diff --git a/printer/kodak - kodak-config-bundle.ini b/printer/kodak - kodak-config-bundle.ini new file mode 100644 index 0000000..4f024f9 --- /dev/null +++ b/printer/kodak - kodak-config-bundle.ini @@ -0,0 +1,85 @@ +# generated by PrusaSlicer 2.7.1+linux-x64-GTK3 on 2024-01-28 at 22:24:38 UTC +autoemit_temperature_commands = 0 +bed_custom_model = /home/pgrondek/Downloads/kodak/kodak-bed-v2.stl +bed_custom_texture = /home/pgrondek/Downloads/kodak/texture.png +bed_shape = -40x-10,220x-10,220x220,-40x220 +before_layer_gcode = +between_objects_gcode = +binary_gcode = 0 +color_change_gcode = M600 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = +default_print_profile = +deretract_speed = 0,0 +end_gcode = G1 Z{min(max_layer_z+49, max_print_height)} E-30 F720\n; park\nG28 X Y\n\nM104 T0 S0\nM104 T1 S0\nM140 S0 +extra_loading_move = -2 +extruder_colour = #62A0EA;#8FF0A4 +extruder_offset = 0x0,0x0 +gcode_flavor = klipper +high_current_on_filament_swap = 0 +host_type = prusalink +inherits = +layer_gcode = +machine_limits_usage = time_estimate_only +machine_max_acceleration_e = 10000,5000 +machine_max_acceleration_extruding = 5500,5500 +machine_max_acceleration_retracting = 5500,5500 +machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_x = 5500,5500 +machine_max_acceleration_y = 5500,5500 +machine_max_acceleration_z = 50,50 +machine_max_feedrate_e = 120,120 +machine_max_feedrate_x = 200,200 +machine_max_feedrate_y = 200,200 +machine_max_feedrate_z = 30,30 +machine_max_jerk_e = 0,0 +machine_max_jerk_x = 0,0 +machine_max_jerk_y = 0,0 +machine_max_jerk_z = 0,0 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_layer_height = 0,0 +max_print_height = 225 +min_layer_height = 0.07,0.07 +nozzle_diameter = 0.4,0.4 +parking_pos_retraction = 92 +pause_print_gcode = M601 +print_host = +printer_model = +printer_notes = +printer_settings_id = +printer_technology = FFF +printer_variant = +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 1 +retract_before_travel = 2,2 +retract_before_wipe = 0%,0% +retract_layer_change = 0,0 +retract_length = 2,2 +retract_length_toolchange = 10,10 +retract_lift = 0,0 +retract_lift_above = 0,0 +retract_lift_below = 0,0 +retract_restart_extra = 0,0 +retract_restart_extra_toolchange = 0,0 +retract_speed = 40,40 +silent_mode = 1 +single_extruder_multi_material = 0 +start_gcode = PRINT_START T0_USED={ is_extruder_used[0] } T1_USED={ is_extruder_used[1] } T0_TARGET_TEMPERATURE={ first_layer_temperature[0] } T1_TARGET_TEMPERATURE={ first_layer_temperature[1] } BED_TEMPERATURE=[first_layer_bed_temperature] +template_custom_gcode = +thumbnails = 640x360/PNG +thumbnails_format = PNG +toolchange_gcode = ; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n\nM117 tool change [previous_extruder] -> [next_extruder]\n\n; moving up\nG1 Z{layer_z + 5} F5000\n\nT{next_extruder} HOT=1 RETRACT=1\n\n{if layer_num == 0 }\nM109 T{next_extruder} S{first_layer_temperature[next_extruder]}\n{else}\nM109 T{next_extruder} S{temperature[next_extruder]}\n{endif}\n\n; moving back down\nG1 Z{layer_z}\n +travel_lift_before_obstacle = 0,0 +travel_max_lift = 0,0 +travel_ramping_lift = 0,0 +travel_slope = 0,0 +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 0,0 +z_offset = 0