From 6a81f16cc6027c9ada29c04a49eedee8238e67b5 Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Tue, 1 Mar 2022 16:09:42 +0100 Subject: [PATCH] wto, 1 mar 2022, 16:09:42 CET --- print/QUALITY - 0.20mm.ini | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/print/QUALITY - 0.20mm.ini b/print/QUALITY - 0.20mm.ini index c4ab62a..1cb97f0 100644 --- a/print/QUALITY - 0.20mm.ini +++ b/print/QUALITY - 0.20mm.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-19 at 01:15:09 UTC +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-01 at 09:40:55 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic @@ -8,7 +8,7 @@ bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.95 bridge_speed = 30 -brim_separation = 0 +brim_separation = 0.1 brim_type = outer_only brim_width = 0 clip_multipart_objects = 1 @@ -18,7 +18,7 @@ complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 draft_shield = disabled -elefant_foot_compensation = 0 +elefant_foot_compensation = 0.2 ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 25 @@ -30,7 +30,7 @@ extrusion_width = 0.45 fill_angle = 45 fill_density = 10% fill_pattern = rectilinear -first_layer_acceleration = 1000 +first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 @@ -44,14 +44,14 @@ gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 1 gcode_resolution = 0.0125 -infill_acceleration = 1250 -infill_anchor = 600% +infill_acceleration = 1000 +infill_anchor = 2.5 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 -infill_only_where_needed = 0 +infill_only_where_needed = 1 infill_overlap = 25% infill_speed = 80 inherits = @@ -70,15 +70,15 @@ notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode -overhangs = 0 +overhangs = 1 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 45 perimeters = 2 post_process = -print_settings_id = -raft_contact_distance = 0.1 +print_settings_id = QUALITY - 0.20mm +raft_contact_distance = 0.2 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 @@ -99,14 +99,14 @@ solid_infill_extrusion_width = 0.45 solid_infill_speed = 80 spiral_vase = 0 standby_temperature_delta = -5 -support_material = 0 +support_material = 1 support_material_angle = 0 -support_material_auto = 1 +support_material_auto = 0 support_material_bottom_contact_distance = 0 -support_material_bottom_interface_layers = -1 +support_material_bottom_interface_layers = 0 support_material_buildplate_only = 0 support_material_closing_radius = 2 -support_material_contact_distance = 0.1 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 @@ -115,7 +115,7 @@ support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% +support_material_interface_speed = 80% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 @@ -123,17 +123,17 @@ support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 55 support_material_with_sheath = 0 -support_material_xy_spacing = 50% +support_material_xy_spacing = 60% thick_bridges = 1 thin_walls = 0 -threads = 24 +threads = 4 top_fill_pattern = monotonic top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 top_solid_layers = 5 top_solid_min_thickness = 0 travel_speed = 180 -travel_speed_z = 0 +travel_speed_z = 12 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_brim_width = 2