diff --git a/.gitignore b/.gitignore
index 10296b4..f27515a 100644
--- a/.gitignore
+++ b/.gitignore
@@ -11,3 +11,5 @@ vendor/
 backup.csv
 PrusaSlicer.ini
 PrusaSlicerGcodeViewer.ini
+
+.idea/
diff --git a/print/SUPER SPEED 0.25mm @MINIIS.ini b/print/SUPER SPEED 0.25mm @MINIIS.ini
index dd88551..c1dd92d 100644
--- a/print/SUPER SPEED 0.25mm @MINIIS.ini	
+++ b/print/SUPER SPEED 0.25mm @MINIIS.ini	
@@ -1,7 +1,7 @@
 # generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-09-18 at 21:41:14 UTC
 avoid_crossing_curled_overhangs = 0
 avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
+avoid_crossing_perimeters_max_detour = 10
 bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
 bottom_solid_min_thickness = 0
@@ -19,16 +19,16 @@ default_acceleration = 8000
 dont_support_bridges = 0
 draft_shield = disabled
 elefant_foot_compensation = 0.2
-enable_dynamic_overhang_speeds = 0
+enable_dynamic_overhang_speeds = 1
 external_perimeter_acceleration = 5000
 external_perimeter_extrusion_width = 0.5
 external_perimeter_speed = 200
 external_perimeters_first = 0
 extra_perimeters = 0
 extra_perimeters_on_overhangs = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 35
-extrusion_width = 0.5
+extruder_clearance_height = 14
+extruder_clearance_radius = 45
+extrusion_width = 0.45
 fill_angle = 100
 fill_density = 5%
 fill_pattern = alignedrectilinear
@@ -44,9 +44,9 @@ fuzzy_skin_thickness = 0.3
 gap_fill_enabled = 0
 gap_fill_speed = 200
 gcode_comments = 0
-gcode_label_objects = 1
+gcode_label_objects = 0
 gcode_resolution = 0.008
-gcode_substitutions = 
+gcode_substitutions =
 infill_acceleration = 8000
 infill_anchor = 0.5
 infill_anchor_max = 0.5
@@ -73,14 +73,14 @@ min_feature_size = 25%
 min_skirt_length = 4
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 0
+notes =
+only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_0.4n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
-overhang_speed_0 = 15
-overhang_speed_1 = 20
-overhang_speed_2 = 25
-overhang_speed_3 = 60
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhang_speed_0 = 100%
+overhang_speed_1 = 100%
+overhang_speed_2 = 100%
+overhang_speed_3 = 100%
 overhangs = 1
 perimeter_acceleration = 8000
 perimeter_extruder = 1
@@ -89,15 +89,15 @@ perimeter_generator = classic
 perimeter_speed = 200
 perimeters = 1
 post_process = 
-print_settings_id = 
-raft_contact_distance = 0.15
+print_settings_id =
+raft_contact_distance = 0
 raft_expansion = 1.5
-raft_first_layer_density = 80%
-raft_first_layer_expansion = 3.5
+raft_first_layer_density = 50%
+raft_first_layer_expansion = 1.5
 raft_layers = 0
 resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
+seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
 skirts = 0
@@ -129,10 +129,10 @@ support_material_interface_extruder = 0
 support_material_interface_layers = 5
 support_material_interface_pattern = auto
 support_material_interface_spacing = 0.2
-support_material_interface_speed = 50%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
-support_material_speed = 100
+support_material_speed = 50
 support_material_style = snug
 support_material_synchronize_layers = 0
 support_material_threshold = 40
@@ -162,8 +162,8 @@ wall_distribution_count = 1
 wall_transition_angle = 10
 wall_transition_filter_deviation = 25%
 wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
+wipe_tower = 1
+wipe_tower_bridging = 8
 wipe_tower_brim_width = 2
 wipe_tower_cone_angle = 0
 wipe_tower_extra_spacing = 100%
@@ -171,6 +171,6 @@ wipe_tower_extruder = 0
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
+wipe_tower_x = 170
+wipe_tower_y = 125
 xy_size_compensation = 0