2022-01-18 10:42:52 +00:00
# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-17 at 16:07:28 UTC
2022-01-09 00:16:46 +00:00
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_prints =
compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF8000
2022-01-10 18:29:58 +00:00
filament_cooling_final_speed = 10
filament_cooling_initial_speed = 20
filament_cooling_moves = 3
2022-01-09 00:16:46 +00:00
filament_cost = 27.82
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 15
filament_loading_speed = 14
filament_loading_speed_start = 19
filament_max_volumetric_speed = 13
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
2022-01-10 20:37:49 +00:00
filament_ramming_parameters = "130 120 2.71505 2.95699 3.33333 3.87097 4.65054 5.64516 6.69355 7.47312 7.76882 8.06452 9.08602 10.672 11.8548 11.7204 10.0538 8.22581| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
2022-01-09 00:16:46 +00:00
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 230
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 12
2022-01-10 18:29:58 +00:00
filament_unloading_speed = 90
filament_unloading_speed_start = 140
2022-01-09 00:16:46 +00:00
filament_vendor = Made for Prusa
filament_wipe = nil
first_layer_bed_temperature = 60
2022-01-18 10:42:52 +00:00
first_layer_temperature = 230
2022-01-09 00:16:46 +00:00
full_fan_speed_layer = 4
inherits = Prusa PLA @MMU2
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
2022-01-18 10:42:52 +00:00
temperature = 230
