wto, 1 mar 2022, 16:09:42 CET

print/QUALITY - 0.20mm.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-19 at 01:15:09 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-01 at 09:40:55 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -8,7 +8,7 @@ bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
 bridge_speed = 30
-brim_separation = 0
+brim_separation = 0.1
 brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
@@ -18,7 +18,7 @@ complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
 draft_shield = disabled
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 25
@@ -30,7 +30,7 @@ extrusion_width = 0.45
 fill_angle = 45
 fill_density = 10%
 fill_pattern = rectilinear
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
 first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -44,14 +44,14 @@ gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
 gcode_resolution = 0.0125
-infill_acceleration = 1250
-infill_anchor = 600%
+infill_acceleration = 1000
+infill_anchor = 2.5
 infill_anchor_max = 50
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
-infill_only_where_needed = 0
+infill_only_where_needed = 1
 infill_overlap = 25%
 infill_speed = 80
 inherits = 
@@ -70,15 +70,15 @@ notes =
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhangs = 0
+overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 45
 perimeters = 2
 post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
+print_settings_id = QUALITY - 0.20mm
+raft_contact_distance = 0.2
 raft_expansion = 1.5
 raft_first_layer_density = 90%
 raft_first_layer_expansion = 3
@@ -99,14 +99,14 @@ solid_infill_extrusion_width = 0.45
 solid_infill_speed = 80
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 0
+support_material = 1
 support_material_angle = 0
-support_material_auto = 1
+support_material_auto = 0
 support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 0
 support_material_closing_radius = 2
-support_material_contact_distance = 0.1
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
@@ -115,7 +115,7 @@ support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
@@ -123,17 +123,17 @@ support_material_style = grid
 support_material_synchronize_layers = 0
 support_material_threshold = 55
 support_material_with_sheath = 0
-support_material_xy_spacing = 50%
+support_material_xy_spacing = 60%
 thick_bridges = 1
 thin_walls = 0
-threads = 24
+threads = 4
 top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 40
 top_solid_layers = 5
 top_solid_min_thickness = 0
 travel_speed = 180
-travel_speed_z = 0
+travel_speed_z = 12
 wipe_tower = 1
 wipe_tower_bridging = 10
 wipe_tower_brim_width = 2