From 507a16ef58eddc6a18df5e171b8adec91aa944f9 Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Sat, 20 Jul 2024 18:19:28 +0200 Subject: [PATCH] 2024.07.20 18:19 --- filament/Fiberlogy FiberFlex 40D @all.ini | 75 ++++++++++++++++ ...rusa MK4 0.4 nozzle - text over things.ini | 86 +++++++++++++++++++ 2 files changed, 161 insertions(+) create mode 100644 filament/Fiberlogy FiberFlex 40D @all.ini create mode 100644 printer/Original Prusa MK4 0.4 nozzle - text over things.ini diff --git a/filament/Fiberlogy FiberFlex 40D @all.ini b/filament/Fiberlogy FiberFlex 40D @all.ini new file mode 100644 index 0000000..a48c085 --- /dev/null +++ b/filament/Fiberlogy FiberFlex 40D @all.ini @@ -0,0 +1,75 @@ +# generated by PrusaSlicer 2.7.4+linux-x64-GTK3 on 2024-07-20 at 15:51:12 UTC +bed_temperature = 60 +bridge_fan_speed = 75 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 5 +enable_dynamic_fan_speeds = 0 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #008000 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 39.41 +filament_density = 1.16 +filament_deretract_speed = 20 +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 4 +filament_minimal_purge_on_wipe_tower = 15 +filament_multitool_ramming = 0 +filament_multitool_ramming_flow = 10 +filament_multitool_ramming_volume = 10 +filament_notes = "" +filament_purge_multiplier = 100% +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = 2 +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = 2.2 +filament_retract_length_toolchange = nil +filament_retract_lift = 0 +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_restart_extra_toolchange = nil +filament_retract_speed = 60 +filament_settings_id = "" +filament_soluble = 0 +filament_spool_weight = 330 +filament_stamping_distance = 0 +filament_stamping_loading_speed = 20 +filament_toolchange_delay = 0 +filament_travel_lift_before_obstacle = nil +filament_travel_max_lift = 0.6 +filament_travel_ramping_lift = nil +filament_travel_slope = nil +filament_type = FLEX +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = Fiberlogy +filament_wipe = 0 +first_layer_bed_temperature = 60 +first_layer_temperature = 220 +full_fan_speed_layer = 5 +idle_temperature = 70 +inherits = Fiberlogy FiberFlex 40D @MK4 +max_fan_speed = 75 +min_fan_speed = 25 +min_print_speed = 15 +overhang_fan_speed_0 = 0 +overhang_fan_speed_1 = 0 +overhang_fan_speed_2 = 0 +overhang_fan_speed_3 = 0 +slowdown_below_layer_time = 15 +start_filament_gcode = "M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" +temperature = 220 diff --git a/printer/Original Prusa MK4 0.4 nozzle - text over things.ini b/printer/Original Prusa MK4 0.4 nozzle - text over things.ini new file mode 100644 index 0000000..a76cd1d --- /dev/null +++ b/printer/Original Prusa MK4 0.4 nozzle - text over things.ini @@ -0,0 +1,86 @@ +# generated by PrusaSlicer 2.7.4+linux-x64-GTK3 on 2024-07-20 at 13:54:43 UTC +autoemit_temperature_commands = 1 +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n +between_objects_gcode = +binary_gcode = 1 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = "Prusament PLA @PG" +default_print_profile = 0.20mm QUALITY @MK4 0.4 +deretract_speed = 25 +end_gcode = M17 ; enable steppers\\nM862.3 P "[printer_model]" ; printer model check\\nM862.1 P[nozzle_diameter] ; nozzle diameter check\\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\\n\\nG90 ; use absolute coordinates\\nM83 ; extruder relative mode\\n\\nM140 S[first_layer_bed_temperature] ; set bed temp\\n{if filament_type[initial_tool]=="PC" or filament_type[initial_tool]=="NYLON"}\\nM104 S{first_layer_temperature[initial_tool]-25} ; set extruder temp for bed leveling\\nM109 R{first_layer_temperature[initial_tool]-25} ; wait for temp\\n{elsif filament_type[initial_tool]=="FLEX"}\\nM104 S210 ; set extruder temp for bed leveling\\nM109 R210 ; wait for temp\\n{else}\\nM104 S170 ; set extruder temp for bed leveling\\nM109 R170 ; wait for temp\\n{endif}\\n\\nM84 E ; turn off E motor\\n\\nG28 ; home all without mesh bed level\\n\\n; probe to clean the nozzle\\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)+32} Y{((first_layer_print_min[1]) - 4)} Z{5} F4800\\n\\nM302 S160 ; lower cold extrusion limit to 160C\\n\\n{if filament_type[initial_tool]=="FLEX"}\\nG1 E-4 F2400 ; retraction\\n{else}\\nG1 E-2 F2400 ; retraction\\n{endif}\\n\\nM84 E ; turn off E motor\\n\\nG29 P9 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{32} H{4}\\n\\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S100{endif}\\n\\nG0 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} Z{40} F10000\\n\\nM190 S[first_layer_bed_temperature] ; wait for bed temp\\n\\nM107\\n\\n;\\n; MBL\\n;\\nM84 E ; turn off E motor\\nG29 ; mesh bed leveling\\nM104 S[first_layer_temperature] ; set extruder temp\\nG0 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4) + 4 - 4.5} Z{30} F4800\\n\\nM109 S[first_layer_temperature] ; wait for extruder temp\\nG1 Z0.2 F720\\nG92 E0\\n\\nM569 S0 E ; set spreadcycle mode for extruder\\n\\n;\\n; Extrude purge line\\n;\\n{if filament_type[initial_tool]=="FLEX"}\\nG1 E4 F2400 ; deretraction\\n{else}\\nG1 E2 F2400 ; deretraction\\n{endif}\\n\\n; move right\\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) + 32} E{32 * 0.15} F1000\\n; move down\\nG1 Y{(max(0, first_layer_print_min[1]) - 4) + 4 - 4.5 - 1.5} E{1.5 * 0.15} F1000\\n; move left\\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} E{32 * 0.30} F800\\n\\nG92 E0\\nM221 S100 ; set flow to 100% +extra_loading_move = -2 +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin2 +high_current_on_filament_swap = 0 +host_type = prusalink +inherits = Original Prusa MK4 0.4 nozzle +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +machine_limits_usage = emit_to_gcode +machine_max_acceleration_e = 2500,2500 +machine_max_acceleration_extruding = 2000,2000 +machine_max_acceleration_retracting = 1200,1200 +machine_max_acceleration_travel = 2000,2000 +machine_max_acceleration_x = 2500,2500 +machine_max_acceleration_y = 2500,2500 +machine_max_acceleration_z = 200,200 +machine_max_feedrate_e = 100,100 +machine_max_feedrate_x = 200,160 +machine_max_feedrate_y = 200,160 +machine_max_feedrate_z = 40,40 +machine_max_jerk_e = 10,10 +machine_max_jerk_x = 8,8 +machine_max_jerk_y = 8,8 +machine_max_jerk_z = 2,2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +max_layer_height = 0.3 +max_print_height = 220 +min_layer_height = 0.07 +multimaterial_purging = 140 +nozzle_diameter = 0.4 +parking_pos_retraction = 92 +pause_print_gcode = M601 +print_host = +printer_model = MK4 +printer_notes = Do not remove the keywords below.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK4\nPG +printer_settings_id = +printer_technology = FFF +printer_variant = 0.4 +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 1 +retract_before_travel = 1.5 +retract_before_wipe = 80% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 0 +retract_lift = 0.2 +retract_lift_above = 0 +retract_lift_below = 219 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +silent_mode = 1 +single_extruder_multi_material = 0 +start_gcode = M17 ; enable steppers\nM862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\n{if filament_type[initial_tool]=="PC" or filament_type[initial_tool]=="NYLON"}\nM104 S{first_layer_temperature[initial_tool]-25} ; set extruder temp for bed leveling\nM109 R{first_layer_temperature[initial_tool]-25} ; wait for temp\n{elsif filament_type[initial_tool]=="FLEX"}\nM104 S210 ; set extruder temp for bed leveling\nM109 R210 ; wait for temp\n{else}\nM104 S170 ; set extruder temp for bed leveling\nM109 R170 ; wait for temp\n{endif}\n\nM84 E ; turn off E motor\n\nG28 ; home all without mesh bed level\n\n; probe to clean the nozzle\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)+32} Y{((first_layer_print_min[1]) - 4)} Z{5} F4800\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]=="FLEX"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\nG29 P9 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{32} H{4}\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S100{endif}\n\nG0 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} Z{40} F10000\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nM107\n\n;\n; MBL\n;\nM84 E ; turn off E motor\nG29 ; mesh bed leveling\nM104 S[first_layer_temperature] ; set extruder temp\nG0 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4) + 4 - 4.5} Z{30} F4800\n\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.2 F720\nG92 E0\n\nM569 S0 E ; set spreadcycle mode for extruder\n\n;\n; Extrude purge line\n;\n{if filament_type[initial_tool]=="FLEX"}\nG1 E4 F2400 ; deretraction\n{else}\nG1 E2 F2400 ; deretraction\n{endif}\n\n; move right\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) + 32} E{32 * 0.15} F1000\n; move down\nG1 Y{(max(0, first_layer_print_min[1]) - 4) + 4 - 4.5 - 1.5} E{1.5 * 0.15} F1000\n; move left\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} E{32 * 0.30} F800\n\nG92 E0\nM221 S100 ; set flow to 100% +template_custom_gcode = +thumbnails = 16x16/QOI, 313x173/QOI, 440x240/QOI, 480x240/QOI, 640x480/PNG +thumbnails_format = PNG +toolchange_gcode = +travel_lift_before_obstacle = 0 +travel_max_lift = 1.5 +travel_ramping_lift = 1 +travel_slope = 1 +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0