diff --git a/RackCabinets/RaspberryPi3ModelBHifiBerry/case.scad b/RackCabinets/RaspberryPi3ModelBHifiBerry/case.scad
new file mode 100755
index 0000000..a3f9e6b
--- /dev/null
+++ b/RackCabinets/RaspberryPi3ModelBHifiBerry/case.scad
@@ -0,0 +1,82 @@
+include<../sixinch_library.scad>
+
+
+  ///////////////////////////////
+ // Raspberry Pi 3 Model B    //
+///////////////////////////////
+
+print_frontplate_sml = false;
+print_handle_sml     = false;
+print_cabinet_sml    = false;
+print_lid            = false;
+print_rear           = true;
+
+if(print_frontplate_sml){ // Frontplate //
+    square_hole        = [];
+    round_hole         = [[65 ,7.5, 3.1],[69.5 ,7.5, 3.1]];
+    round_peg          = [];   
+    screw_side_front   = [];
+    screw_top          = [36];
+    screw_bottom_front = [36];
+    units              = 2; 
+    frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
+
+}
+
+if(print_handle_sml){ // Handle // 
+    units              = 2;
+    lay_flat_for_print = false;   
+    handle(units,lay_flat_for_print);
+}
+
+if(print_cabinet_sml){ // Cabinet //  
+    w=88;
+    h=70;
+    screw_bottom_front = [36];
+    screw_side_front   = [];
+    round_peg          = [[w,h,6,2.8,4],
+                          [w-49,h,6,2.8,4],
+                          [w-49,h-58,6,2.8,4],
+                          [w,h-58,6,2.8,4]];
+    depth              = 98;
+    units              = 2;
+    cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front);
+}
+
+if(print_lid){ // Lid // 
+    depth = 98;
+    units = 2;
+    screw_front = [36];//mm
+    screw_back  = [36];//mm
+    lid(98,2,screw_front,screw_back);        
+}
+
+if(print_rear){  // Back plate //    
+    square_hole  = [[37 ,3, 17, 15] , [57 ,4, 15, 16] , [75,4,15,16] ];
+    round_hole   = [[6,5,6],[6,1,6], [24,3.5,3.5],[24,1.2,3.5]  ,[30,3.5,3.5],[30,1.2,3.5]];
+    screw_top    = [36];//mm
+    screw_bottom = [36];//mm
+    screw_side   = [];
+    depth        = 98;
+    units        = 2;
+    back_plate(units,depth,screw_top,screw_bottom,screw_side,square_hole,round_hole);
+}  
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+