diff --git a/filament/DevilDesign PET-G.ini b/filament/DevilDesign PET-G.ini
index abb1019..fd72413 100644
--- a/filament/DevilDesign PET-G.ini	
+++ b/filament/DevilDesign PET-G.ini	
@@ -1,5 +1,5 @@
-# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-29 at 21:17:02 UTC
-bed_temperature = 90
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-16 at 09:05:38 UTC
+bed_temperature = 60
 bridge_fan_speed = 50
 compatible_printers = 
 compatible_printers_condition = 
@@ -45,8 +45,8 @@ filament_unloading_speed = 90
 filament_unloading_speed_start = 100
 filament_vendor = (Unknown)
 filament_wipe = nil
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
+first_layer_bed_temperature = 60
+first_layer_temperature = 220
 full_fan_speed_layer = 5
 inherits = 
 max_fan_speed = 50
@@ -54,4 +54,4 @@ min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 15
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}24{else}45{endif} ; Filament gcode"
-temperature = 230
+temperature = 220
diff --git a/filament/Fiberflex 30D @ Tevo Tarantula.ini b/filament/Fiberflex 30D @ Tevo Tarantula.ini
index 95bc36f..13f6d2d 100644
--- a/filament/Fiberflex 30D @ Tevo Tarantula.ini	
+++ b/filament/Fiberflex 30D @ Tevo Tarantula.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-04-04 at 20:19:46 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-16 at 09:04:52 UTC
 bed_temperature = 50
 bridge_fan_speed = 100
 compatible_printers = "Tevo Tarantula";"Tevo Tarantula Dual"
@@ -46,7 +46,7 @@ filament_unloading_speed_start = 100
 filament_vendor = SainSmart
 filament_wipe = 0
 first_layer_bed_temperature = 50
-first_layer_temperature = 210
+first_layer_temperature = 220
 full_fan_speed_layer = 6
 inherits = 
 max_fan_speed = 70
@@ -54,4 +54,4 @@ min_fan_speed = 50
 min_print_speed = 15
 slowdown_below_layer_time = 10
 start_filament_gcode = "M900 K0"
-temperature = 210
+temperature = 220