591 lines
25 KiB
Perl
591 lines
25 KiB
Perl
package Slic3r::Layer::Region;
|
||
use Moo;
|
||
|
||
use List::Util qw(sum first);
|
||
use Slic3r::ExtrusionPath ':roles';
|
||
use Slic3r::Geometry qw(PI A B scale chained_path_items points_coincide);
|
||
use Slic3r::Geometry::Clipper qw(safety_offset union_ex diff_ex intersection_ex
|
||
offset offset2 offset2_ex PFT_EVENODD union_pt traverse_pt diff intersection
|
||
union diff);
|
||
use Slic3r::Surface ':types';
|
||
|
||
has 'layer' => (
|
||
is => 'ro',
|
||
weak_ref => 1,
|
||
required => 1,
|
||
trigger => 1,
|
||
handles => [qw(id slice_z print_z height flow)],
|
||
);
|
||
has 'region' => (is => 'ro', required => 1, handles => [qw(extruders)]);
|
||
has 'perimeter_flow' => (is => 'rw');
|
||
has 'infill_flow' => (is => 'rw');
|
||
has 'solid_infill_flow' => (is => 'rw');
|
||
has 'top_infill_flow' => (is => 'rw');
|
||
has 'infill_area_threshold' => (is => 'lazy');
|
||
has 'overhang_width' => (is => 'lazy');
|
||
|
||
# collection of surfaces generated by slicing the original geometry
|
||
# divided by type top/bottom/internal
|
||
has 'slices' => (is => 'rw', default => sub { [] });
|
||
|
||
# collection of polygons or polylines representing thin walls contained
|
||
# in the original geometry
|
||
has 'thin_walls' => (is => 'rw', default => sub { [] });
|
||
|
||
# collection of polygons or polylines representing thin infill regions that
|
||
# need to be filled with a medial axis
|
||
has 'thin_fills' => (is => 'rw', default => sub { [] });
|
||
|
||
# collection of surfaces for infill generation
|
||
has 'fill_surfaces' => (is => 'rw', default => sub { [] });
|
||
|
||
# ordered collection of extrusion paths/loops to build all perimeters
|
||
has 'perimeters' => (is => 'rw', default => sub { [] });
|
||
|
||
# ordered collection of extrusion paths to fill surfaces
|
||
has 'fills' => (is => 'rw', default => sub { [] });
|
||
|
||
sub BUILD {
|
||
my $self = shift;
|
||
$self->_update_flows;
|
||
}
|
||
|
||
sub _trigger_layer {
|
||
my $self = shift;
|
||
$self->_update_flows;
|
||
}
|
||
|
||
sub _update_flows {
|
||
my $self = shift;
|
||
return if !$self->region;
|
||
|
||
if ($self->id == 0) {
|
||
for (qw(perimeter infill solid_infill top_infill)) {
|
||
my $method = "${_}_flow";
|
||
$self->$method
|
||
($self->region->first_layer_flows->{$_} || $self->region->flows->{$_});
|
||
}
|
||
} else {
|
||
$self->perimeter_flow($self->region->flows->{perimeter});
|
||
$self->infill_flow($self->region->flows->{infill});
|
||
$self->solid_infill_flow($self->region->flows->{solid_infill});
|
||
$self->top_infill_flow($self->region->flows->{top_infill});
|
||
}
|
||
}
|
||
|
||
sub _build_overhang_width {
|
||
my $self = shift;
|
||
my $threshold_rad = PI/2 - atan2($self->perimeter_flow->width / $self->height / 2, 1);
|
||
return scale($self->height * ((cos $threshold_rad) / (sin $threshold_rad)));
|
||
}
|
||
|
||
sub _build_infill_area_threshold {
|
||
my $self = shift;
|
||
return $self->solid_infill_flow->scaled_spacing ** 2;
|
||
}
|
||
|
||
# build polylines from lines
|
||
sub make_surfaces {
|
||
my $self = shift;
|
||
my ($loops) = @_;
|
||
|
||
return if !@$loops;
|
||
$self->slices([ _merge_loops($loops) ]);
|
||
|
||
# detect thin walls by offsetting slices by half extrusion inwards
|
||
if ($Slic3r::Config->thin_walls) {
|
||
$self->thin_walls([]);
|
||
# we use spacing here because there could be a case where
|
||
# the slice collapses with width but doesn't collapse with spacing,
|
||
# thus causing both perimeters and medial axis to be generated
|
||
my $width = $self->perimeter_flow->scaled_spacing;
|
||
my $diff = diff_ex(
|
||
[ map $_->p, @{$self->slices} ],
|
||
[ offset2([ map $_->p, @{$self->slices} ], -$width*0.5, +$width*0.5) ],
|
||
1,
|
||
);
|
||
|
||
my $area_threshold = $width ** 2;
|
||
if (@$diff = grep { $_->area > $area_threshold } @$diff) {
|
||
@{$self->thin_walls} = map $_->medial_axis($width), @$diff;
|
||
Slic3r::debugf " %d thin walls detected\n", scalar(@{$self->thin_walls});
|
||
}
|
||
}
|
||
|
||
if (0) {
|
||
require "Slic3r/SVG.pm";
|
||
Slic3r::SVG::output("surfaces.svg",
|
||
polygons => [ map $_->contour, @{$self->slices} ],
|
||
red_polygons => [ map $_->p, map @{$_->holes}, @{$self->slices} ],
|
||
);
|
||
}
|
||
}
|
||
|
||
sub _merge_loops {
|
||
my ($loops, $safety_offset) = @_;
|
||
|
||
# Input loops are not suitable for evenodd nor nonzero fill types, as we might get
|
||
# two consecutive concentric loops having the same winding order - and we have to
|
||
# respect such order. In that case, evenodd would create wrong inversions, and nonzero
|
||
# would ignore holes inside two concentric contours.
|
||
# So we're ordering loops and collapse consecutive concentric loops having the same
|
||
# winding order.
|
||
# TODO: find a faster algorithm for this.
|
||
my @loops = sort { $a->encloses_point($b->[0]) ? 0 : 1 } @$loops; # outer first
|
||
# we don't perform a safety offset now because it might reverse cw loops
|
||
my $slices = [];
|
||
foreach my $loop (@loops) {
|
||
$slices = $loop->is_counter_clockwise
|
||
? union([ $loop, @$slices ])
|
||
: diff($slices, [$loop]);
|
||
}
|
||
|
||
# perform a safety offset to merge very close facets (TODO: find test case for this)
|
||
$safety_offset //= scale 0.0499;
|
||
$slices = [ offset2_ex($slices, +$safety_offset, -$safety_offset) ];
|
||
|
||
Slic3r::debugf " %d surface(s) having %d holes detected from %d polylines\n",
|
||
scalar(@$slices), scalar(map $_->holes, @$slices), scalar(@$loops) if $Slic3r::debug;
|
||
|
||
return map Slic3r::Surface->new(expolygon => $_, surface_type => S_TYPE_INTERNAL), @$slices;
|
||
}
|
||
|
||
sub make_perimeters {
|
||
my $self = shift;
|
||
|
||
my $perimeter_spacing = $self->perimeter_flow->scaled_spacing;
|
||
my $infill_spacing = $self->solid_infill_flow->scaled_spacing;
|
||
my $gap_area_threshold = $self->perimeter_flow->scaled_width ** 2;
|
||
|
||
$self->perimeters([]);
|
||
$self->fill_surfaces([]);
|
||
$self->thin_fills([]);
|
||
|
||
my @contours = (); # array of Polygons with ccw orientation
|
||
my @holes = (); # array of Polygons with cw orientation
|
||
my @gaps = (); # array of ExPolygons
|
||
|
||
# we need to process each island separately because we might have different
|
||
# extra perimeters for each one
|
||
foreach my $surface (@{$self->slices}) {
|
||
# detect how many perimeters must be generated for this island
|
||
my $loop_number = $Slic3r::Config->perimeters + ($surface->extra_perimeters || 0);
|
||
|
||
# generate loops
|
||
# (one more than necessary so that we can detect gaps even after the desired
|
||
# number of perimeters has been generated)
|
||
my @last = @{$surface->expolygon};
|
||
my @this_gaps = ();
|
||
for my $i (0 .. $loop_number) {
|
||
# external loop only needs half inset distance
|
||
my $spacing = ($i == 0)
|
||
? $perimeter_spacing / 2
|
||
: $perimeter_spacing;
|
||
|
||
my @offsets = offset2_ex(\@last, -1.5*$spacing, +0.5*$spacing);
|
||
my @contours_offsets = map $_->contour, @offsets;
|
||
my @holes_offsets = map $_->holes, @offsets;
|
||
@offsets = (@contours_offsets, @holes_offsets); # turn @offsets from ExPolygons to Polygons
|
||
|
||
# where offset2() collapses the expolygon, then there's no room for an inner loop
|
||
# and we can extract the gap for later processing
|
||
if ($Slic3r::Config->gap_fill_speed > 0 && $Slic3r::Config->fill_density > 0) {
|
||
my $diff = diff_ex(
|
||
[ offset(\@last, -0.5*$spacing) ],
|
||
# +2 on the offset here makes sure that Clipper float truncation
|
||
# won't shrink the clip polygon to be smaller than intended.
|
||
[ offset(\@offsets, +0.5*$spacing + 2) ],
|
||
);
|
||
push @gaps, (@this_gaps = grep $_->area >= $gap_area_threshold, @$diff);
|
||
}
|
||
|
||
last if !@offsets || $i == $loop_number;
|
||
push @contours, @contours_offsets;
|
||
push @holes, @holes_offsets;
|
||
@last = @offsets;
|
||
}
|
||
|
||
# make sure we don't infill narrow parts that are already gap-filled
|
||
# (we only consider this surface's gaps to reduce the diff() complexity)
|
||
@last = @{diff(\@last, [ map @$_, @this_gaps ])};
|
||
|
||
# create one more offset to be used as boundary for fill
|
||
# we offset by half the perimeter spacing (to get to the actual infill boundary)
|
||
# and then we offset back and forth by half the infill spacing to only consider the
|
||
# non-collapsing regions
|
||
push @{ $self->fill_surfaces },
|
||
offset2_ex(
|
||
[ map $_->simplify_as_polygons(&Slic3r::SCALED_RESOLUTION), @{union_ex(\@last)} ],
|
||
-($perimeter_spacing/2 + $infill_spacing/2),
|
||
+$infill_spacing/2,
|
||
);
|
||
}
|
||
|
||
$self->_fill_gaps(\@gaps);
|
||
|
||
# find nesting hierarchies separately for contours and holes
|
||
my $contours_pt = union_pt(\@contours, PFT_EVENODD);
|
||
my $holes_pt = union_pt(\@holes, PFT_EVENODD);
|
||
|
||
# prepare a coderef for traversing the PolyTree object
|
||
# external contours are root items of $contours_pt
|
||
# internal contours are the ones next to external
|
||
my $traverse;
|
||
$traverse = sub {
|
||
my ($polynodes, $depth, $is_contour) = @_;
|
||
|
||
# use a nearest neighbor search to order these children
|
||
# TODO: supply second argument to chained_path_items() too?
|
||
my @nodes = @{Slic3r::Geometry::chained_path_items(
|
||
[ map [ ($_->{outer} ? $_->{outer}[0] : $_->{hole}[0]), $_ ], @$polynodes ],
|
||
)};
|
||
|
||
my @loops = ();
|
||
foreach my $polynode (@nodes) {
|
||
push @loops, $traverse->($polynode->{children}, $depth+1, $is_contour);
|
||
|
||
# return ccw contours and cw holes
|
||
# GCode.pm will convert all of them to ccw, but it needs to know
|
||
# what the holes are in order to compute the correct inwards move
|
||
my $polygon = Slic3r::Polygon->new(defined $polynode->{outer} ? @{$polynode->{outer}} : reverse @{$polynode->{hole}});
|
||
$polygon->reverse if !$is_contour;
|
||
|
||
my $role = EXTR_ROLE_PERIMETER;
|
||
if ($is_contour ? $depth == 0 : !@{ $polynode->{children} }) {
|
||
# external perimeters are root level in case of contours
|
||
# and items with no children in case of holes
|
||
$role = EXTR_ROLE_EXTERNAL_PERIMETER;
|
||
} elsif ($depth == 1 && $is_contour) {
|
||
$role = EXTR_ROLE_CONTOUR_INTERNAL_PERIMETER;
|
||
}
|
||
|
||
push @loops, Slic3r::ExtrusionLoop->pack(
|
||
polygon => $polygon,
|
||
role => $role,
|
||
flow_spacing => $self->perimeter_flow->spacing,
|
||
);
|
||
}
|
||
return @loops;
|
||
};
|
||
|
||
# order loops from inner to outer (in terms of object slices)
|
||
my @loops = (
|
||
(reverse $traverse->($holes_pt, 0)),
|
||
$traverse->($contours_pt, 0, 1),
|
||
);
|
||
|
||
# if brim will be printed, reverse the order of perimeters so that
|
||
# we continue inwards after having finished the brim
|
||
# TODO: add test for perimeter order
|
||
@loops = reverse @loops
|
||
if $Slic3r::Config->external_perimeters_first
|
||
|| ($self->layer->id == 0 && $Slic3r::Config->brim_width > 0);
|
||
|
||
# append perimeters
|
||
push @{ $self->perimeters }, @loops;
|
||
|
||
# add thin walls as perimeters
|
||
push @{ $self->perimeters }, Slic3r::ExtrusionPath::Collection->new(paths => [
|
||
map {
|
||
Slic3r::ExtrusionPath->pack(
|
||
polyline => ($_->isa('Slic3r::Polygon') ? $_->split_at_first_point : $_),
|
||
role => EXTR_ROLE_EXTERNAL_PERIMETER,
|
||
flow_spacing => $self->perimeter_flow->spacing,
|
||
);
|
||
} @{ $self->thin_walls }
|
||
])->chained_path;
|
||
}
|
||
|
||
sub _fill_gaps {
|
||
my $self = shift;
|
||
my ($gaps) = @_;
|
||
|
||
return unless @$gaps;
|
||
|
||
my $filler = $self->layer->object->fill_maker->filler('rectilinear');
|
||
$filler->layer_id($self->layer->id);
|
||
|
||
# we should probably use this code to handle thin walls and remove that logic from
|
||
# make_surfaces(), but we need to enable dynamic extrusion width before as we can't
|
||
# use zigzag for thin walls.
|
||
# in the mean time we subtract thin walls from the detected gaps so that we don't
|
||
# reprocess them, causing overlapping thin walls and zigzag.
|
||
@$gaps = @{diff_ex(
|
||
[ map @$_, @$gaps ],
|
||
[ map $_->grow($self->perimeter_flow->scaled_width), @{$self->{thin_walls}} ],
|
||
1,
|
||
)};
|
||
|
||
# medial axis-based gap fill should benefit from detection of larger gaps too, so
|
||
# we could try with 1.5*$w for example, but that doesn't work well for zigzag fill
|
||
# because it tends to create very sparse points along the gap when the infill direction
|
||
# is not parallel to the gap (1.5*$w thus may only work well with a straight line)
|
||
my $w = $self->perimeter_flow->width;
|
||
my @widths = ($w, 0.4 * $w); # worth trying 0.2 too?
|
||
foreach my $width (@widths) {
|
||
my $flow = $self->perimeter_flow->clone(width => $width);
|
||
|
||
# extract the gaps having this width
|
||
my @this_width = map $_->offset_ex(+0.5*$flow->scaled_width),
|
||
map $_->noncollapsing_offset_ex(-0.5*$flow->scaled_width),
|
||
@$gaps;
|
||
|
||
if (0) { # remember to re-enable t/dynamic.t
|
||
# fill gaps using dynamic extrusion width, by treating them like thin polygons,
|
||
# thus generating the skeleton and using it to fill them
|
||
my %path_args = (
|
||
role => EXTR_ROLE_SOLIDFILL,
|
||
flow_spacing => $flow->spacing,
|
||
);
|
||
push @{ $self->thin_fills }, map {
|
||
$_->isa('Slic3r::Polygon')
|
||
? (map $_->pack, Slic3r::ExtrusionLoop->new(polygon => $_, %path_args)->split_at_first_point) # we should keep these as loops
|
||
: Slic3r::ExtrusionPath->pack(polyline => $_, %path_args),
|
||
} map $_->medial_axis($flow->scaled_width), @this_width;
|
||
|
||
Slic3r::debugf " %d gaps filled with extrusion width = %s\n", scalar @this_width, $width
|
||
if @{ $self->thin_fills };
|
||
|
||
} else {
|
||
# fill gaps using zigzag infill
|
||
|
||
# since this is infill, we have to offset by half-extrusion width inwards
|
||
my @infill = map $_->offset_ex(-0.5*$flow->scaled_width), @this_width;
|
||
|
||
foreach my $expolygon (@infill) {
|
||
my ($params, @paths) = $filler->fill_surface(
|
||
Slic3r::Surface->new(expolygon => $expolygon),
|
||
density => 1,
|
||
flow_spacing => $flow->spacing,
|
||
);
|
||
|
||
push @{ $self->thin_fills },
|
||
map {
|
||
$_->simplify($flow->scaled_width/3);
|
||
$_->pack;
|
||
}
|
||
map Slic3r::ExtrusionPath->new(
|
||
polyline => Slic3r::Polyline->new(@$_),
|
||
role => EXTR_ROLE_GAPFILL,
|
||
height => $self->height,
|
||
flow_spacing => $params->{flow_spacing},
|
||
),
|
||
# Split polylines into lines so that the chained_path() search
|
||
# at the final stage has more freedom and will choose starting
|
||
# points closer than last positions. OTOH, this will make such
|
||
# search slower. Probably, ExtrusionPath objects should support
|
||
# splitting nearby a given position so that we can choose the right
|
||
# entry point even in the middle of the path without needing a
|
||
# complex, slow, chained_path() search on all segments. TODO.
|
||
# Such logic will also avoid all the small travel moves that this
|
||
# line-splitting causes, and it will be applicable to other things
|
||
# too.
|
||
map Slic3r::Polyline->new(@$_)->lines,
|
||
@paths;
|
||
}
|
||
}
|
||
|
||
# check what's left
|
||
@$gaps = @{diff_ex(
|
||
[ map @$_, @$gaps ],
|
||
[ map @$_, @this_width ],
|
||
)};
|
||
}
|
||
}
|
||
|
||
sub prepare_fill_surfaces {
|
||
my $self = shift;
|
||
|
||
# if no solid layers are requested, turn top/bottom surfaces to internal
|
||
if ($Slic3r::Config->top_solid_layers == 0) {
|
||
$_->surface_type(S_TYPE_INTERNAL) for grep $_->surface_type == S_TYPE_TOP, @{$self->fill_surfaces};
|
||
}
|
||
if ($Slic3r::Config->bottom_solid_layers == 0) {
|
||
$_->surface_type(S_TYPE_INTERNAL) for grep $_->surface_type == S_TYPE_BOTTOM, @{$self->fill_surfaces};
|
||
}
|
||
|
||
# turn too small internal regions into solid regions according to the user setting
|
||
if ($Slic3r::Config->fill_density > 0) {
|
||
my $min_area = scale scale $Slic3r::Config->solid_infill_below_area; # scaling an area requires two calls!
|
||
my @small = grep $_->surface_type == S_TYPE_INTERNAL && $_->expolygon->contour->area <= $min_area, @{$self->fill_surfaces};
|
||
$_->surface_type(S_TYPE_INTERNALSOLID) for @small;
|
||
Slic3r::debugf "identified %d small solid surfaces at layer %d\n", scalar(@small), $self->id if @small > 0;
|
||
}
|
||
}
|
||
|
||
sub process_external_surfaces {
|
||
my $self = shift;
|
||
|
||
my $margin = scale &Slic3r::EXTERNAL_INFILL_MARGIN;
|
||
|
||
my @bottom = ();
|
||
foreach my $surface (grep $_->surface_type == S_TYPE_BOTTOM, @{$self->fill_surfaces}) {
|
||
my ($grown) = $surface->expolygon->offset_ex(+$margin);
|
||
|
||
# detect bridge direction before merging grown surfaces otherwise adjacent bridges
|
||
# would get merged into a single one while they need different directions
|
||
# also, supply the original expolygon instead of the grown one, because in case
|
||
# of very thin (but still working) anchors, the grown expolygon would go beyond them
|
||
my $angle = $self->id > 0
|
||
? $self->_detect_bridge_direction($surface->expolygon)
|
||
: undef;
|
||
|
||
push @bottom, $surface->clone(expolygon => $grown, bridge_angle => $angle);
|
||
}
|
||
|
||
my @top = ();
|
||
foreach my $surface (grep $_->surface_type == S_TYPE_TOP, @{$self->fill_surfaces}) {
|
||
# give priority to bottom surfaces
|
||
my $grown = diff_ex(
|
||
[ $surface->expolygon->offset(+$margin) ],
|
||
[ map $_->p, @bottom ],
|
||
);
|
||
push @top, map $surface->clone(expolygon => $_), @$grown;
|
||
}
|
||
|
||
# if we're slicing with no infill, we can't extend external surfaces
|
||
# over non-existent infill
|
||
my @fill_boundaries = $Slic3r::Config->fill_density > 0
|
||
? @{$self->fill_surfaces}
|
||
: grep $_->surface_type != S_TYPE_INTERNAL, @{$self->fill_surfaces};
|
||
|
||
# intersect the grown surfaces with the actual fill boundaries
|
||
my @new_surfaces = ();
|
||
foreach my $group (Slic3r::Surface->group(@top, @bottom)) {
|
||
push @new_surfaces,
|
||
map $group->[0]->clone(expolygon => $_),
|
||
@{intersection_ex(
|
||
[ map $_->p, @$group ],
|
||
[ map $_->p, @fill_boundaries ],
|
||
undef,
|
||
1, # to ensure adjacent expolygons are unified
|
||
)};
|
||
}
|
||
|
||
# subtract the new top surfaces from the other non-top surfaces and re-add them
|
||
my @other = grep $_->surface_type != S_TYPE_TOP && $_->surface_type != S_TYPE_BOTTOM, @{$self->fill_surfaces};
|
||
foreach my $group (Slic3r::Surface->group(@other)) {
|
||
push @new_surfaces, map $group->[0]->clone(expolygon => $_), @{diff_ex(
|
||
[ map $_->p, @$group ],
|
||
[ map $_->p, @new_surfaces ],
|
||
)};
|
||
}
|
||
@{$self->fill_surfaces} = @new_surfaces;
|
||
}
|
||
|
||
sub _detect_bridge_direction {
|
||
my $self = shift;
|
||
my ($expolygon) = @_;
|
||
|
||
my ($grown) = $expolygon->offset_ex(+$self->perimeter_flow->scaled_width);
|
||
my @lower = @{$self->layer->object->layers->[ $self->id - 1 ]->slices}; # expolygons
|
||
|
||
# detect what edges lie on lower slices
|
||
my @edges = (); # polylines
|
||
foreach my $lower (@lower) {
|
||
# turn bridge contour and holes into polylines and then clip them
|
||
# with each lower slice's contour
|
||
my @clipped = map $_->split_at_first_point->clip_with_polygon($lower->contour), @$grown;
|
||
if (@clipped == 2) {
|
||
# If the split_at_first_point() call above happens to split the polygon inside the clipping area
|
||
# we would get two consecutive polylines instead of a single one, so we use this ugly hack to
|
||
# recombine them back into a single one in order to trigger the @edges == 2 logic below.
|
||
# This needs to be replaced with something way better.
|
||
if (points_coincide($clipped[0][0], $clipped[-1][-1])) {
|
||
@clipped = (Slic3r::Polyline->new(@{$clipped[-1]}, @{$clipped[0]}));
|
||
}
|
||
if (points_coincide($clipped[-1][0], $clipped[0][-1])) {
|
||
@clipped = (Slic3r::Polyline->new(@{$clipped[0]}, @{$clipped[1]}));
|
||
}
|
||
}
|
||
push @edges, @clipped;
|
||
}
|
||
|
||
Slic3r::debugf "Found bridge on layer %d with %d support(s)\n", $self->id, scalar(@edges);
|
||
return undef if !@edges;
|
||
|
||
my $bridge_angle = undef;
|
||
|
||
if (0) {
|
||
require "Slic3r/SVG.pm";
|
||
Slic3r::SVG::output("bridge_$expolygon.svg",
|
||
expolygons => [ $expolygon ],
|
||
red_expolygons => [ @lower ],
|
||
polylines => [ @edges ],
|
||
);
|
||
}
|
||
|
||
if (@edges == 2) {
|
||
my @chords = map Slic3r::Line->new($_->[0], $_->[-1]), @edges;
|
||
my @midpoints = map $_->midpoint, @chords;
|
||
my $line_between_midpoints = Slic3r::Line->new(@midpoints);
|
||
$bridge_angle = Slic3r::Geometry::rad2deg_dir($line_between_midpoints->direction);
|
||
} elsif (@edges == 1) {
|
||
# TODO: this case includes both U-shaped bridges and plain overhangs;
|
||
# we need a trapezoidation algorithm to detect the actual bridged area
|
||
# and separate it from the overhang area.
|
||
# in the mean time, we're treating as overhangs all cases where
|
||
# our supporting edge is a straight line
|
||
if (@{$edges[0]} > 2) {
|
||
my $line = Slic3r::Line->new($edges[0]->[0], $edges[0]->[-1]);
|
||
$bridge_angle = Slic3r::Geometry::rad2deg_dir($line->direction);
|
||
}
|
||
} elsif (@edges) {
|
||
# inset the bridge expolygon; we'll use this one to clip our test lines
|
||
my $inset = [ $expolygon->offset_ex($self->infill_flow->scaled_width) ];
|
||
|
||
# detect anchors as intersection between our bridge expolygon and the lower slices
|
||
my $anchors = intersection_ex(
|
||
[ @$grown ],
|
||
[ map @$_, @lower ],
|
||
undef,
|
||
1, # safety offset required to avoid Clipper from detecting empty intersection while Boost actually found some @edges
|
||
);
|
||
|
||
# we'll now try several directions using a rudimentary visibility check:
|
||
# bridge in several directions and then sum the length of lines having both
|
||
# endpoints within anchors
|
||
my %directions = (); # angle => score
|
||
my $angle_increment = PI/36; # 5°
|
||
my $line_increment = $self->infill_flow->scaled_width;
|
||
for (my $angle = 0; $angle <= PI; $angle += $angle_increment) {
|
||
# rotate everything - the center point doesn't matter
|
||
$_->rotate($angle, [0,0]) for @$inset, @$anchors;
|
||
|
||
# generate lines in this direction
|
||
my $bounding_box = Slic3r::Geometry::BoundingBox->new_from_points([ map @$_, map @$_, @$anchors ]);
|
||
|
||
my @lines = ();
|
||
for (my $x = $bounding_box->x_min; $x <= $bounding_box->x_max; $x += $line_increment) {
|
||
push @lines, [ [$x, $bounding_box->y_min], [$x, $bounding_box->y_max] ];
|
||
}
|
||
|
||
# TODO: use a multi_polygon_multi_linestring_intersection() call
|
||
my @clipped_lines = map @{ Boost::Geometry::Utils::polygon_multi_linestring_intersection($_, \@lines) }, @$inset;
|
||
|
||
# remove any line not having both endpoints within anchors
|
||
@clipped_lines = grep {
|
||
my $line = $_;
|
||
!(first { $_->encloses_point_quick($line->[A]) } @$anchors)
|
||
&& !(first { $_->encloses_point_quick($line->[B]) } @$anchors);
|
||
} @clipped_lines;
|
||
|
||
# sum length of bridged lines
|
||
$directions{-$angle} = sum(map Slic3r::Geometry::line_length($_), @clipped_lines) // 0;
|
||
}
|
||
|
||
# this could be slightly optimized with a max search instead of the sort
|
||
my @sorted_directions = sort { $directions{$a} <=> $directions{$b} } keys %directions;
|
||
|
||
# the best direction is the one causing most lines to be bridged
|
||
$bridge_angle = Slic3r::Geometry::rad2deg_dir($sorted_directions[-1]);
|
||
}
|
||
|
||
Slic3r::debugf " Optimal infill angle of bridge on layer %d is %d degrees\n",
|
||
$self->id, $bridge_angle if defined $bridge_angle;
|
||
|
||
return $bridge_angle;
|
||
}
|
||
|
||
1;
|