pon, 17 sty 2022, 00:53:29 CET

printer/Tevo Tarantula Mixing.ini

@@ -0,0 +1,78 @@
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-16 at 23:48:51 UTC
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,200x0,200x200,0x200
+before_layer_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = 
+default_print_profile = 
+deretract_speed = 0,0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n\nM104 S0  ; turn off hotend temperature\nM140 S40 ; set heatbed to 40C\n\nG28 X0  ; home X axis\nG1 Y200 ; move pirint bed to the front\n\nM84     ; disable motors\n
+extra_loading_move = -2
+extruder_colour = ;
+extruder_offset = 0x0,0x0
+gcode_flavor = marlin2
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+layer_gcode = 
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 10000,5000
+machine_max_acceleration_extruding = 1500,1250
+machine_max_acceleration_retracting = 1500,1250
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 9000,1000
+machine_max_acceleration_y = 9000,1000
+machine_max_acceleration_z = 500,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 500,200
+machine_max_feedrate_y = 500,200
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.2,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0,0
+max_print_height = 170
+min_layer_height = 0.07,0.07
+nozzle_diameter = 0.4,0.4
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 1
+retract_before_travel = 2,2
+retract_before_wipe = 0%,0%
+retract_layer_change = 0,0
+retract_length = 2,2
+retract_length_toolchange = 10,10
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 40,40
+silent_mode = 1
+single_extruder_multi_material = 0
+start_gcode = M16 "Tevo Tarantula"\nG28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n
+template_custom_gcode = 
+thumbnails = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0,0
+z_offset = 0

printer/Tevo Tarantula.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-08 at 09:59:02 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-16 at 23:48:56 UTC
 bed_custom_model = 
 bed_custom_texture = 
 bed_shape = 0x0,200x0,200x200,0x200
@@ -52,7 +52,7 @@ printer_variant =
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
-remaining_times = 0
+remaining_times = 1
 retract_before_travel = 2
 retract_before_wipe = 0%
 retract_layer_change = 0