diff --git a/print/QUALITY - 0.20mm.ini b/print/QUALITY - 0.20mm.ini
index b10db27..308eed7 100644
--- a/print/QUALITY - 0.20mm.ini	
+++ b/print/QUALITY - 0.20mm.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-12 at 12:50:11 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-19 at 19:39:31 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -13,7 +13,7 @@ brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]==0.4
+compatible_printers_condition = 
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 0
@@ -54,7 +54,7 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 80
-inherits = 0.20mm QUALITY @MK3
+inherits = 
 interface_shells = 0
 ironing = 0
 ironing_flowrate = 15%
diff --git a/printer/Tevo Tarantula.ini b/printer/Tevo Tarantula.ini
index 9afafbe..26e911b 100644
--- a/printer/Tevo Tarantula.ini	
+++ b/printer/Tevo Tarantula.ini	
@@ -1,7 +1,7 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-16 at 23:48:56 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-19 at 20:40:23 UTC
 bed_custom_model = 
 bed_custom_texture = 
-bed_shape = 0x0,200x0,200x200,0x200
+bed_shape = 0x0,180x0,180x180,0x180
 before_layer_gcode = 
 between_objects_gcode = 
 color_change_gcode = M600
@@ -66,7 +66,7 @@ retract_restart_extra_toolchange = 0
 retract_speed = 40
 silent_mode = 1
 single_extruder_multi_material = 0
-start_gcode = M16 "Tevo Tarantula"\nG28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n
+start_gcode = M16 "Tevo Tarantula"\nG28 ; home all axes\nG29 ; Bed level\nG1 X0 Y0 F5000; Move to 0,0\nG1 Z5 F5000 ; lift nozzle\n\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n
 template_custom_gcode = 
 thumbnails = 
 toolchange_gcode =