prusa-slicer-profiles/print/SUPER SPEED 0.25mm @MINIIS.ini

# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-09-18 at 21:41:14 UTC
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 2
bottom_solid_min_thickness = 0
bridge_acceleration = 8000
bridge_angle = 0
bridge_flow_ratio = 1.05
bridge_speed = 200
brim_separation = 0.1
brim_type = no_brim
brim_width = 0
compatible_printers = 
compatible_printers_condition = printer_notes=~/.*MINIIS.*/ and nozzle_diameter[0]==0.4
complete_objects = 0
default_acceleration = 8000
dont_support_bridges = 0
draft_shield = disabled
elefant_foot_compensation = 0.2
enable_dynamic_overhang_speeds = 0
external_perimeter_acceleration = 5000
external_perimeter_extrusion_width = 0.5
external_perimeter_speed = 200
external_perimeters_first = 0
extra_perimeters = 0
extra_perimeters_on_overhangs = 0
extruder_clearance_height = 20
extruder_clearance_radius = 35
extrusion_width = 0.5
fill_angle = 100
fill_density = 5%
fill_pattern = alignedrectilinear
first_layer_acceleration = 2000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_height = 0.3
first_layer_speed = 60
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 0
gap_fill_speed = 200
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0.008
gcode_substitutions = 
infill_acceleration = 8000
infill_anchor = 0.5
infill_anchor_max = 0.5
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.5
infill_first = 0
infill_overlap = 15%
infill_speed = 200
inherits = 0.20mm SPEED @MINIIS
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.25
max_print_speed = 200
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 4
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes = 
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_0.4n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 25
overhang_speed_3 = 60
overhangs = 1
perimeter_acceleration = 8000
perimeter_extruder = 1
perimeter_extrusion_width = 0.5
perimeter_generator = classic
perimeter_speed = 200
perimeters = 1
post_process = 
print_settings_id = 
raft_contact_distance = 0.15
raft_expansion = 1.5
raft_first_layer_density = 80%
raft_first_layer_expansion = 3.5
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 2
skirt_height = 3
skirts = 0
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 200
solid_infill_acceleration = 8000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.5
solid_infill_speed = 200
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = 0
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.36
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 5
support_material_interface_pattern = auto
support_material_interface_spacing = 0.2
support_material_interface_speed = 50%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 100
support_material_style = snug
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 80%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 30%
thick_bridges = 0
thin_walls = 0
threads = 24
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.5
top_solid_infill_acceleration = 8000
top_solid_infill_speed = 100
top_solid_layers = 4
top_solid_min_thickness = 0
travel_acceleration = 0
travel_speed = 400
travel_speed_z = 12
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0