2023.09.19 19:25

print/SPEED 0.2mm @MINIIS.ini

@@ -0,0 +1,176 @@
+# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-09-19 at 11:23:06 UTC
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0
+bridge_acceleration = 8000
+bridge_angle = 0
+bridge_flow_ratio = 1.05
+bridge_speed = 200
+brim_separation = 0.1
+brim_type = no_brim
+brim_width = 0
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*MINIIS.*/ and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 8000
+dont_support_bridges = 0
+draft_shield = disabled
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 5000
+external_perimeter_extrusion_width = 0.5
+external_perimeter_speed = 200
+external_perimeters_first = 0
+extra_perimeters = 0
+extra_perimeters_on_overhangs = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 35
+extrusion_width = 0.5
+fill_angle = 45
+fill_density = 10%
+fill_pattern = rectilinear
+first_layer_acceleration = 2000
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.5
+first_layer_height = 0.2
+first_layer_speed = 60
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 0
+gap_fill_speed = 200
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0.008
+gcode_substitutions = 
+infill_acceleration = 8000
+infill_anchor = 2.5
+infill_anchor_max = 12
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_overlap = 15%
+infill_speed = 200
+inherits = 0.20mm SPEED @MINIIS
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_bead_width = 85%
+min_feature_size = 25%
+min_skirt_length = 4
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_0.4n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
+overhang_speed_0 = 15
+overhang_speed_1 = 20
+overhang_speed_2 = 25
+overhang_speed_3 = 60
+overhangs = 1
+perimeter_acceleration = 8000
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.5
+perimeter_generator = classic
+perimeter_speed = 200
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.15
+raft_expansion = 1.5
+raft_first_layer_density = 80%
+raft_first_layer_expansion = 3.5
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 3
+skirts = 0
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 200
+solid_infill_acceleration = 8000
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.5
+solid_infill_speed = 200
+spiral_vase = 0
+staggered_inner_seams = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.36
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 5
+support_material_interface_pattern = auto
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 50%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 100
+support_material_style = snug
+support_material_synchronize_layers = 0
+support_material_threshold = 40
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 30%
+thick_bridges = 0
+thin_walls = 0
+threads = 16
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.5
+top_solid_infill_acceleration = 8000
+top_solid_infill_speed = 100
+top_solid_layers = 4
+top_solid_min_thickness = 0
+travel_acceleration = 0
+travel_speed = 400
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_extruder = 0
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0