diff --git a/filament/Rosa 3D PLA Rainbow.ini b/filament/Rosa 3D PLA Rainbow.ini
index b05c72a..31262c0 100644
--- a/filament/Rosa 3D PLA Rainbow.ini	
+++ b/filament/Rosa 3D PLA Rainbow.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-22 at 17:21:48 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-25 at 12:13:52 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -16,7 +16,7 @@ filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
 filament_cost = 123.75
-filament_density = 1.24
+filament_density = 1.25
 filament_deretract_speed = nil
 filament_diameter = 1.75
 filament_load_time = 0
@@ -46,7 +46,7 @@ filament_unloading_speed_start = 100
 filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 60
-first_layer_temperature = 210
+first_layer_temperature = 220
 full_fan_speed_layer = 0
 inherits = 
 max_fan_speed = 100
@@ -54,4 +54,4 @@ min_fan_speed = 100
 min_print_speed = 15
 slowdown_below_layer_time = 15
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode"
-temperature = 210
+temperature = 220
diff --git a/print/QUALITY - 0.15mm - LEGO.ini b/print/QUALITY - 0.15mm - LEGO.ini
index aff344f..e75983b 100644
--- a/print/QUALITY - 0.15mm - LEGO.ini	
+++ b/print/QUALITY - 0.15mm - LEGO.ini	
@@ -1,13 +1,15 @@
-# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-09-09 at 08:29:57 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-28 at 13:59:19 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = rectilinear
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
 bottom_solid_min_thickness = 0
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
 bridge_speed = 30
+brim_separation = 0
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.4
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.45
@@ -29,12 +31,19 @@ fill_angle = 45
 fill_density = 20%
 fill_pattern = rectilinear
 first_layer_acceleration = 1000
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.15
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
+gcode_resolution = 0.0125
 infill_acceleration = 1250
 infill_anchor = 600%
 infill_anchor_max = 50
@@ -56,6 +65,7 @@ layer_height = 0.15
 max_print_speed = 200
 max_volumetric_speed = 0
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -68,6 +78,10 @@ perimeter_speed = 45
 perimeters = 3
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +90,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,7 +102,10 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
 support_material_buildplate_only = 1
+support_material_closing_radius = 2
 support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
@@ -95,25 +113,30 @@ support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
 support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
+thick_bridges = 1
 thin_walls = 1
-threads = 24
-top_fill_pattern = rectilinear
+threads = 4
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 40
 top_solid_layers = 5
 top_solid_min_thickness = 0
 travel_speed = 180
+travel_speed_z = 0
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
diff --git a/print/STRONG - 0.30mm.ini b/print/STRONG - 0.30mm.ini
index a53b2b3..b3556c5 100644
--- a/print/STRONG - 0.30mm.ini	
+++ b/print/STRONG - 0.30mm.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+linux-x64-GTK3 on 2021-02-03 at 07:12:59 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-26 at 13:21:46 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -8,6 +8,8 @@ bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
 bridge_speed = 30
+brim_separation = 0
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.6
@@ -27,14 +29,21 @@ extruder_clearance_radius = 45
 extrusion_width = 0.7
 fill_angle = 45
 fill_density = 25%
-fill_pattern = grid
+fill_pattern = cubic
 first_layer_acceleration = 1000
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
+gcode_resolution = 0.0125
 infill_acceleration = 1250
 infill_anchor = 600%
 infill_anchor_max = 50
@@ -56,6 +65,7 @@ layer_height = 0.3
 max_print_speed = 200
 max_volumetric_speed = 0
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -68,6 +78,10 @@ perimeter_speed = 50
 perimeters = 5
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +90,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 30
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,7 +102,10 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
 support_material_buildplate_only = 0
+support_material_closing_radius = 2
 support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
@@ -95,25 +113,30 @@ support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 45
+support_material_style = grid
 support_material_synchronize_layers = 0
 support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
+thick_bridges = 1
 thin_walls = 1
-threads = 24
+threads = 4
 top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.45
 top_solid_infill_speed = 40
 top_solid_layers = 4
 top_solid_min_thickness = 0
 travel_speed = 180
+travel_speed_z = 0
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60