From 8769d4be0e836e773616e96ceeda4ff241f66116 Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Mon, 9 May 2022 00:39:21 +0200 Subject: [PATCH] pon, 9 maj 2022, 00:39:21 CEST --- print/QUALITY 0.6mm @1.0 nozzle.ini | 146 ++++++++++++++++++++++++++++ print/TEST 0.75mm @1.0 nozzle.ini | 4 +- print/VASE 0.80mm @1.0 nozzle.ini | 146 ++++++++++++++++++++++++++++ 3 files changed, 294 insertions(+), 2 deletions(-) create mode 100644 print/QUALITY 0.6mm @1.0 nozzle.ini create mode 100644 print/VASE 0.80mm @1.0 nozzle.ini diff --git a/print/QUALITY 0.6mm @1.0 nozzle.ini b/print/QUALITY 0.6mm @1.0 nozzle.ini new file mode 100644 index 0000000..6a23d0e --- /dev/null +++ b/print/QUALITY 0.6mm @1.0 nozzle.ini @@ -0,0 +1,146 @@ +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-05-08 at 12:51:35 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 22 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.1 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 1.1 +fill_angle = 45 +fill_density = 10% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1.1 +first_layer_height = 0.3 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 30 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 50 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.6 +max_print_speed = 50 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 1.1 +perimeter_speed = 35 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = rear +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1 +solid_infill_speed = 45 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 1 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.9 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 40 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1 +top_solid_infill_speed = 35 +top_solid_layers = 4 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/print/TEST 0.75mm @1.0 nozzle.ini b/print/TEST 0.75mm @1.0 nozzle.ini index 6852d49..93191e0 100644 --- a/print/TEST 0.75mm @1.0 nozzle.ini +++ b/print/TEST 0.75mm @1.0 nozzle.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-05-06 at 20:19:10 UTC +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-05-06 at 21:23:32 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic @@ -85,7 +85,7 @@ raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 -seam_position = nearest +seam_position = rear single_extruder_multi_material_priming = 0 skirt_distance = 3 skirt_height = 2 diff --git a/print/VASE 0.80mm @1.0 nozzle.ini b/print/VASE 0.80mm @1.0 nozzle.ini new file mode 100644 index 0000000..1f4f0f7 --- /dev/null +++ b/print/VASE 0.80mm @1.0 nozzle.ini @@ -0,0 +1,146 @@ +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-05-06 at 21:52:22 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 22 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 2 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 2 +fill_angle = 45 +fill_density = 0% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1 +first_layer_height = 0.3 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 30 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 50 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.8 +max_print_speed = 50 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 2 +perimeter_speed = 35 +perimeters = 1 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = rear +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1 +solid_infill_speed = 45 +spiral_vase = 1 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 1 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.9 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 40 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1 +top_solid_infill_speed = 35 +top_solid_layers = 0 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0