diff --git a/print/QUALITY - 0.20mm.ini b/print/QUALITY - 0.20mm.ini
index 1cb97f0..b10db27 100644
--- a/print/QUALITY - 0.20mm.ini	
+++ b/print/QUALITY - 0.20mm.ini	
@@ -1,13 +1,13 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-01 at 09:40:55 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-12 at 12:50:11 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
-bottom_solid_min_thickness = 0
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_separation = 0.1
 brim_type = outer_only
 brim_width = 0
@@ -16,7 +16,7 @@ compatible_printers =
 compatible_printers_condition = nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
-dont_support_bridges = 1
+dont_support_bridges = 0
 draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
@@ -25,7 +25,7 @@ external_perimeter_speed = 25
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 10%
@@ -46,15 +46,15 @@ gcode_label_objects = 1
 gcode_resolution = 0.0125
 infill_acceleration = 1000
 infill_anchor = 2.5
-infill_anchor_max = 50
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
-infill_only_where_needed = 1
+infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 80
-inherits = 
+inherits = 0.20mm QUALITY @MK3
 interface_shells = 0
 ironing = 0
 ironing_flowrate = 15%
@@ -99,9 +99,9 @@ solid_infill_extrusion_width = 0.45
 solid_infill_speed = 80
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 1
+support_material = 0
 support_material_angle = 0
-support_material_auto = 0
+support_material_auto = 1
 support_material_bottom_contact_distance = 0
 support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 0
@@ -121,17 +121,17 @@ support_material_spacing = 2
 support_material_speed = 50
 support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thick_bridges = 1
-thin_walls = 0
-threads = 4
+thin_walls = 1
+threads = 24
 top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 40
 top_solid_layers = 5
-top_solid_min_thickness = 0
+top_solid_min_thickness = 0.7
 travel_speed = 180
 travel_speed_z = 12
 wipe_tower = 1