pon, 4 kwi 2022, 22:34:38 CEST

filament/Fiberflex 30D @ Tevo Tarantula.ini

@@ -0,0 +1,57 @@
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-04-04 at 20:19:46 UTC
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = "Tevo Tarantula";"Tevo Tarantula Dual"
+compatible_printers_condition = nozzle_diameter[0]>0.35
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 4
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #F9F06B
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 32.99
+filament_density = 1.21
+filament_deretract_speed = 15
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 2.5
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = 3
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 0
+filament_retract_lift = 0
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = FLEX
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = SainSmart
+filament_wipe = 0
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+full_fan_speed_layer = 6
+inherits = 
+max_fan_speed = 70
+min_fan_speed = 50
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K0"
+temperature = 210

filament/Fiberflex 30D.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-13 at 19:55:49 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-04-04 at 16:34:09 UTC
 bed_temperature = 50
 bridge_fan_speed = 100
 compatible_printers = 
@@ -48,7 +48,7 @@ filament_wipe = 0
 first_layer_bed_temperature = 50
 first_layer_temperature = 210
 full_fan_speed_layer = 6
-inherits = SainSmart TPU
+inherits = 
 max_fan_speed = 70
 min_fan_speed = 50
 min_print_speed = 15

print/QUALITY - 0.20mm @ TevoTarantula.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-04-02 at 11:44:28 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-04-04 at 11:29:47 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -132,7 +132,7 @@ top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 40
 top_solid_layers = 5
 top_solid_min_thickness = 0.7
-travel_speed = 180
+travel_speed = 120
 travel_speed_z = 12
 wipe_tower = 1
 wipe_tower_bridging = 10

print/TPU - 0.20mm @ TevoTarantula.ini

@@ -0,0 +1,145 @@
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-04-04 at 16:39:27 UTC
+avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 15
+brim_separation = 0.1
+brim_type = outer_only
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 0
+draft_shield = disabled
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 15
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 45
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 15
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0.0125
+infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 20
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 200
+max_volumetric_speed = 0
+min_skirt_length = 4
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 20
+perimeters = 2
+post_process = 
+print_settings_id = QUALITY - 0.20mm
+raft_contact_distance = 0.2
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 5
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 80%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 20
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 50
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thick_bridges = 1
+thin_walls = 1
+threads = 24
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 15
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_speed = 120
+travel_speed_z = 12
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 110
+wipe_tower_y = 150
+xy_size_compensation = 0

printer/Tevo Tarantula Dual.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-04-04 at 07:15:43 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-04-04 at 11:23:51 UTC
 bed_custom_model = 
 bed_custom_texture = 
 bed_shape = 0x0,200x0,200x200,0x200
@@ -24,12 +24,12 @@ machine_max_acceleration_e = 5000,5000
 machine_max_acceleration_extruding = 1250,1250
 machine_max_acceleration_retracting = 1250,1250
 machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 1000,1000
-machine_max_acceleration_y = 1000,1000
+machine_max_acceleration_x = 800,800
+machine_max_acceleration_y = 800,800
 machine_max_acceleration_z = 500,200
 machine_max_feedrate_e = 80,80
 machine_max_feedrate_x = 200,200
-machine_max_feedrate_y = 200,200
+machine_max_feedrate_y = 120,120
 machine_max_feedrate_z = 12,12
 machine_max_jerk_e = 2.5,2.5
 machine_max_jerk_x = 8,8