304 lines
9.7 KiB
Perl
304 lines
9.7 KiB
Perl
package Slic3r::Extruder;
|
|
use Moo;
|
|
|
|
use Slic3r::Geometry qw(scale);
|
|
|
|
has 'layer' => (is => 'rw');
|
|
has 'shift_x' => (is => 'ro', default => sub {0} );
|
|
has 'shift_y' => (is => 'ro', default => sub {0} );
|
|
has 'z' => (is => 'rw', default => sub {0} );
|
|
has 'print_feed_rate' => (is => 'rw');
|
|
|
|
has 'extrusion_distance' => (is => 'rw', default => sub {0} );
|
|
has 'retracted' => (is => 'rw', default => sub {1} ); # this spits out some plastic at start
|
|
has 'lifted' => (is => 'rw', default => sub {0} );
|
|
has 'last_pos' => (is => 'rw', default => sub { Slic3r::Point->new(0,0) } );
|
|
has 'last_f' => (is => 'rw', default => sub {0});
|
|
has 'dec' => (is => 'ro', default => sub { 3 } );
|
|
|
|
# calculate speeds
|
|
has 'travel_speed' => (
|
|
is => 'ro',
|
|
default => sub { $Slic3r::travel_speed * 60 }, # mm/min
|
|
);
|
|
has 'perimeter_speed' => (
|
|
is => 'ro',
|
|
default => sub { $Slic3r::perimeter_speed * 60 }, # mm/min
|
|
);
|
|
has 'small_perimeter_speed' => (
|
|
is => 'ro',
|
|
default => sub { $Slic3r::small_perimeter_speed * 60 }, # mm/min
|
|
);
|
|
has 'infill_speed' => (
|
|
is => 'ro',
|
|
default => sub { $Slic3r::infill_speed * 60 }, # mm/min
|
|
);
|
|
has 'solid_infill_speed' => (
|
|
is => 'ro',
|
|
default => sub { $Slic3r::solid_infill_speed * 60 }, # mm/min
|
|
);
|
|
has 'bridge_speed' => (
|
|
is => 'ro',
|
|
default => sub { $Slic3r::bridge_speed * 60 }, # mm/min
|
|
);
|
|
has 'retract_speed' => (
|
|
is => 'ro',
|
|
default => sub { $Slic3r::retract_speed * 60 }, # mm/min
|
|
);
|
|
|
|
use Slic3r::Geometry qw(points_coincide PI X Y);
|
|
use XXX;
|
|
|
|
sub change_layer {
|
|
my $self = shift;
|
|
my ($layer) = @_;
|
|
|
|
$self->layer($layer);
|
|
my $z = $Slic3r::z_offset + $layer->print_z * $Slic3r::resolution;
|
|
|
|
my $gcode = "";
|
|
|
|
$gcode .= $self->retract(move_z => $z);
|
|
$gcode .= $self->G0(undef, $z, 0, 'move to next layer')
|
|
if $self->z != $z;
|
|
|
|
return $gcode;
|
|
}
|
|
|
|
sub extrude_loop {
|
|
my $self = shift;
|
|
my ($loop, $description) = @_;
|
|
|
|
# find the point of the loop that is closest to the current extruder position
|
|
my $start_at = $loop->nearest_point_to($self->last_pos);
|
|
|
|
# split the loop at the starting point and make a path
|
|
my $extrusion_path = $loop->split_at($start_at);
|
|
|
|
# clip the path to avoid the extruder to get exactly on the first point of the loop
|
|
$extrusion_path->clip_end(scale $Slic3r::flow_width);
|
|
|
|
# extrude along the path
|
|
return $self->extrude($extrusion_path, $description);
|
|
}
|
|
|
|
sub extrude {
|
|
my $self = shift;
|
|
my ($path, $description, $recursive) = @_;
|
|
|
|
$path->merge_continuous_lines;
|
|
|
|
# detect arcs
|
|
if ($Slic3r::gcode_arcs && !$recursive) {
|
|
my $gcode = "";
|
|
$gcode .= $self->extrude($_, $description, 1) for $path->detect_arcs;
|
|
return $gcode;
|
|
}
|
|
|
|
my $gcode = "";
|
|
|
|
# retract if distance from previous position is greater or equal to the one
|
|
# specified by the user *and* to the maximum distance between infill lines
|
|
{
|
|
my $distance_from_last_pos = $self->last_pos->distance_to($path->points->[0]) * $Slic3r::resolution;
|
|
my $distance_threshold = $Slic3r::retract_before_travel;
|
|
$distance_threshold = 2 * $Slic3r::flow_width / $Slic3r::fill_density * sqrt(2)
|
|
if $Slic3r::fill_density > 0 && $description =~ /fill/;
|
|
|
|
if ($distance_from_last_pos >= $distance_threshold) {
|
|
$gcode .= $self->retract(travel_to => $path->points->[0]);
|
|
}
|
|
}
|
|
|
|
# go to first point of extrusion path
|
|
$gcode .= $self->G0($path->points->[0], undef, 0, "move to first $description point")
|
|
if !points_coincide($self->last_pos, $path->points->[0]);
|
|
|
|
# compensate retraction
|
|
$gcode .= $self->unretract if $self->retracted;
|
|
|
|
# calculate extrusion length per distance unit
|
|
my $w = $path->flow_width || $Slic3r::flow_width;
|
|
my $h = $path->depth_layers * $Slic3r::layer_height;
|
|
$h = $w if $path->role eq 'bridge';
|
|
|
|
# calculate additional flow for overlapping
|
|
my $overlap_area = $Slic3r::overlap_factor * (($Slic3r::layer_height**2) - ($Slic3r::layer_height**2) / 4 * PI);
|
|
$overlap_area = 0 if $path->role eq 'bridge';
|
|
|
|
my $e = $Slic3r::resolution
|
|
* ($w * $h + ($Slic3r::layer_height**2) / 4 * (PI - 4) + $overlap_area)
|
|
* $Slic3r::extrusion_multiplier
|
|
* (4 / (($Slic3r::filament_diameter ** 2) * PI));
|
|
|
|
# extrude arc or line
|
|
$self->print_feed_rate(
|
|
$path->role =~ /^(perimeter|skirt)$/o ? $self->perimeter_speed
|
|
: $path->role eq 'small-perimeter' ? $self->small_perimeter_speed
|
|
: $path->role eq 'fill' ? $self->infill_speed
|
|
: $path->role eq 'solid-fill' ? $self->solid_infill_speed
|
|
: $path->role eq 'bridge' ? $self->bridge_speed
|
|
: die "Unknown role: " . $path->role
|
|
);
|
|
if ($path->isa('Slic3r::ExtrusionPath::Arc')) {
|
|
$gcode .= $self->G2_G3($path->points->[-1], $path->orientation,
|
|
$path->center, $e * $path->length, $description);
|
|
} else {
|
|
foreach my $line ($path->lines) {
|
|
$gcode .= $self->G1($line->b, undef, $e * $line->length, $description);
|
|
}
|
|
}
|
|
|
|
return $gcode;
|
|
}
|
|
|
|
sub retract {
|
|
my $self = shift;
|
|
my %params = @_;
|
|
|
|
return "" unless $Slic3r::retract_length > 0
|
|
&& !$self->retracted;
|
|
|
|
# prepare moves
|
|
$self->print_feed_rate($self->retract_speed);
|
|
my $retract = [undef, undef, -$Slic3r::retract_length, "retract"];
|
|
my $lift = ($Slic3r::retract_lift == 0 || defined $params{move_z})
|
|
? undef
|
|
: [undef, $self->z + $Slic3r::retract_lift, 0, 'lift plate during retraction'];
|
|
|
|
my $gcode = "";
|
|
if ($Slic3r::g0 && $params{travel_to}) {
|
|
if ($lift) {
|
|
# combine lift and retract
|
|
$lift->[2] = $retract->[2];
|
|
$gcode .= $self->G0(@$lift);
|
|
} else {
|
|
# combine travel and retract
|
|
my $travel = [$params{travel_to}, undef, $retract->[2], 'travel and retract'];
|
|
$gcode .= $self->G0(@$travel);
|
|
}
|
|
} elsif ($Slic3r::g0 && defined $params{move_z}) {
|
|
# combine Z change and retraction
|
|
my $travel = [undef, $params{move_z}, $retract->[2], 'change layer and retract'];
|
|
$gcode .= $self->G0(@$travel);
|
|
} else {
|
|
$gcode .= $self->G1(@$retract);
|
|
if ($lift) {
|
|
$gcode .= $self->G1(@$lift);
|
|
}
|
|
}
|
|
$self->retracted(1);
|
|
$self->lifted(1) if $lift;
|
|
|
|
# reset extrusion distance during retracts
|
|
# this makes sure we leave sufficient precision in the firmware
|
|
if (!$Slic3r::use_relative_e_distances) {
|
|
$gcode .= "G92 " . $Slic3r::extrusion_axis . "0\n";
|
|
$self->extrusion_distance(0);
|
|
}
|
|
|
|
return $gcode;
|
|
}
|
|
|
|
sub unretract {
|
|
my $self = shift;
|
|
$self->retracted(0);
|
|
my $gcode = "";
|
|
|
|
if ($self->lifted) {
|
|
$gcode .= $self->G0(undef, $self->z - $Slic3r::retract_lift, 0, 'restore layer Z');
|
|
$self->lifted(0);
|
|
}
|
|
|
|
$self->print_feed_rate($self->retract_speed);
|
|
$gcode .= $self->G0(undef, undef, ($Slic3r::retract_length + $Slic3r::retract_restart_extra),
|
|
"compensate retraction");
|
|
|
|
return $gcode;
|
|
}
|
|
|
|
sub G0 {
|
|
my $self = shift;
|
|
return $self->G1(@_) if !$Slic3r::g0;
|
|
return "G0" . $self->G0_G1(@_);
|
|
}
|
|
|
|
sub G1 {
|
|
my $self = shift;
|
|
return "G1" . $self->G0_G1(@_);
|
|
}
|
|
|
|
sub G0_G1 {
|
|
my $self = shift;
|
|
my ($point, $z, $e, $comment) = @_;
|
|
my $dec = $self->dec;
|
|
|
|
my $gcode = "";
|
|
|
|
if ($point) {
|
|
$gcode .= sprintf " X%.${dec}f Y%.${dec}f",
|
|
($point->x * $Slic3r::resolution) + $self->shift_x,
|
|
($point->y * $Slic3r::resolution) + $self->shift_y; #**
|
|
$self->last_pos($point);
|
|
}
|
|
if (defined $z && $z != $self->z) {
|
|
$self->z($z);
|
|
$gcode .= sprintf " Z%.${dec}f", $z;
|
|
}
|
|
|
|
return $self->_Gx($gcode, $e, $comment);
|
|
}
|
|
|
|
sub G2_G3 {
|
|
my $self = shift;
|
|
my ($point, $orientation, $center, $e, $comment) = @_;
|
|
my $dec = $self->dec;
|
|
|
|
my $gcode = $orientation eq 'cw' ? "G2" : "G3";
|
|
|
|
$gcode .= sprintf " X%.${dec}f Y%.${dec}f",
|
|
($point->x * $Slic3r::resolution) + $self->shift_x,
|
|
($point->y * $Slic3r::resolution) + $self->shift_y; #**
|
|
|
|
# XY distance of the center from the start position
|
|
$gcode .= sprintf " I%.${dec}f J%.${dec}f",
|
|
($center->[X] - $self->last_pos->[X]) * $Slic3r::resolution,
|
|
($center->[Y] - $self->last_pos->[Y]) * $Slic3r::resolution;
|
|
|
|
$self->last_pos($point);
|
|
return $self->_Gx($gcode, $e, $comment);
|
|
}
|
|
|
|
sub _Gx {
|
|
my $self = shift;
|
|
my ($gcode, $e, $comment) = @_;
|
|
my $dec = $self->dec;
|
|
|
|
# apply the speed reduction for print moves on bottom layer
|
|
my $speed_multiplier = $e && $self->layer->id == 0 && $comment !~ /retract/
|
|
? $Slic3r::bottom_layer_speed_ratio
|
|
: 1;
|
|
|
|
# determine speed
|
|
my $speed = ($e ? $self->print_feed_rate : $self->travel_speed) * $speed_multiplier;
|
|
|
|
# output speed if it's different from last one used
|
|
# (goal: reduce gcode size)
|
|
if ($speed != $self->last_f) {
|
|
$gcode .= sprintf " F%.${dec}f", $speed;
|
|
$self->last_f($speed);
|
|
}
|
|
|
|
# output extrusion distance
|
|
if ($e && $Slic3r::extrusion_axis) {
|
|
$self->extrusion_distance(0) if $Slic3r::use_relative_e_distances;
|
|
$self->extrusion_distance($self->extrusion_distance + $e);
|
|
$gcode .= sprintf " %s%.5f", $Slic3r::extrusion_axis, $self->extrusion_distance;
|
|
}
|
|
|
|
$gcode .= sprintf " ; %s", $comment if $comment && $Slic3r::gcode_comments;
|
|
return "$gcode\n";
|
|
}
|
|
|
|
1;
|