diff --git a/print/QUALITY - 0.20mm @ DevilDesign Galaxy Black.ini b/print/QUALITY - 0.20mm @ DevilDesign Galaxy Black.ini
deleted file mode 100644
index 08c6565..0000000
--- a/print/QUALITY - 0.20mm @ DevilDesign Galaxy Black.ini	
+++ /dev/null
@@ -1,145 +0,0 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-21 at 13:49:10 UTC
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 4
-bottom_solid_min_thickness = 0
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 30
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 25
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 10%
-fill_pattern = rectilinear
-first_layer_acceleration = 1000
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 20
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_label_objects = 1
-gcode_resolution = 0.0125
-infill_acceleration = 1250
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 40
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_speed = 0
-min_skirt_length = 4
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-single_extruder_multi_material_priming = 0
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 25
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.1
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 40
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 55
-support_material_with_sheath = 0
-support_material_xy_spacing = 50%
-thick_bridges = 1
-thin_walls = 0
-threads = 4
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
-top_solid_layers = 5
-top_solid_min_thickness = 0
-travel_speed = 180
-travel_speed_z = 0
-wipe_tower = 1
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 170
-wipe_tower_y = 125
-xy_size_compensation = 0
diff --git a/print/QUALITY - 0.20mm @ TevoTarantula.ini b/print/QUALITY - 0.20mm @ TevoTarantula.ini
index a48a792..ffe272e 100644
--- a/print/QUALITY - 0.20mm @ TevoTarantula.ini	
+++ b/print/QUALITY - 0.20mm @ TevoTarantula.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-30 at 21:49:33 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-04-02 at 11:44:28 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -140,6 +140,6 @@ wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 170
-wipe_tower_y = 125
+wipe_tower_x = 110
+wipe_tower_y = 150
 xy_size_compensation = 0
diff --git a/printer/Tevo Tarantula Dual.ini b/printer/Tevo Tarantula Dual.ini
index 070bfa2..59fe2a9 100644
--- a/printer/Tevo Tarantula Dual.ini	
+++ b/printer/Tevo Tarantula Dual.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-31 at 20:05:34 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-04-04 at 07:15:43 UTC
 bed_custom_model = 
 bed_custom_texture = 
 bed_shape = 0x0,200x0,200x200,0x200
@@ -11,8 +11,8 @@ default_filament_profile =
 default_print_profile = 
 deretract_speed = 0,0
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n\nM104 S0  ; turn off hotend temperature\nM140 S40 ; set heatbed to 40C\n\nG28 X0  ; home X axis\nG1 Y200 ; move pirint bed to the front\n\nM84     ; disable motors\n
-extra_loading_move = -2
-extruder_colour = ;
+extra_loading_move = 0
+extruder_colour = #33D17A;#FF0000
 extruder_offset = 0x0,0x0
 gcode_flavor = marlin2
 high_current_on_filament_swap = 0
@@ -27,7 +27,7 @@ machine_max_acceleration_travel = 1500,1250
 machine_max_acceleration_x = 1000,1000
 machine_max_acceleration_y = 1000,1000
 machine_max_acceleration_z = 500,200
-machine_max_feedrate_e = 100,100
+machine_max_feedrate_e = 80,80
 machine_max_feedrate_x = 200,200
 machine_max_feedrate_y = 200,200
 machine_max_feedrate_z = 12,12
@@ -41,7 +41,7 @@ max_layer_height = 0,0
 max_print_height = 170
 min_layer_height = 0.07,0.07
 nozzle_diameter = 0.4,0.4
-parking_pos_retraction = 92
+parking_pos_retraction = 0
 pause_print_gcode = M601
 print_host = 
 printer_model = 
@@ -56,16 +56,16 @@ remaining_times = 1
 retract_before_travel = 2,2
 retract_before_wipe = 0%,0%
 retract_layer_change = 0,0
-retract_length = 0.8,0.8
+retract_length = 5,5
 retract_length_toolchange = 10,10
-retract_lift = 0.4,0.4
+retract_lift = 0,0
 retract_lift_above = 0,0
 retract_lift_below = 0,0
 retract_restart_extra = 0,0
 retract_restart_extra_toolchange = 0,0
 retract_speed = 35,35
 silent_mode = 1
-single_extruder_multi_material = 1
+single_extruder_multi_material = 0
 start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG28 ; home all axes\nG29 ; Bed level\nG1 X0 Y0 F5000; Move to 0,0\nG1 Z5 F5000 ; lift nozzle\n
 template_custom_gcode = 
 thumbnails = 
diff --git a/printer/Tevo Tarantula Mixing.ini b/printer/Tevo Tarantula Mixing.ini
deleted file mode 100644
index b5c86d6..0000000
--- a/printer/Tevo Tarantula Mixing.ini	
+++ /dev/null
@@ -1,78 +0,0 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-16 at 23:48:51 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,200x0,200x200,0x200
-before_layer_gcode = 
-between_objects_gcode = 
-color_change_gcode = M600
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = 
-default_print_profile = 
-deretract_speed = 0,0
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n\nM104 S0  ; turn off hotend temperature\nM140 S40 ; set heatbed to 40C\n\nG28 X0  ; home X axis\nG1 Y200 ; move pirint bed to the front\n\nM84     ; disable motors\n
-extra_loading_move = -2
-extruder_colour = ;
-extruder_offset = 0x0,0x0
-gcode_flavor = marlin2
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_limits_usage = emit_to_gcode
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 9000,1000
-machine_max_acceleration_y = 9000,1000
-machine_max_acceleration_z = 500,200
-machine_max_feedrate_e = 120,120
-machine_max_feedrate_x = 500,200
-machine_max_feedrate_y = 500,200
-machine_max_feedrate_z = 12,12
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 10,10
-machine_max_jerk_y = 10,10
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0,0
-max_print_height = 170
-min_layer_height = 0.07,0.07
-nozzle_diameter = 0.4,0.4
-parking_pos_retraction = 92
-pause_print_gcode = M601
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2,2
-retract_before_wipe = 0%,0%
-retract_layer_change = 0,0
-retract_length = 2,2
-retract_length_toolchange = 10,10
-retract_lift = 0,0
-retract_lift_above = 0,0
-retract_lift_below = 0,0
-retract_restart_extra = 0,0
-retract_restart_extra_toolchange = 0,0
-retract_speed = 40,40
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = M16 "Tevo Tarantula"\nG28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n
-template_custom_gcode = 
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0,0
-z_offset = 0