From 478a0a09cc0aaa93bdd0c9176800d3451e2d3d76 Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Wed, 14 Dec 2022 10:19:27 +0100 Subject: [PATCH] 2022.12.14 10:19 --- print/AUTO VASE - 0.20mm.ini | 155 ++++++++++++++++++ print/QUALITY - 0.20mm.ini | 6 +- ...iginal Prusa i3 MK3S & MK3S+ Autoprint.ini | 79 +++++++++ 3 files changed, 237 insertions(+), 3 deletions(-) create mode 100644 print/AUTO VASE - 0.20mm.ini create mode 100644 printer/Original Prusa i3 MK3S & MK3S+ Autoprint.ini diff --git a/print/AUTO VASE - 0.20mm.ini b/print/AUTO VASE - 0.20mm.ini new file mode 100644 index 0000000..b8472ea --- /dev/null +++ b/print/AUTO VASE - 0.20mm.ini @@ -0,0 +1,155 @@ +# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2022-12-13 at 23:28:47 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 0 +bottom_solid_min_thickness = 0.5 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 25 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 1 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = nozzle_diameter[0]==0.4 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 0% +fill_pattern = rectilinear +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 40 +gcode_comments = 1 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 12 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 80 +inherits = 0.20mm QUALITY @MK3 +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.2 +max_print_speed = 200 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_bead_width = 85% +min_feature_size = 25% +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_generator = arachne +perimeter_speed = 45 +perimeters = 1 +post_process = +print_settings_id = QUALITY - 0.20mm +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = aligned +single_extruder_multi_material_priming = 0 +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 80 +spiral_vase = 1 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.2 +support_material_interface_speed = 80% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 15 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thick_bridges = 0 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 40 +top_solid_layers = 0 +top_solid_min_thickness = 0.7 +travel_speed = 180 +travel_speed_z = 12 +wall_distribution_count = 1 +wall_transition_angle = 10 +wall_transition_filter_deviation = 25% +wall_transition_length = 0.4 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 125 +xy_size_compensation = 0 diff --git a/print/QUALITY - 0.20mm.ini b/print/QUALITY - 0.20mm.ini index ddacb5e..2f68084 100644 --- a/print/QUALITY - 0.20mm.ini +++ b/print/QUALITY - 0.20mm.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2022-11-23 at 13:39:48 UTC +# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2022-12-13 at 19:30:04 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic @@ -132,7 +132,7 @@ support_material_with_sheath = 0 support_material_xy_spacing = 60% thick_bridges = 0 thin_walls = 1 -threads = 16 +threads = 24 top_fill_pattern = monotonic top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 @@ -143,7 +143,7 @@ travel_speed_z = 12 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% -wall_transition_length = 100% +wall_transition_length = 0.4 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 diff --git a/printer/Original Prusa i3 MK3S & MK3S+ Autoprint.ini b/printer/Original Prusa i3 MK3S & MK3S+ Autoprint.ini new file mode 100644 index 0000000..e76b4ad --- /dev/null +++ b/printer/Original Prusa i3 MK3S & MK3S+ Autoprint.ini @@ -0,0 +1,79 @@ +# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2022-12-13 at 19:26:27 UTC +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n +between_objects_gcode = +color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = "Prusament PLA" +default_print_profile = 0.15mm QUALITY @MK3 +deretract_speed = 0 +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM107 ; turn off fan\n\n; Cleaning bed\nG1 X125 Y210 F3000 ; Move print head to middle and print bed to front\nG1 Z10 F3000 ; Move print head down\nG1 Y0 F3000 ; Move print bed to back\nG1 Y210 F3000 ; Move print bed to front\nM84 ; disable motors +extra_loading_move = -2 +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin +high_current_on_filament_swap = 0 +host_type = octoprint +inherits = Original Prusa i3 MK3S & MK3S+ +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +machine_limits_usage = emit_to_gcode +machine_max_acceleration_e = 5000,5000 +machine_max_acceleration_extruding = 1250,1250 +machine_max_acceleration_retracting = 1250,1250 +machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_x = 1000,960 +machine_max_acceleration_y = 1000,960 +machine_max_acceleration_z = 200,200 +machine_max_feedrate_e = 120,120 +machine_max_feedrate_x = 200,100 +machine_max_feedrate_y = 200,100 +machine_max_feedrate_z = 12,12 +machine_max_jerk_e = 4.5,4.5 +machine_max_jerk_x = 8,8 +machine_max_jerk_y = 8,8 +machine_max_jerk_z = 0.4,0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_layer_height = 0.25 +max_print_height = 210 +min_layer_height = 0.07 +nozzle_diameter = 0.4 +parking_pos_retraction = 92 +pause_print_gcode = M601 +print_host = +printer_model = MK3S +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n +printer_settings_id = +printer_technology = FFF +printer_variant = 0.4 +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 1 +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 4 +retract_lift = 0.4 +retract_lift_above = 0 +retract_lift_below = 209 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +silent_mode = 1 +single_extruder_multi_material = 0 +start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; No intro line\n\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +template_custom_gcode = +thumbnails = 160x120 +thumbnails_format = PNG +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0