diff --git a/filament/F3D - TPU.ini b/filament/F3D TPU.ini similarity index 70% rename from filament/F3D - TPU.ini rename to filament/F3D TPU.ini index 524ad2a..f1f0467 100644 --- a/filament/F3D - TPU.ini +++ b/filament/F3D TPU.ini @@ -1,55 +1,57 @@ -# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-18 at 20:10:26 UTC +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-11 at 22:28:16 UTC bed_temperature = 50 -bridge_fan_speed = 80 +bridge_fan_speed = 100 compatible_printers = compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) compatible_prints = -compatible_prints_condition = notes =~/.*PROFILE_TPU.*/ +compatible_prints_condition = cooling = 1 -disable_fan_first_layers = 3 +disable_fan_first_layers = 4 end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1.15 +extrusion_multiplier = 1.1 fan_always_on = 1 fan_below_layer_time = 100 -filament_colour = #000000 +filament_colour = #008000 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 -filament_cost = 136 -filament_density = 1.22 +filament_cost = 32.99 +filament_density = 1.21 filament_deretract_speed = 25 filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 -filament_max_volumetric_speed = 1.2 +filament_max_volumetric_speed = 2.5 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" -filament_retract_before_travel = nil +filament_retract_before_travel = 3 filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = 0 -filament_retract_lift = nil +filament_retract_lift = 0 filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 +filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = FLEX filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 -filament_vendor = Generic +filament_vendor = SainSmart filament_wipe = 0 first_layer_bed_temperature = 50 -first_layer_temperature = 240 -inherits = Generic FLEX -max_fan_speed = 50 -min_fan_speed = 10 -min_print_speed = 10 -slowdown_below_layer_time = 20 +first_layer_temperature = 230 +full_fan_speed_layer = 6 +inherits = SainSmart TPU +max_fan_speed = 80 +min_fan_speed = 80 +min_print_speed = 15 +slowdown_below_layer_time = 10 start_filament_gcode = "M900 K0" -temperature = 240 +temperature = 230 diff --git a/filament/Fiberflex 30D.ini b/filament/Fiberflex 30D.ini new file mode 100644 index 0000000..565f4bb --- /dev/null +++ b/filament/Fiberflex 30D.ini @@ -0,0 +1,57 @@ +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-13 at 19:55:49 UTC +bed_temperature = 50 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 4 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.05 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #F9F06B +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 32.99 +filament_density = 1.21 +filament_deretract_speed = 25 +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 2.5 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = 3 +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = 1 +filament_retract_lift = 0 +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_settings_id = "" +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_type = FLEX +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = SainSmart +filament_wipe = 0 +first_layer_bed_temperature = 50 +first_layer_temperature = 210 +full_fan_speed_layer = 6 +inherits = SainSmart TPU +max_fan_speed = 70 +min_fan_speed = 50 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K0" +temperature = 210 diff --git a/print/QUALITY - 0.20mm - TPU.ini b/print/0.20mm QUALITY @TPU.ini similarity index 62% rename from print/QUALITY - 0.20mm - TPU.ini rename to print/0.20mm QUALITY @TPU.ini index 074f74d..dfee0a6 100644 --- a/print/QUALITY - 0.20mm - TPU.ini +++ b/print/0.20mm QUALITY @TPU.ini @@ -1,43 +1,52 @@ -# generated by PrusaSlicer 2.3.0+linux-x64-GTK3 on 2021-05-03 at 14:23:00 UTC +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-11 at 22:28:20 UTC avoid_crossing_perimeters = 1 avoid_crossing_perimeters_max_detour = 0 -bottom_fill_pattern = rectilinear -bottom_solid_layers = 3 -bottom_solid_min_thickness = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 4 +bottom_solid_min_thickness = 0.5 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.95 bridge_speed = 15 +brim_separation = 0.1 +brim_type = outer_only brim_width = 0 clip_multipart_objects = 1 compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 1000 -dont_support_bridges = 1 -draft_shield = 0 -elefant_foot_compensation = 0 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 15 external_perimeters_first = 0 extra_perimeters = 0 -extruder_clearance_height = 25 +extruder_clearance_height = 20 extruder_clearance_radius = 45 extrusion_width = 0.45 fill_angle = 45 -fill_density = 10% -fill_pattern = rectilinear -first_layer_acceleration = 1000 +fill_density = 15% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 -first_layer_speed = 15 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 gap_fill_speed = 15 gcode_comments = 0 gcode_label_objects = 1 -infill_acceleration = 1250 -infill_anchor = 600% -infill_anchor_max = 50 +gcode_resolution = 0.0125 +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 12 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 @@ -45,7 +54,7 @@ infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% infill_speed = 20 -inherits = +inherits = 0.20mm QUALITY @MK3 interface_shells = 0 ironing = 0 ironing_flowrate = 15% @@ -56,11 +65,12 @@ layer_height = 0.2 max_print_speed = 200 max_volumetric_speed = 0 min_skirt_length = 4 -notes = PROFILE_TPU +mmu_segmented_region_max_width = 0 +notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode -overhangs = 0 +overhangs = 1 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 @@ -68,52 +78,65 @@ perimeter_speed = 15 perimeters = 2 post_process = print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 -seam_position = aligned +seam_position = nearest single_extruder_multi_material_priming = 0 -skirt_distance = 3 -skirt_height = 1 -skirts = 2 +skirt_distance = 5 +skirt_height = 3 +skirts = 1 slice_closing_radius = 0.049 +slicing_mode = regular small_perimeter_speed = 15 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 -solid_infill_speed = 15 +solid_infill_speed = 20 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 support_material_buildplate_only = 0 -support_material_contact_distance = 0.1 +support_material_closing_radius = 2 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% +support_material_interface_speed = 80% support_material_pattern = rectilinear support_material_spacing = 2 -support_material_speed = 0 +support_material_speed = 40 +support_material_style = grid support_material_synchronize_layers = 0 -support_material_threshold = 55 +support_material_threshold = 50 support_material_with_sheath = 0 -support_material_xy_spacing = 50% +support_material_xy_spacing = 60% +thick_bridges = 0 thin_walls = 0 threads = 24 -top_fill_pattern = rectilinear +top_fill_pattern = monotonic top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 15 -top_solid_layers = 3 -top_solid_min_thickness = 0 +top_solid_infill_speed = 20 +top_solid_layers = 6 +top_solid_min_thickness = 0.7 travel_speed = 180 +travel_speed_z = 12 wipe_tower = 1 wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 diff --git a/print/QUALITY - 0.25mm - TPU.ini b/print/QUALITY - 0.25mm - TPU.ini deleted file mode 100644 index a146243..0000000 --- a/print/QUALITY - 0.25mm - TPU.ini +++ /dev/null @@ -1,114 +0,0 @@ -# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-18 at 14:54:12 UTC -avoid_crossing_perimeters = 1 -bottom_fill_pattern = rectilinear -bottom_solid_layers = 3 -bottom_solid_min_thickness = 0 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 15 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -draft_shield = 0 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 15 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 25 -extruder_clearance_radius = 45 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 10% -fill_pattern = rectilinear -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 15 -gap_fill_speed = 15 -gcode_comments = 0 -gcode_label_objects = 1 -infill_acceleration = 1250 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 20 -inherits = -interface_shells = 0 -layer_height = 0.25 -max_print_speed = 200 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = PROFILE_TPU -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 15 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = aligned -single_extruder_multi_material_priming = 0 -skirt_distance = 3 -skirt_height = 1 -skirts = 2 -slice_closing_radius = 0.049 -small_perimeter_speed = 15 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 15 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_auto = 1 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.1 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 0 -support_material_synchronize_layers = 0 -support_material_threshold = 55 -support_material_with_sheath = 0 -support_material_xy_spacing = 50% -thin_walls = 0 -threads = 4 -top_fill_pattern = rectilinear -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 15 -top_solid_layers = 3 -top_solid_min_thickness = 0 -travel_speed = 180 -wipe_tower = 1 -wipe_tower_bridging = 10 -wipe_tower_no_sparse_layers = 0 -wipe_tower_rotation_angle = 0 -wipe_tower_width = 60 -wipe_tower_x = 170 -wipe_tower_y = 125 -xy_size_compensation = 0