @{ $self->{config}->nozzle_diameter };
|
|
$self->set_value('extruders_count', $extruders_count);
|
|
$self->_extruders_count_changed($extruders_count);
|
|
}
|
|
}
|
|
|
|
sub load_config_file {
|
|
my $self = shift;
|
|
$self->SUPER::load_config_file(@_);
|
|
|
|
Slic3r::GUI::warning_catcher($self)->(
|
|
"Your configuration was imported. However, Slic3r is currently only able to import settings "
|
|
. "for the first defined filament. We recommend you don't use exported configuration files "
|
|
. "for multi-extruder setups and rely on the built-in preset management system instead.")
|
|
if @{ $self->{config}->nozzle_diameter } > 1;
|
|
}
|
|
|
|
package Slic3r::GUI::Tab::Page;
|
|
use Wx qw(wxTheApp :misc :panel :sizer);
|
|
use base 'Wx::ScrolledWindow';
|
|
|
|
sub new {
|
|
my $class = shift;
|
|
my ($parent, $title, $iconID) = @_;
|
|
my $self = $class->SUPER::new($parent, -1, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
|
|
$self->{optgroups} = [];
|
|
$self->{title} = $title;
|
|
$self->{iconID} = $iconID;
|
|
|
|
$self->SetScrollbars(1, 1, 1, 1);
|
|
|
|
$self->{vsizer} = Wx::BoxSizer->new(wxVERTICAL);
|
|
$self->SetSizer($self->{vsizer});
|
|
|
|
return $self;
|
|
}
|
|
|
|
sub new_optgroup {
|
|
my ($self, $title, %params) = @_;
|
|
|
|
my $optgroup = Slic3r::GUI::ConfigOptionsGroup->new(
|
|
parent => $self,
|
|
title => $title,
|
|
config => $self->GetParent->{config},
|
|
label_width => $params{label_width} // 200,
|
|
on_change => sub {
|
|
my ($opt_key, $value) = @_;
|
|
wxTheApp->CallAfter(sub {
|
|
$self->GetParent->update_dirty;
|
|
$self->GetParent->_on_value_change($opt_key, $value);
|
|
});
|
|
},
|
|
);
|
|
|
|
push @{$self->{optgroups}}, $optgroup;
|
|
$self->{vsizer}->Add($optgroup->sizer, 0, wxEXPAND | wxALL, 10);
|
|
|
|
return $optgroup;
|
|
}
|
|
|
|
sub reload_config {
|
|
my ($self) = @_;
|
|
$_->reload_config for @{$self->{optgroups}};
|
|
}
|
|
|
|
sub get_field {
|
|
my ($self, $opt_key, $opt_index) = @_;
|
|
|
|
foreach my $optgroup (@{ $self->{optgroups} }) {
|
|
my $field = $optgroup->get_fieldc($opt_key, $opt_index);
|
|
return $field if defined $field;
|
|
}
|
|
return undef;
|
|
}
|
|
|
|
sub set_value {
|
|
my $self = shift;
|
|
my ($opt_key, $value) = @_;
|
|
|
|
my $changed = 0;
|
|
foreach my $optgroup (@{$self->{optgroups}}) {
|
|
$changed = 1 if $optgroup->set_value($opt_key, $value);
|
|
}
|
|
return $changed;
|
|
}
|
|
|
|
package Slic3r::GUI::SavePresetWindow;
|
|
use Wx qw(:combobox :dialog :id :misc :sizer);
|
|
use Wx::Event qw(EVT_BUTTON EVT_TEXT_ENTER);
|
|
use base 'Wx::Dialog';
|
|
|
|
sub new {
|
|
my $class = shift;
|
|
my ($parent, %params) = @_;
|
|
my $self = $class->SUPER::new($parent, -1, "Save preset", wxDefaultPosition, wxDefaultSize);
|
|
|
|
my @values = @{$params{values}};
|
|
|
|
my $text = Wx::StaticText->new($self, -1, "Save " . lc($params{title}) . " as:", wxDefaultPosition, wxDefaultSize);
|
|
$self->{combo} = Wx::ComboBox->new($self, -1, $params{default}, wxDefaultPosition, wxDefaultSize, \@values,
|
|
wxTE_PROCESS_ENTER);
|
|
my $buttons = $self->CreateStdDialogButtonSizer(wxOK | wxCANCEL);
|
|
|
|
my $sizer = Wx::BoxSizer->new(wxVERTICAL);
|
|
$sizer->Add($text, 0, wxEXPAND | wxTOP | wxLEFT | wxRIGHT, 10);
|
|
$sizer->Add($self->{combo}, 0, wxEXPAND | wxLEFT | wxRIGHT, 10);
|
|
$sizer->Add($buttons, 0, wxEXPAND | wxBOTTOM | wxLEFT | wxRIGHT, 10);
|
|
|
|
EVT_BUTTON($self, wxID_OK, \&accept);
|
|
EVT_TEXT_ENTER($self, $self->{combo}, \&accept);
|
|
|
|
$self->SetSizer($sizer);
|
|
$sizer->SetSizeHints($self);
|
|
|
|
return $self;
|
|
}
|
|
|
|
sub accept {
|
|
my ($self, $event) = @_;
|
|
|
|
if (($self->{chosen_name} = $self->{combo}->GetValue)) {
|
|
if ($self->{chosen_name} !~ /^[^<>:\/\\|?*\"]+$/i) {
|
|
Slic3r::GUI::show_error($self, "The supplied name is not valid; the following characters are not allowed: <>:/\|?*\"");
|
|
} elsif ($self->{chosen_name} eq '- default -') {
|
|
Slic3r::GUI::show_error($self, "The supplied name is not available.");
|
|
} else {
|
|
$self->EndModal(wxID_OK);
|
|
}
|
|
}
|
|
}
|
|
|
|
sub get_name {
|
|
my $self = shift;
|
|
return $self->{chosen_name};
|
|
}
|
|
|
|
package Slic3r::GUI::Tab::Preset;
|
|
use Moo;
|
|
|
|
has 'default' => (is => 'ro', default => sub { 0 });
|
|
has 'external' => (is => 'ro', default => sub { 0 });
|
|
has 'name' => (is => 'rw', required => 1);
|
|
has 'file' => (is => 'rw');
|
|
|
|
sub config {
|
|
my ($self, $keys) = @_;
|
|
|
|
if ($self->default) {
|
|
return Slic3r::Config->new_from_defaults(@$keys);
|
|
} else {
|
|
if (!-e $self->file) {
|
|
Slic3r::GUI::show_error(undef, "The selected preset does not exist anymore (" . $self->file . ").");
|
|
return undef;
|
|
}
|
|
|
|
# apply preset values on top of defaults
|
|
my $config = Slic3r::Config->new_from_defaults(@$keys);
|
|
my $external_config = Slic3r::Config->load($self->file);
|
|
$config->set($_, $external_config->get($_))
|
|
for grep $external_config->has($_), @$keys;
|
|
|
|
return $config;
|
|
}
|
|
}
|
|
|
|
1;
|