2023-04-28 00:43:47 +00:00
# generated by PrusaSlicer 2.5.2+linux-x64-GTK3 on 2023-04-27 at 21:49:10 UTC
2021-12-31 12:30:40 +00:00
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
2023-04-27 18:23:05 +00:00
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
2021-12-31 12:30:40 +00:00
compatible_prints =
compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF8000
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 20.99
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 15
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
2023-04-28 00:43:47 +00:00
filament_ramming_parameters = "120 100 6.58602 6.74731 7.12366 7.60753 7.95699 8.19893 8.65591 9.35484 10 10.1613 9.46237 8.25269 7.52688 7.5| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
2021-12-31 12:30:40 +00:00
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 250
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Devil Design
filament_wipe = nil
first_layer_bed_temperature = 60
2023-04-28 00:43:47 +00:00
first_layer_temperature = 210
2021-12-31 12:30:40 +00:00
full_fan_speed_layer = 4
2023-04-27 18:23:05 +00:00
inherits = Devil Design PLA
2021-12-31 12:30:40 +00:00
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 15
2023-04-27 18:23:05 +00:00
slowdown_below_layer_time = 10
2021-12-31 12:30:40 +00:00
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
2023-04-28 00:43:47 +00:00
temperature = 205
