prusa-slicer-profiles/filament/F3D TPU.ini

# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-11 at 22:28:16 UTC
bed_temperature = 50
bridge_fan_speed = 100
compatible_printers = 
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
compatible_prints = 
compatible_prints_condition = 
cooling = 1
disable_fan_first_layers = 4
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1.1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #008000
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 32.99
filament_density = 1.21
filament_deretract_speed = 25
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 2.5
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = 3
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0
filament_retract_lift = 0
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = FLEX
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = SainSmart
filament_wipe = 0
first_layer_bed_temperature = 50
first_layer_temperature = 230
full_fan_speed_layer = 6
inherits = SainSmart TPU
max_fan_speed = 80
min_fan_speed = 80
min_print_speed = 15
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K0"
temperature = 230
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-11 at 22:28:16 UTC`
Import into git 2021-08-28 13:09:05 +00:00			`bed_temperature = 50`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`bridge_fan_speed = 100`
Import into git 2021-08-28 13:09:05 +00:00			`compatible_printers =`
			`compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.PRINTER_VENDOR_PRUSA3D./ and printer_notes=~/.PRINTER_MODEL_MK3./ and single_extruder_multi_material)`
			`compatible_prints =`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`compatible_prints_condition =`
Import into git 2021-08-28 13:09:05 +00:00			`cooling = 1`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`disable_fan_first_layers = 4`
Import into git 2021-08-28 13:09:05 +00:00			`end_filament_gcode = "; Filament-specific end gcode"`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`extrusion_multiplier = 1.1`
Import into git 2021-08-28 13:09:05 +00:00			`fan_always_on = 1`
			`fan_below_layer_time = 100`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`filament_colour = #008000`
Import into git 2021-08-28 13:09:05 +00:00			`filament_cooling_final_speed = 3.4`
			`filament_cooling_initial_speed = 2.2`
			`filament_cooling_moves = 4`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`filament_cost = 32.99`
			`filament_density = 1.21`
Import into git 2021-08-28 13:09:05 +00:00			`filament_deretract_speed = 25`
			`filament_diameter = 1.75`
			`filament_load_time = 0`
			`filament_loading_speed = 28`
			`filament_loading_speed_start = 3`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`filament_max_volumetric_speed = 2.5`
Import into git 2021-08-28 13:09:05 +00:00			`filament_minimal_purge_on_wipe_tower = 15`
			`filament_notes = ""`
			`filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0\| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`filament_retract_before_travel = 3`
Import into git 2021-08-28 13:09:05 +00:00			`filament_retract_before_wipe = nil`
			`filament_retract_layer_change = nil`
			`filament_retract_length = 0`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`filament_retract_lift = 0`
Import into git 2021-08-28 13:09:05 +00:00			`filament_retract_lift_above = nil`
			`filament_retract_lift_below = nil`
			`filament_retract_restart_extra = nil`
			`filament_retract_speed = nil`
			`filament_settings_id = ""`
			`filament_soluble = 0`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`filament_spool_weight = 0`
Import into git 2021-08-28 13:09:05 +00:00			`filament_toolchange_delay = 0`
			`filament_type = FLEX`
			`filament_unload_time = 0`
			`filament_unloading_speed = 90`
			`filament_unloading_speed_start = 100`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`filament_vendor = SainSmart`
Import into git 2021-08-28 13:09:05 +00:00			`filament_wipe = 0`
			`first_layer_bed_temperature = 50`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`first_layer_temperature = 230`
			`full_fan_speed_layer = 6`
			`inherits = SainSmart TPU`
			`max_fan_speed = 80`
			`min_fan_speed = 80`
			`min_print_speed = 15`
			`slowdown_below_layer_time = 10`
Import into git 2021-08-28 13:09:05 +00:00			`start_filament_gcode = "M900 K0"`
nie, 13 lut 2022, 23:54:16 CET 2022-02-13 22:54:16 +00:00			`temperature = 230`