From 66c53a9e9ac899c0515841cc279944015d5cbc25 Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Sat, 2 Apr 2022 00:38:24 +0200 Subject: [PATCH] sob, 2 kwi 2022, 00:38:24 CEST --- .../Devil Design PLA @ Tevo Tarantula.ini | 57 ++++++++++++++ printer/Tevo Tarantula Dual.ini | 78 +++++++++++++++++++ printer/Tevo Tarantula.ini | 16 ++-- 3 files changed, 143 insertions(+), 8 deletions(-) create mode 100644 filament/Devil Design PLA @ Tevo Tarantula.ini create mode 100644 printer/Tevo Tarantula Dual.ini diff --git a/filament/Devil Design PLA @ Tevo Tarantula.ini b/filament/Devil Design PLA @ Tevo Tarantula.ini new file mode 100644 index 0000000..6f2b305 --- /dev/null +++ b/filament/Devil Design PLA @ Tevo Tarantula.ini @@ -0,0 +1,57 @@ +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-31 at 20:03:57 UTC +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = "Tevo Tarantula";"Tevo Tarantula Dual";"Tevo Tarantula Mixing" +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF8000 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 20.99 +filament_density = 1.24 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 15 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_settings_id = "" +filament_soluble = 0 +filament_spool_weight = 250 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = Devil Design +filament_wipe = nil +first_layer_bed_temperature = 60 +first_layer_temperature = 230 +full_fan_speed_layer = 4 +inherits = +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 15 +slowdown_below_layer_time = 15 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +temperature = 230 diff --git a/printer/Tevo Tarantula Dual.ini b/printer/Tevo Tarantula Dual.ini new file mode 100644 index 0000000..070bfa2 --- /dev/null +++ b/printer/Tevo Tarantula Dual.ini @@ -0,0 +1,78 @@ +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-31 at 20:05:34 UTC +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,200x0,200x200,0x200 +before_layer_gcode = +between_objects_gcode = +color_change_gcode = M600 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = +default_print_profile = +deretract_speed = 0,0 +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n\nM104 S0 ; turn off hotend temperature\nM140 S40 ; set heatbed to 40C\n\nG28 X0 ; home X axis\nG1 Y200 ; move pirint bed to the front\n\nM84 ; disable motors\n +extra_loading_move = -2 +extruder_colour = ; +extruder_offset = 0x0,0x0 +gcode_flavor = marlin2 +high_current_on_filament_swap = 0 +host_type = octoprint +inherits = +layer_gcode = +machine_limits_usage = emit_to_gcode +machine_max_acceleration_e = 5000,5000 +machine_max_acceleration_extruding = 1250,1250 +machine_max_acceleration_retracting = 1250,1250 +machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_x = 1000,1000 +machine_max_acceleration_y = 1000,1000 +machine_max_acceleration_z = 500,200 +machine_max_feedrate_e = 100,100 +machine_max_feedrate_x = 200,200 +machine_max_feedrate_y = 200,200 +machine_max_feedrate_z = 12,12 +machine_max_jerk_e = 2.5,2.5 +machine_max_jerk_x = 8,8 +machine_max_jerk_y = 8,8 +machine_max_jerk_z = 0.2,0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_layer_height = 0,0 +max_print_height = 170 +min_layer_height = 0.07,0.07 +nozzle_diameter = 0.4,0.4 +parking_pos_retraction = 92 +pause_print_gcode = M601 +print_host = +printer_model = +printer_notes = +printer_settings_id = +printer_technology = FFF +printer_variant = +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 1 +retract_before_travel = 2,2 +retract_before_wipe = 0%,0% +retract_layer_change = 0,0 +retract_length = 0.8,0.8 +retract_length_toolchange = 10,10 +retract_lift = 0.4,0.4 +retract_lift_above = 0,0 +retract_lift_below = 0,0 +retract_restart_extra = 0,0 +retract_restart_extra_toolchange = 0,0 +retract_speed = 35,35 +silent_mode = 1 +single_extruder_multi_material = 1 +start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG28 ; home all axes\nG29 ; Bed level\nG1 X0 Y0 F5000; Move to 0,0\nG1 Z5 F5000 ; lift nozzle\n +template_custom_gcode = +thumbnails = +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1,1 +z_offset = 0 diff --git a/printer/Tevo Tarantula.ini b/printer/Tevo Tarantula.ini index 599ccc8..873b86f 100644 --- a/printer/Tevo Tarantula.ini +++ b/printer/Tevo Tarantula.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-30 at 21:50:46 UTC +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-31 at 16:49:58 UTC bed_custom_model = bed_custom_texture = bed_shape = 0x0,200x0,200x200,0x200 @@ -20,7 +20,7 @@ host_type = octoprint inherits = layer_gcode = machine_limits_usage = emit_to_gcode -machine_max_acceleration_e = 10000,5000 +machine_max_acceleration_e = 5000,5000 machine_max_acceleration_extruding = 1250,1250 machine_max_acceleration_retracting = 1250,1250 machine_max_acceleration_travel = 1500,1250 @@ -32,8 +32,8 @@ machine_max_feedrate_x = 200,200 machine_max_feedrate_y = 200,200 machine_max_feedrate_z = 12,12 machine_max_jerk_e = 2.5,2.5 -machine_max_jerk_x = 10,10 -machine_max_jerk_y = 10,10 +machine_max_jerk_x = 8,8 +machine_max_jerk_y = 8,8 machine_max_jerk_z = 0.2,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 @@ -56,14 +56,14 @@ remaining_times = 1 retract_before_travel = 2 retract_before_wipe = 0% retract_layer_change = 0 -retract_length = 2 +retract_length = 0.8 retract_length_toolchange = 10 -retract_lift = 0 +retract_lift = 0.4 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 -retract_speed = 40 +retract_speed = 35 silent_mode = 1 single_extruder_multi_material = 0 start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG28 ; home all axes\nG29 ; Bed level\nG1 X0 Y0 F5000; Move to 0,0\nG1 Z5 F5000 ; lift nozzle\n @@ -74,5 +74,5 @@ use_firmware_retraction = 0 use_relative_e_distances = 0 use_volumetric_e = 0 variable_layer_height = 1 -wipe = 0 +wipe = 1 z_offset = 0