474 lines
14 KiB
INI
474 lines
14 KiB
INI
# Snapmaker profiles
|
|
|
|
# Based on the profiles from: https://github.com/nivekmai/snapmaker-prusa by nivekmai, WilliamBosacker, mrworf
|
|
|
|
[vendor]
|
|
# Vendor name will be shown by the Config Wizard.
|
|
name = Snapmaker
|
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
|
# This means, the server may force the Slic3r configuration to be downgraded.
|
|
config_version = 1.0.0
|
|
# Where to get the updates from?
|
|
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Snapmaker/
|
|
# The printer models will be shown by the Configuration Wizard in this order,
|
|
|
|
[printer_model:A250]
|
|
name = Snapmaker A250
|
|
variants = 0.4
|
|
technology = FFF
|
|
bed_model = A250_bed.stl
|
|
bed_texture = A250_texture.svg
|
|
default_materials = Generic PLA @Snapmaker; Generic PETG @Snapmaker
|
|
|
|
[printer_model:A350]
|
|
name = Snapmaker A350
|
|
variants = 0.4
|
|
technology = FFF
|
|
bed_model = A350_bed.stl
|
|
bed_texture = A350_texture.svg
|
|
default_materials = Generic PLA @Snapmaker; Generic PETG @Snapmaker
|
|
|
|
[print:*common*]
|
|
avoid_crossing_perimeters = 1
|
|
avoid_crossing_perimeters_max_detour = 0
|
|
bottom_fill_pattern = monotonic
|
|
bottom_solid_layers = 4
|
|
bottom_solid_min_thickness = 0
|
|
bridge_acceleration = 0
|
|
bridge_angle = 0
|
|
bridge_flow_ratio = 1
|
|
bridge_speed = 60
|
|
brim_separation = 0
|
|
brim_type = outer_only
|
|
brim_width = 0
|
|
clip_multipart_objects = 1
|
|
complete_objects = 0
|
|
default_acceleration = 0
|
|
dont_support_bridges = 1
|
|
draft_shield = disabled
|
|
elefant_foot_compensation = 0.1
|
|
ensure_vertical_shell_thickness = 1
|
|
external_perimeter_extrusion_width = 0.45
|
|
external_perimeter_speed = 50%
|
|
external_perimeters_first = 0
|
|
extra_perimeters = 0
|
|
extruder_clearance_height = 25
|
|
extruder_clearance_radius = 75
|
|
extrusion_width = 0.45
|
|
fill_angle = 45
|
|
fill_density = 20%
|
|
fill_pattern = gyroid
|
|
first_layer_acceleration = 0
|
|
first_layer_acceleration_over_raft = 0
|
|
first_layer_extrusion_width = 0.45
|
|
first_layer_height = 0.2
|
|
first_layer_speed = 15
|
|
first_layer_speed_over_raft = 30
|
|
fuzzy_skin = none
|
|
fuzzy_skin_point_dist = 0.8
|
|
fuzzy_skin_thickness = 0.3
|
|
gap_fill_enabled = 1
|
|
gap_fill_speed = 20
|
|
gcode_comments = 0
|
|
gcode_label_objects = 0
|
|
gcode_resolution = 0.0125
|
|
gcode_substitutions =
|
|
infill_acceleration = 0
|
|
infill_anchor = 600%
|
|
infill_anchor_max = 50
|
|
infill_every_layers = 1
|
|
infill_extruder = 1
|
|
infill_extrusion_width = 0.45
|
|
infill_first = 0
|
|
infill_only_where_needed = 0
|
|
infill_overlap = 25%
|
|
infill_speed = 100
|
|
inherits =
|
|
interface_shells = 0
|
|
ironing = 0
|
|
ironing_flowrate = 15%
|
|
ironing_spacing = 0.25
|
|
ironing_speed = 15
|
|
ironing_type = top
|
|
layer_height = 0.2
|
|
max_print_speed = 100
|
|
max_volumetric_speed = 0
|
|
min_skirt_length = 4
|
|
mmu_segmented_region_max_width = 0
|
|
notes =
|
|
only_retract_when_crossing_perimeters = 0
|
|
ooze_prevention = 0
|
|
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
overhangs = 0
|
|
perimeter_acceleration = 0
|
|
perimeter_extruder = 1
|
|
perimeter_extrusion_width = 0.45
|
|
perimeter_speed = 60
|
|
perimeters = 2
|
|
post_process =
|
|
print_settings_id =
|
|
raft_contact_distance = 0.1
|
|
raft_expansion = 1.5
|
|
raft_first_layer_density = 90%
|
|
raft_first_layer_expansion = 3
|
|
raft_layers = 0
|
|
resolution = 0
|
|
seam_position = nearest
|
|
single_extruder_multi_material_priming = 1
|
|
skirt_distance = 5
|
|
skirt_height = 1
|
|
skirts = 3
|
|
slice_closing_radius = 0.049
|
|
slicing_mode = regular
|
|
small_perimeter_speed = 25%
|
|
solid_infill_below_area = 0
|
|
solid_infill_every_layers = 0
|
|
solid_infill_extruder = 1
|
|
solid_infill_extrusion_width = 0.45
|
|
solid_infill_speed = 80%
|
|
spiral_vase = 0
|
|
standby_temperature_delta = -5
|
|
support_material = 0
|
|
support_material_angle = 0
|
|
support_material_auto = 1
|
|
support_material_bottom_contact_distance = 0
|
|
support_material_bottom_interface_layers = -1
|
|
support_material_buildplate_only = 0
|
|
support_material_closing_radius = 2
|
|
support_material_contact_distance = 0.15
|
|
support_material_enforce_layers = 0
|
|
support_material_extruder = 0
|
|
support_material_extrusion_width = 0.38
|
|
support_material_interface_contact_loops = 0
|
|
support_material_interface_extruder = 0
|
|
support_material_interface_layers = 2
|
|
support_material_interface_pattern = rectilinear
|
|
support_material_interface_spacing = 0.2
|
|
support_material_interface_speed = 100%
|
|
support_material_pattern = rectilinear
|
|
support_material_spacing = 2
|
|
support_material_speed = 60
|
|
support_material_style = grid
|
|
support_material_synchronize_layers = 0
|
|
support_material_threshold = 45
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 60%
|
|
thick_bridges = 1
|
|
thin_walls = 0
|
|
threads = 8
|
|
top_fill_pattern = monotonic
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_infill_speed = 60%
|
|
top_solid_layers = 4
|
|
top_solid_min_thickness = 0
|
|
travel_speed = 150
|
|
travel_speed_z = 0
|
|
wipe_tower = 0
|
|
wipe_tower_bridging = 10
|
|
wipe_tower_brim_width = 2
|
|
wipe_tower_no_sparse_layers = 0
|
|
wipe_tower_rotation_angle = 0
|
|
wipe_tower_width = 60
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 140
|
|
xy_size_compensation = 0
|
|
compatible_printers_condition = nozzle_diameter[0]==0.4
|
|
|
|
[print:0.10mm HIGHDETAIL @SnapmakerA350]
|
|
inherits = *common*
|
|
layer_height = 0.1
|
|
bottom_solid_layers = 7
|
|
top_solid_layers = 8
|
|
top_solid_min_thickness = 0.8
|
|
bottom_solid_min_thickness = 0.8
|
|
bridge_speed = 40
|
|
infill_speed = 50
|
|
perimeter_speed = 40
|
|
support_material_speed = 40
|
|
max_print_speed = 50
|
|
skirt_distance = 10
|
|
first_layer_speed = 25%
|
|
compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
|
|
|
|
[print:0.16mm OPTIMAL @SnapmakerA350]
|
|
inherits = *common*
|
|
layer_height = 0.16
|
|
top_solid_layers = 6
|
|
bottom_solid_layers = 6
|
|
first_layer_speed = 25%
|
|
max_print_speed = 60
|
|
compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
|
|
|
|
[print:0.20mm NORMAL @SnapmakerA350]
|
|
inherits = *common*
|
|
compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
|
|
|
|
[print:0.20mm FAST @SnapmakerA350]
|
|
inherits = 0.20mm NORMAL @SnapmakerA350
|
|
bridge_speed = 80
|
|
gap_fill_speed = 30
|
|
infill_speed = 120
|
|
ironing_speed = 20
|
|
perimeter_speed = 80
|
|
support_material_speed = 80
|
|
compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
|
|
|
|
[print:0.08mm DETAIL @SnapmakerA250]
|
|
inherits = 0.20mm NORMAL @SnapmakerA250
|
|
layer_height = 0.08
|
|
infill_speed = 40
|
|
external_perimeter_speed = 10
|
|
perimeter_speed = 15
|
|
top_solid_infill_speed = 20
|
|
travel_speed = 70
|
|
first_layer_extrusion_width = 0.45
|
|
perimeter_extrusion_width = 0.4
|
|
external_perimeter_extrusion_width = 0.4
|
|
infill_extrusion_width = 0.4
|
|
solid_infill_extrusion_width = 0.4
|
|
top_infill_extrusion_width = 0.4
|
|
|
|
[print:0.20mm NORMAL @SnapmakerA250]
|
|
inherits = *common*
|
|
compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A250"
|
|
first_layer_speed = 15
|
|
gap_fill_speed = 15
|
|
infill_speed = 50
|
|
perimeter_speed = 25
|
|
small_perimeter_speed = 20
|
|
external_perimeter_speed = 15
|
|
support_material_speed = 25
|
|
top_solid_infill_speed = 25
|
|
travel_speed = 80
|
|
max_print_speed = 80
|
|
skirt_distance = 3
|
|
min_skirt_length = 25
|
|
|
|
[print:0.24mm FAST @SnapmakerA250]
|
|
inherits = 0.20mm NORMAL @SnapmakerA250
|
|
layer_height = 0.24
|
|
infill_speed = 60
|
|
external_perimeter_speed = 20
|
|
top_solid_infill_speed = 30
|
|
|
|
[filament:*common*]
|
|
bed_temperature = 60
|
|
bridge_fan_speed = 100
|
|
compatible_printers =
|
|
compatible_printers_condition =
|
|
compatible_prints =
|
|
compatible_prints_condition =
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
|
extrusion_multiplier = 1
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 60
|
|
filament_colour = #29B2B2
|
|
filament_cooling_final_speed = 3.4
|
|
filament_cooling_initial_speed = 2.2
|
|
filament_cooling_moves = 4
|
|
filament_cost = 0
|
|
filament_density = 0
|
|
filament_deretract_speed = nil
|
|
filament_diameter = 1.75
|
|
filament_load_time = 0
|
|
filament_loading_speed = 28
|
|
filament_loading_speed_start = 3
|
|
filament_max_volumetric_speed = 0
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_notes = ""
|
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_retract_before_travel = nil
|
|
filament_retract_before_wipe = nil
|
|
filament_retract_layer_change = nil
|
|
filament_retract_length = nil
|
|
filament_retract_lift = nil
|
|
filament_retract_lift_above = nil
|
|
filament_retract_lift_below = nil
|
|
filament_retract_restart_extra = nil
|
|
filament_retract_speed = nil
|
|
filament_settings_id = ""
|
|
filament_soluble = 0
|
|
filament_spool_weight = 0
|
|
filament_toolchange_delay = 0
|
|
filament_type = PLA
|
|
filament_unload_time = 0
|
|
filament_unloading_speed = 90
|
|
filament_unloading_speed_start = 100
|
|
filament_wipe = nil
|
|
first_layer_bed_temperature = 60
|
|
first_layer_temperature = 210
|
|
full_fan_speed_layer = 0
|
|
inherits =
|
|
max_fan_speed = 100
|
|
min_fan_speed = 35
|
|
min_print_speed = 10
|
|
slowdown_below_layer_time = 5
|
|
start_filament_gcode = "; Filament gcode\n"
|
|
temperature = 210
|
|
|
|
[filament:*PLA*]
|
|
inherits = *common*
|
|
|
|
[filament:*PETG*]
|
|
inherits = *common*
|
|
first_layer_bed_temperature = 80
|
|
bed_temperature = 75
|
|
first_layer_temperature = 245
|
|
temperature = 245
|
|
filament_density = 1.27
|
|
disable_fan_first_layers = 3
|
|
min_fan_speed = 20
|
|
max_fan_speed = 50
|
|
fan_below_layer_time = 20
|
|
min_print_speed = 20
|
|
filament_max_volumetric_speed = 8
|
|
filament_type = PETG
|
|
|
|
[filament:Generic PLA @Snapmaker]
|
|
inherits = *PLA*
|
|
filament_vendor = Generic
|
|
|
|
[filament:Generic PETG @Snapmaker]
|
|
inherits = *PETG*
|
|
filament_vendor = Generic
|
|
|
|
[filament:Snapmaker PLA @Snapmaker]
|
|
inherits = *PLA*
|
|
filament_vendor = Snapmaker
|
|
|
|
[filament:Overture PLA @Snapmaker]
|
|
inherits = *PLA*
|
|
filament_vendor = Overture
|
|
bed_temperature = 50
|
|
first_layer_temperature = 205
|
|
temperature = 205
|
|
filament_density = 1.24
|
|
disable_fan_first_layers = 1
|
|
min_fan_speed = 100
|
|
max_fan_speed = 100
|
|
full_fan_speed_layer = 3
|
|
fan_below_layer_time = 100
|
|
min_print_speed = 15
|
|
filament_max_volumetric_speed = 0
|
|
|
|
[filament:MatterHackers Build Translucent @Snapmaker]
|
|
inherits = *PETG*
|
|
filament_vendor = MatterHackers
|
|
|
|
[filament:MatterHackers Build White @Snapmaker]
|
|
inherits = MatterHackers Build Translucent @Snapmaker
|
|
bed_temperature = 65
|
|
first_layer_bed_temperature = 70
|
|
first_layer_temperature = 260
|
|
temperature = 255
|
|
filament_density = 1.28
|
|
disable_fan_first_layers = 3
|
|
full_fan_speed_layer = 5
|
|
min_fan_speed = 40
|
|
max_fan_speed = 100
|
|
fan_below_layer_time = 60
|
|
min_print_speed = 10
|
|
|
|
[filament:Overture TPU @Snapmaker]
|
|
inherits = *common*
|
|
filament_vendor = Overture
|
|
filament_type = FLEX
|
|
first_layer_temperature = 220
|
|
temperature = 220
|
|
filament_density = 1.22
|
|
disable_fan_first_layers = 1
|
|
min_fan_speed = 100
|
|
max_fan_speed = 100
|
|
fan_below_layer_time = 100
|
|
min_print_speed = 15
|
|
filament_retract_speed = 40
|
|
filament_deretract_speed = 25
|
|
filament_retract_length = 1.8
|
|
filament_max_volumetric_speed = 3
|
|
|
|
# Common printer preset
|
|
[printer:*common*]
|
|
bed_shape = 0x0,320x0,320x350,0x350
|
|
color_change_gcode = M600
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
default_filament_profile = ""
|
|
default_print_profile =
|
|
end_gcode = ;End GCode begin\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off\nG90 ;absolute positioning\nG92 E0\nG1 E-2 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG28 X0 Y0 ; home\nM84 ;steppers off\nM107 ;fan off\nM82 ;absolute extrusion mode\n;End GCode end
|
|
extra_loading_move = -2
|
|
extruder_colour = ""
|
|
extruder_offset = 0x0
|
|
gcode_flavor = marlin
|
|
high_current_on_filament_swap = 0
|
|
machine_limits_usage = time_estimate_only
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 1000
|
|
machine_max_acceleration_retracting = 1000
|
|
machine_max_acceleration_travel = 1500
|
|
machine_max_acceleration_x = 3000
|
|
machine_max_acceleration_y = 3000
|
|
machine_max_acceleration_z = 100
|
|
machine_max_feedrate_e = 25
|
|
machine_max_feedrate_x = 150
|
|
machine_max_feedrate_y = 150
|
|
machine_max_feedrate_z = 50
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
max_layer_height = 0.3
|
|
max_print_height = 330
|
|
min_layer_height = 0.08
|
|
nozzle_diameter = 0.4
|
|
parking_pos_retraction = 92
|
|
pause_print_gcode =
|
|
printer_technology = FFF
|
|
remaining_times = 0
|
|
retract_before_travel = 2
|
|
retract_before_wipe = 0%
|
|
retract_layer_change = 1
|
|
retract_length = 3
|
|
retract_length_toolchange = 10
|
|
retract_lift = 0
|
|
retract_lift_above = 0
|
|
retract_lift_below = 328
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 60
|
|
deretract_speed = 40
|
|
silent_mode = 0
|
|
single_extruder_multi_material = 0
|
|
start_gcode = M82 ;absolute extrusion mode\n;Start GCode begin\nM140 S[first_layer_bed_temperature] ;Start warming Bed\nM104 S[first_layer_temperature] ;Start warming Nozzle\nG28 ; home all axes\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000\nG1 Z0 F1800\nM190 S[first_layer_bed_temperature] ;Wait For Bed Temperature\nM109 S[first_layer_temperature] ;Wait for Hotend Temperature\nG92 E0\nG1 E20 F200 ; Prime extrude for wipe\nG92 E0
|
|
thumbnails = 16x16,220x124
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 0
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 0
|
|
z_offset = 0
|
|
|
|
[printer:Snapmaker A350]
|
|
inherits = *common*
|
|
printer_model = A350
|
|
printer_variant = 0.4
|
|
default_filament_profile = Generic PLA @Snapmaker
|
|
default_print_profile = 0.20mm NORMAL @SnapmakerA350
|
|
|
|
[printer:Snapmaker A250]
|
|
inherits = *common*
|
|
printer_model = A250
|
|
printer_variant = 0.4
|
|
bed_shape = 0x0,230x0,230x250,0x250
|
|
thumbnails =
|
|
variable_layer_height = 0
|
|
retract_lift_below = 0
|
|
max_print_height = 235
|
|
start_gcode = M82 ;absolute extrusion mode\n;Start GCode begin\nM140 S[first_layer_bed_temperature] ;Start Warming Bed\nM104 S160 ;Preheat Nozzle\nG28 ; home all axes\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000\nG1 Z0 F1800\nG1 Z5 F5000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ;Wait For Bed Temperature\nM109 S[first_layer_temperature] ;Wait for Hotend Temperature\nG92 E0\nG1 E10 F200\nG1 E-2 F300\nG92 E0\n;Start GCode end\nG1 F3600 E-2
|
|
end_gcode = M140 S0\n;End GCode begin\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG90 ;absolute positioning\nG92 E0\nG1 E-2 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z330 E-1 F80 ;move Z up a bit and retract filament even more\nG1 X0 F3000 ;move X to min endstops, so the head is out of the way\nG1 Y250 F3000 ;so the head is out of the way and Plate is moved forward\nM84 ;steppers off\n;End GCode end\nM82 ;absolute extrusion mode\nM104 S0\nM107\n;End of Gcode
|
|
default_filament_profile = Generic PLA @Snapmaker
|
|
default_print_profile = 0.20mm NORMAL @SnapmakerA250
|