223 lines
8.1 KiB
Perl
223 lines
8.1 KiB
Perl
package Slic3r::Skein;
|
|
use Moo;
|
|
|
|
use Config;
|
|
use File::Basename qw(basename fileparse);
|
|
use Slic3r::Geometry qw(PI unscale);
|
|
use Time::HiRes qw(gettimeofday tv_interval);
|
|
use XXX;
|
|
|
|
# full path (relative or absolute) to the input file
|
|
has 'input_file' => (is => 'ro', required => 1);
|
|
|
|
# full path (relative or absolute) to the output file; it may contain
|
|
# formatting variables like [layer_height] etc.
|
|
has 'output_file' => (is => 'rw', required => 0);
|
|
|
|
has 'status_cb' => (is => 'rw', required => 0, default => sub { sub {} });
|
|
has 'processing_time' => (is => 'rw', required => 0);
|
|
|
|
sub slice_input {
|
|
my $self = shift;
|
|
|
|
my $print;
|
|
if ($self->input_file =~ /\.stl$/i) {
|
|
my $mesh = Slic3r::Format::STL->read_file($self->input_file);
|
|
$mesh->check_manifoldness;
|
|
$print = Slic3r::Print->new_from_mesh($mesh);
|
|
} elsif ( $self->input_file =~ /\.amf(\.xml)?$/i) {
|
|
my ($materials, $meshes_by_material) = Slic3r::Format::AMF->read_file($self->input_file);
|
|
$_->check_manifoldness for values %$meshes_by_material;
|
|
$print = Slic3r::Print->new_from_mesh($meshes_by_material->{_} || +(values %$meshes_by_material)[0]);
|
|
} else {
|
|
die "Input file must have .stl or .amf(.xml) extension\n";
|
|
}
|
|
}
|
|
|
|
sub go {
|
|
my $self = shift;
|
|
my $t0 = [gettimeofday];
|
|
|
|
# skein the STL into layers
|
|
# each layer has surfaces with holes
|
|
$self->status_cb->(5, "Processing input file " . $self->input_file);
|
|
$self->status_cb->(10, "Processing triangulated mesh");
|
|
my $print = $self->slice_input;
|
|
|
|
# make perimeters
|
|
# this will add a set of extrusion loops to each layer
|
|
# as well as generate infill boundaries
|
|
$self->status_cb->(20, "Generating perimeters");
|
|
{
|
|
my $perimeter_maker = Slic3r::Perimeter->new;
|
|
$perimeter_maker->make_perimeter($_) for @{$print->layers};
|
|
}
|
|
|
|
# this will clip $layer->surfaces to the infill boundaries
|
|
# and split them in top/bottom/internal surfaces;
|
|
$self->status_cb->(30, "Detecting solid surfaces");
|
|
$print->detect_surfaces_type;
|
|
|
|
# decide what surfaces are to be filled
|
|
$self->status_cb->(35, "Preparing infill surfaces");
|
|
$_->prepare_fill_surfaces for @{$print->layers};
|
|
|
|
# this will remove unprintable surfaces
|
|
# (those that are too tight for extrusion)
|
|
$self->status_cb->(40, "Cleaning up");
|
|
$_->remove_small_surfaces for @{$print->layers};
|
|
|
|
# this will detect bridges and reverse bridges
|
|
# and rearrange top/bottom/internal surfaces
|
|
$self->status_cb->(45, "Detect bridges");
|
|
$_->process_bridges for @{$print->layers};
|
|
|
|
# this will remove unprintable perimeter loops
|
|
# (those that are too tight for extrusion)
|
|
$self->status_cb->(50, "Cleaning up the perimeters");
|
|
$_->remove_small_perimeters for @{$print->layers};
|
|
|
|
# detect which fill surfaces are near external layers
|
|
# they will be split in internal and internal-solid surfaces
|
|
$self->status_cb->(60, "Generating horizontal shells");
|
|
$print->discover_horizontal_shells;
|
|
|
|
# free memory
|
|
@{$_->surfaces} = () for @{$print->layers};
|
|
|
|
# combine fill surfaces to honor the "infill every N layers" option
|
|
$self->status_cb->(70, "Combining infill");
|
|
$print->infill_every_layers;
|
|
|
|
# this will generate extrusion paths for each layer
|
|
$self->status_cb->(80, "Infilling layers");
|
|
{
|
|
my $fill_maker = Slic3r::Fill->new('print' => $print);
|
|
|
|
Slic3r::parallelize(
|
|
items => [ 0..($print->layer_count-1) ],
|
|
thread_cb => sub {
|
|
my $q = shift;
|
|
$Slic3r::Geometry::Clipper::clipper = Math::Clipper->new;
|
|
my $fills = {};
|
|
while (defined (my $layer_id = $q->dequeue)) {
|
|
$fills->{$layer_id} = [ $fill_maker->make_fill($print->layers->[$layer_id]) ];
|
|
}
|
|
return $fills;
|
|
},
|
|
collect_cb => sub {
|
|
my $fills = shift;
|
|
foreach my $layer_id (keys %$fills) {
|
|
@{$print->layers->[$layer_id]->fills} = @{$fills->{$layer_id}};
|
|
}
|
|
},
|
|
no_threads_cb => sub {
|
|
foreach my $layer (@{$print->layers}) {
|
|
@{$layer->fills} = $fill_maker->make_fill($layer);
|
|
}
|
|
},
|
|
);
|
|
}
|
|
|
|
# generate support material
|
|
if ($Slic3r::support_material) {
|
|
$self->status_cb->(85, "Generating support material");
|
|
$print->generate_support_material;
|
|
}
|
|
|
|
# free memory (note that support material needs fill_surfaces)
|
|
@{$_->fill_surfaces} = () for @{$print->layers};
|
|
|
|
# make skirt
|
|
$self->status_cb->(88, "Generating skirt");
|
|
$print->extrude_skirt;
|
|
|
|
# output everything to a G-code file
|
|
my $output_file = $self->expanded_output_filepath;
|
|
$self->status_cb->(90, "Exporting G-code to $output_file");
|
|
$print->export_gcode($output_file);
|
|
|
|
# run post-processing scripts
|
|
if (@$Slic3r::post_process) {
|
|
$self->status_cb->(95, "Running post-processing scripts");
|
|
for (@$Slic3r::post_process) {
|
|
Slic3r::debugf " '%s' '%s'\n", $_, $output_file;
|
|
system($_, $output_file);
|
|
}
|
|
}
|
|
|
|
# output some statistics
|
|
$self->processing_time(tv_interval($t0));
|
|
printf "Done. Process took %d minutes and %.3f seconds\n",
|
|
int($self->processing_time/60),
|
|
$self->processing_time - int($self->processing_time/60)*60;
|
|
|
|
# TODO: more statistics!
|
|
printf "Filament required: %.1fmm (%.1fcm3)\n",
|
|
$print->total_extrusion_length, $print->total_extrusion_volume;
|
|
}
|
|
|
|
sub export_svg {
|
|
my $self = shift;
|
|
|
|
my $print = $self->slice_input;
|
|
my $output_file = $self->expanded_output_filepath;
|
|
$output_file =~ s/\.gcode$/.svg/i;
|
|
|
|
open my $fh, ">", $output_file or die "Failed to open $output_file for writing\n";
|
|
print "Exporting to $output_file...";
|
|
print $fh sprintf <<"EOF", unscale($print->total_x_length), unscale($print->total_y_length);
|
|
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
|
|
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/REC-SVG-20010904/DTD/svg10.dtd">
|
|
<svg width="%s" height="%s" xmlns="http://www.w3.org/2000/svg" xmlns:svg="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:slic3r="http://slic3r.org/namespaces/slic3r">
|
|
<!--
|
|
Generated using Slic3r $Slic3r::VERSION
|
|
http://slic3r.org/
|
|
-->
|
|
EOF
|
|
|
|
my $print_polygon = sub {
|
|
my ($polygon, $type) = @_;
|
|
printf $fh qq{ <polygon slic3r:type="%s" points="%s" style="fill: %s" />\n},
|
|
$type, (join ' ', map { join ',', map unscale $_, @$_ } @$polygon),
|
|
($type eq 'contour' ? 'black' : 'white');
|
|
};
|
|
|
|
foreach my $layer (@{$print->layers}) {
|
|
printf $fh qq{ <g id="layer%d" slic3r:z="%s">\n}, $layer->id, unscale $layer->slice_z;
|
|
# sort slices so that the outermost ones come first
|
|
my @slices = sort { $a->expolygon->contour->encloses_point($b->expolygon->contour->[0]) ? 0 : 1 } @{$layer->slices};
|
|
foreach my $slice (@slices) {
|
|
$print_polygon->($slice->expolygon->contour, 'contour');
|
|
$print_polygon->($_, 'hole') for $slice->expolygon->holes;
|
|
}
|
|
print $fh qq{ </g>\n};
|
|
}
|
|
|
|
print $fh "</svg>\n";
|
|
close $fh;
|
|
print "Done.\n";
|
|
}
|
|
|
|
# this method will return the value of $self->output_file after expanding its
|
|
# format variables with their values
|
|
sub expanded_output_filepath {
|
|
my $self = shift;
|
|
|
|
my $path = $self->output_file;
|
|
|
|
# if no explicit output file was defined, we take the input
|
|
# file directory and append the specified filename format
|
|
$path ||= (fileparse($self->input_file))[1] . $Slic3r::output_filename_format;
|
|
|
|
my $input_filename = my $input_filename_base = basename($self->input_file);
|
|
$input_filename_base =~ s/\.(?:stl|amf(?:\.xml)?)$//i;
|
|
|
|
return Slic3r::Config->replace_options($path, {
|
|
input_filename => $input_filename,
|
|
input_filename_base => $input_filename_base,
|
|
});
|
|
}
|
|
|
|
1;
|