2024.02.20 00:04

print/STRONG - 0.20mm.ini

@@ -1,4 +1,6 @@
-# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2023-04-04 at 11:49:40 UTC
+# generated by PrusaSlicer 2.7.1+linux-x64-GTK3 on 2024-02-19 at 21:48:29 UTC
+arc_fitting = disabled
+avoid_crossing_curled_overhangs = 0
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -11,19 +13,20 @@ bridge_speed = 25
 brim_separation = 0.1
 brim_type = outer_only
 brim_width = 0
-clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 0
 draft_shield = disabled
 elefant_foot_compensation = 0.2
-ensure_vertical_shell_thickness = 1
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 0
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 25
 external_perimeters_first = 0
 extra_perimeters = 1
+extra_perimeters_on_overhangs = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 45
 extrusion_width = 0.45
@@ -42,7 +45,7 @@ fuzzy_skin_thickness = 0.3
 gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 1
+gcode_label_objects = octoprint
 gcode_resolution = 0.0125
 gcode_substitutions = 
 infill_acceleration = 1000
@@ -52,7 +55,6 @@ infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.8
 infill_first = 0
-infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 80
 inherits = 0.20mm QUALITY @MK3
@@ -70,11 +72,16 @@ max_volumetric_speed = 0
 min_bead_width = 85%
 min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhang_speed_0 = 15
+overhang_speed_1 = 15
+overhang_speed_2 = 20
+overhang_speed_3 = 25
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
@@ -98,12 +105,14 @@ skirts = 1
 slice_closing_radius = 0.049
 slicing_mode = regular
 small_perimeter_speed = 25
+solid_infill_acceleration = 0
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
 solid_infill_speed = 80
 spiral_vase = 0
+staggered_inner_seams = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
@@ -130,14 +139,23 @@ support_material_synchronize_layers = 0
 support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 15%
 thick_bridges = 1
 thin_walls = 1
-threads = 24
 top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
+top_solid_infill_acceleration = 0
 top_solid_infill_speed = 40
 top_solid_layers = 5
 top_solid_min_thickness = 0.7
+travel_acceleration = 0
 travel_speed = 180
 travel_speed_z = 12
 wall_distribution_count = 1
@@ -147,6 +165,9 @@ wall_transition_length = 100%
 wipe_tower = 1
 wipe_tower_bridging = 10
 wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_extruder = 0
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60