pią, 27 maj 2022, 19:36:58 CEST

filament/DevilDesign PET-G.ini

@@ -1,5 +1,5 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-16 at 09:05:38 UTC
-bed_temperature = 60
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-27 at 10:01:08 UTC
+bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
 compatible_printers_condition = 
@@ -45,7 +45,7 @@ filament_unloading_speed = 90
 filament_unloading_speed_start = 100
 filament_vendor = (Unknown)
 filament_wipe = nil
-first_layer_bed_temperature = 60
+first_layer_bed_temperature = 85
 first_layer_temperature = 220
 full_fan_speed_layer = 5
 inherits = 
@@ -54,4 +54,4 @@ min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 15
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}24{else}45{endif} ; Filament gcode"
-temperature = 220
+temperature = 230

print/VASE 0.20mm @MK3.ini

@@ -0,0 +1,145 @@
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-27 at 16:19:27 UTC
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 0
+draft_shield = disabled
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.8
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 45
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 0%
+fill_pattern = gyroid
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0.0125
+infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 80
+inherits = 0.20mm QUALITY @MK3
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 200
+max_volumetric_speed = 0
+min_skirt_length = 4
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.2
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 80
+spiral_vase = 1
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 80%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 50
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thick_bridges = 0
+thin_walls = 0
+threads = 4
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+top_solid_layers = 0
+top_solid_min_thickness = 0.7
+travel_speed = 180
+travel_speed_z = 12
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0