From 857e5678fc46f9e98f345b816009d97ab5fea9f6 Mon Sep 17 00:00:00 2001
From: Przemek Grondek <przemek@grondek.pl>
Date: Thu, 9 Sep 2021 10:29:59 +0200
Subject: [PATCH] czw, 9 wrz 2021, 10:29:59 CEST

---
 print/QUALITY - 0.15mm - LEGO.ini | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/print/QUALITY - 0.15mm - LEGO.ini b/print/QUALITY - 0.15mm - LEGO.ini
index 6551851..aff344f 100644
--- a/print/QUALITY - 0.15mm - LEGO.ini	
+++ b/print/QUALITY - 0.15mm - LEGO.ini	
@@ -1,5 +1,6 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-05 at 09:45:29 UTC
+# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-09-09 at 08:29:57 UTC
 avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
 bottom_solid_min_thickness = 0
@@ -35,6 +36,8 @@ gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 600%
+infill_anchor_max = 50
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 80
 inherits = 
 interface_shells = 0
+ironing = 1
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.15
 max_print_speed = 200
 max_volumetric_speed = 0
@@ -97,7 +105,7 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 1
-threads = 4
+threads = 24
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 40