From 9938b99512e67894004caf81d586f52c08ead8d8 Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Wed, 14 Dec 2022 19:36:13 +0100 Subject: [PATCH] 2022.12.14 19:36 --- printer/Original Prusa i3 MK3S & MK3S+ Autoprint.ini | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/printer/Original Prusa i3 MK3S & MK3S+ Autoprint.ini b/printer/Original Prusa i3 MK3S & MK3S+ Autoprint.ini index bb45396..3ce9463 100644 --- a/printer/Original Prusa i3 MK3S & MK3S+ Autoprint.ini +++ b/printer/Original Prusa i3 MK3S & MK3S+ Autoprint.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2022-12-14 at 14:56:44 UTC +# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2022-12-14 at 16:48:36 UTC bed_custom_model = bed_custom_texture = bed_shape = 0x0,250x0,250x210,0x210 @@ -66,7 +66,7 @@ retract_restart_extra_toolchange = 0 retract_speed = 35 silent_mode = 1 single_extruder_multi_material = 0 -start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\n; M115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; No intro line\nG1 Z0.3 F720\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\n; M115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; No intro line\nG1 Z0.3 F720\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\nG1 Z0.2 F720\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} template_custom_gcode = thumbnails = 160x120 thumbnails_format = PNG