From 9dd4e9317fa3e5de96c0b4093e0d0baa9c60b6b1 Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Wed, 5 Apr 2023 00:57:43 +0200 Subject: [PATCH] 2023.04.05 00:57 --- print/STRONG - 0.20mm.ini | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/print/STRONG - 0.20mm.ini b/print/STRONG - 0.20mm.ini index 8545fb3..d112c75 100644 --- a/print/STRONG - 0.20mm.ini +++ b/print/STRONG - 0.20mm.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-11 at 23:24:43 UTC +# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2023-04-04 at 11:49:40 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic @@ -29,7 +29,7 @@ extruder_clearance_radius = 45 extrusion_width = 0.45 fill_angle = 45 fill_density = 25% -fill_pattern = gyroid +fill_pattern = cubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.42 @@ -44,6 +44,7 @@ gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 1 gcode_resolution = 0.0125 +gcode_substitutions = infill_acceleration = 1000 infill_anchor = 2.5 infill_anchor_max = 12 @@ -63,7 +64,11 @@ ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 200 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 +min_bead_width = 85% +min_feature_size = 25% min_skirt_length = 4 mmu_segmented_region_max_width = 0 notes = @@ -74,6 +79,7 @@ overhangs = 1 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 +perimeter_generator = arachne perimeter_speed = 45 perimeters = 5 post_process = @@ -134,6 +140,10 @@ top_solid_layers = 5 top_solid_min_thickness = 0.7 travel_speed = 180 travel_speed_z = 12 +wall_distribution_count = 1 +wall_transition_angle = 10 +wall_transition_filter_deviation = 25% +wall_transition_length = 100% wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_brim_width = 2