# SixInchRack This is a project for 6" cabinets and rack enclusures. For pictures have a look here: - http://www.thingiverse.com/thing:1957436 - http://www.thingiverse.com/thing:1936196 - http://www.thingiverse.com/thing:2084736 The project is a scaled down version of the familiar 19" rack standard, with the following size: - 1U is 14mm - The front plate is 155mm wide - The inside distance between the two vertical profiles is 115mm - The ears protrude 20mm It is designed for the 20x20 extruded aluminium profile, but a profile can also be printed. ##I want to print a simple blank six inch cabinet Go Thingiverse and locate this build: http://www.thingiverse.com/thing:1957436 In the customizer you specify how many units you need in height, and depth in mm you need. Alternatively, fetch these files from the repository:... ##I want to print a simple six inch rack enclosure for cabinets Go Thingiverse and locate this build: http://www.thingiverse.com/thing:1957436 In the customizer you specify which parts you need. Alternatively, fetch these files from the repository:... ##I want to print a 6" cabinet for a specific component Either go to thingiverse where you can find the stl's and pictures, or download the stl's form this repository. Currently the following components are supported by the community: - http://www.thingiverse.com/thing:2084736 Raspberry Pi 3 Model B - http://www.thingiverse.com/thing:1905998 Raspberry Pi B - http://www.thingiverse.com/thing:2151578 Beaglebone Black - http://www.thingiverse.com/thing:2123108 DPS5005 power supply - http://www.thingiverse.com/thing:2105698 Beaglebone Black ##I want to make a new cabinet for my favourite module Start by inspecting this file for inspiration: usb_back.scad 1. Create a new file that includes 2. Customize all the parts needed for your cabinet 3. Create a new folder with you project, and anything else needed like print descriptions 4. If you like, create a Thingiverse build with pictures and your stl, and add a link in this file