164 lines
4.3 KiB
Perl
164 lines
4.3 KiB
Perl
package Slic3r;
|
|
|
|
# Copyright holder: Alessandro Ranellucci
|
|
# This application is licensed under the GNU Affero General Public License, version 3
|
|
|
|
use strict;
|
|
use warnings;
|
|
require v5.10;
|
|
|
|
our $VERSION = "0.7.3-dev";
|
|
|
|
our $debug = 0;
|
|
sub debugf {
|
|
printf @_ if $debug;
|
|
}
|
|
|
|
use Config;
|
|
use Slic3r::Config;
|
|
use Slic3r::ExPolygon;
|
|
use Slic3r::Extruder;
|
|
use Slic3r::ExtrusionLoop;
|
|
use Slic3r::ExtrusionPath;
|
|
use Slic3r::ExtrusionPath::Arc;
|
|
use Slic3r::ExtrusionPath::Collection;
|
|
use Slic3r::Fill;
|
|
use Slic3r::Format::AMF;
|
|
use Slic3r::Format::STL;
|
|
use Slic3r::Geometry qw(PI);
|
|
use Slic3r::Layer;
|
|
use Slic3r::Line;
|
|
use Slic3r::Point;
|
|
use Slic3r::Polygon;
|
|
use Slic3r::Polyline;
|
|
use Slic3r::Print;
|
|
use Slic3r::Print::Object;
|
|
use Slic3r::Surface;
|
|
use Slic3r::TriangleMesh;
|
|
|
|
our $have_threads = $Config{useithreads} && eval "use threads; use Thread::Queue; 1";
|
|
our $threads = $have_threads ? 4 : undef;
|
|
|
|
# miscellaneous options
|
|
our $notes = '';
|
|
|
|
# output options
|
|
our $output_filename_format = '[input_filename_base].gcode';
|
|
our $post_process = [];
|
|
|
|
# printer options
|
|
our $nozzle_diameter = 0.5;
|
|
our $print_center = [100,100]; # object will be centered around this point
|
|
our $z_offset = 0;
|
|
our $gcode_flavor = 'reprap';
|
|
our $use_relative_e_distances = 0;
|
|
our $extrusion_axis = 'E';
|
|
our $gcode_arcs = 0;
|
|
our $g0 = 0;
|
|
our $gcode_comments = 0;
|
|
|
|
# filament options
|
|
our $filament_diameter = 3; # mm
|
|
our $extrusion_multiplier = 1;
|
|
our $temperature = 200;
|
|
our $first_layer_temperature;
|
|
our $bed_temperature = 0;
|
|
our $first_layer_bed_temperature;
|
|
|
|
# speed options
|
|
our $travel_speed = 130; # mm/s
|
|
our $perimeter_speed = 30; # mm/s
|
|
our $small_perimeter_speed = 30; # mm/s
|
|
our $infill_speed = 60; # mm/s
|
|
our $solid_infill_speed = 60; # mm/s
|
|
our $bridge_speed = 60; # mm/s
|
|
our $bottom_layer_speed_ratio = 0.3;
|
|
|
|
# acceleration options
|
|
our $acceleration = 0;
|
|
our $perimeter_acceleration = 25; # mm/s^2
|
|
our $infill_acceleration = 50; # mm/s^2
|
|
|
|
# accuracy options
|
|
our $scaling_factor = 0.00000001;
|
|
our $resolution = 0.01;
|
|
our $small_perimeter_area = ((6.5 / $scaling_factor)**2)*PI;
|
|
our $layer_height = 0.4;
|
|
our $first_layer_height_ratio = 1;
|
|
our $infill_every_layers = 1;
|
|
|
|
# flow options
|
|
our $extrusion_width_ratio = 0;
|
|
our $bridge_flow_ratio = 1;
|
|
our $overlap_factor = 0.5;
|
|
our $flow_width;
|
|
our $min_flow_spacing;
|
|
our $flow_spacing;
|
|
|
|
# print options
|
|
our $perimeters = 3;
|
|
our $solid_layers = 3;
|
|
our $fill_pattern = 'rectilinear';
|
|
our $solid_fill_pattern = 'rectilinear';
|
|
our $fill_density = 0.4; # 1 = 100%
|
|
our $fill_angle = 45;
|
|
our $support_material = 0;
|
|
our $support_material_tool = 0;
|
|
our $start_gcode = "G28 ; home all axes";
|
|
our $end_gcode = <<"END";
|
|
M104 S0 ; turn off temperature
|
|
G28 X0 ; home X axis
|
|
M84 ; disable motors
|
|
END
|
|
our $layer_gcode = '';
|
|
|
|
# retraction options
|
|
our $retract_length = 1; # mm
|
|
our $retract_restart_extra = 0; # mm
|
|
our $retract_speed = 30; # mm/s
|
|
our $retract_before_travel = 2; # mm
|
|
our $retract_lift = 0; # mm
|
|
|
|
# cooling options
|
|
our $cooling = 0;
|
|
our $min_fan_speed = 35;
|
|
our $max_fan_speed = 100;
|
|
our $bridge_fan_speed = 100;
|
|
our $fan_below_layer_time = 60;
|
|
our $slowdown_below_layer_time = 15;
|
|
our $min_print_speed = 10;
|
|
our $disable_fan_first_layers = 1;
|
|
our $fan_always_on = 0;
|
|
|
|
# skirt options
|
|
our $skirts = 1;
|
|
our $skirt_distance = 6; # mm
|
|
our $skirt_height = 1; # layers
|
|
|
|
# transform options
|
|
our $scale = 1;
|
|
our $rotate = 0;
|
|
our $duplicate_mode = 'no';
|
|
our $duplicate = 1;
|
|
our $bed_size = [200,200];
|
|
our $duplicate_grid = [1,1];
|
|
our $duplicate_distance = 6; # mm
|
|
|
|
sub parallelize {
|
|
my %params = @_;
|
|
|
|
if (!$params{disable} && $Slic3r::have_threads && $Slic3r::threads > 1) {
|
|
my $q = Thread::Queue->new;
|
|
$q->enqueue(@{ $params{items} }, (map undef, 1..$Slic3r::threads));
|
|
|
|
my $thread_cb = sub { $params{thread_cb}->($q) };
|
|
foreach my $th (map threads->create($thread_cb), 1..$Slic3r::threads) {
|
|
$params{collect_cb}->($th->join);
|
|
}
|
|
} else {
|
|
$params{no_threads_cb}->();
|
|
}
|
|
}
|
|
|
|
1;
|