pon, 9 maj 2022, 00:39:21 CEST

print/QUALITY 0.6mm @1.0 nozzle.ini

@@ -0,0 +1,146 @@
+# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-05-08 at 12:51:35 UTC
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.8
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.9
+bridge_speed = 22
+brim_separation = 0.1
+brim_type = outer_only
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1 and num_extruders==1
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 0
+draft_shield = disabled
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1.1
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 45
+extrusion_width = 1.1
+fill_angle = 45
+fill_density = 10%
+fill_pattern = gyroid
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 1.1
+first_layer_height = 0.3
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 1
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 30%
+infill_speed = 50
+inherits = 0.40mm QUALITY @0.8 nozzle
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.6
+max_print_speed = 50
+max_volumetric_speed = 0
+min_skirt_length = 4
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.1
+perimeter_speed = 35
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.2
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+seam_position = rear
+single_extruder_multi_material_priming = 0
+skirt_distance = 3
+skirt_height = 2
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 45
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
+support_material_buildplate_only = 1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.25
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.9
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.4
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 40
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 50
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thick_bridges = 1
+thin_walls = 0
+threads = 24
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 35
+top_solid_layers = 4
+top_solid_min_thickness = 1.2
+travel_speed = 180
+travel_speed_z = 12
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0

print/TEST 0.75mm @1.0 nozzle.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-05-06 at 20:19:10 UTC
+# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-05-06 at 21:23:32 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -85,7 +85,7 @@ raft_first_layer_density = 90%
 raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
-seam_position = nearest
+seam_position = rear
 single_extruder_multi_material_priming = 0
 skirt_distance = 3
 skirt_height = 2

print/VASE 0.80mm @1.0 nozzle.ini

@@ -0,0 +1,146 @@
+# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-05-06 at 21:52:22 UTC
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.8
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.9
+bridge_speed = 22
+brim_separation = 0.1
+brim_type = outer_only
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1 and num_extruders==1
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 0
+draft_shield = disabled
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 2
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 45
+extrusion_width = 2
+fill_angle = 45
+fill_density = 0%
+fill_pattern = gyroid
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 1
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 30%
+infill_speed = 50
+inherits = 0.40mm QUALITY @0.8 nozzle
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.8
+max_print_speed = 50
+max_volumetric_speed = 0
+min_skirt_length = 4
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 2
+perimeter_speed = 35
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.2
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+seam_position = rear
+single_extruder_multi_material_priming = 0
+skirt_distance = 3
+skirt_height = 2
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 45
+spiral_vase = 1
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
+support_material_buildplate_only = 1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.25
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.9
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.4
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 40
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 50
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thick_bridges = 1
+thin_walls = 0
+threads = 24
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 35
+top_solid_layers = 0
+top_solid_min_thickness = 1.2
+travel_speed = 180
+travel_speed_z = 12
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0