diff --git a/filament/Fiberlogy Easy PLA @ MMU2S.ini b/filament/Fiberlogy Easy PLA @ MMU2S.ini
index c59597e..d8f8d5c 100644
--- a/filament/Fiberlogy Easy PLA @ MMU2S.ini	
+++ b/filament/Fiberlogy Easy PLA @ MMU2S.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.6.0+linux-x64-GTK3 on 2023-08-22 at 13:33:42 UTC
+# generated by PrusaSlicer 2.6.0+linux-x64-GTK2 on 2023-08-21 at 21:27:49 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
diff --git a/filament/Prusament PLA_ @MMU2.ini b/filament/Prusament PLA_ @MMU2.ini
new file mode 100644
index 0000000..4010137
--- /dev/null
+++ b/filament/Prusament PLA_ @MMU2.ini	
@@ -0,0 +1,63 @@
+# generated by PrusaSlicer 2.6.0+linux-x64-GTK2 on 2023-08-21 at 20:30:52 UTC
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+enable_dynamic_fan_speeds = 0
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF8000
+filament_cooling_final_speed = 2
+filament_cooling_initial_speed = 3
+filament_cooling_moves = 1
+filament_cost = 36.29
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 15
+filament_loading_speed = 14
+filament_loading_speed_start = 19
+filament_max_volumetric_speed = 12
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.58602 6.74731 7.12366 7.60753 7.95699 8.19893 8.65591 9.35484 10 10.1613 9.46237 8.25269 7.52688 7.5| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 201
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 12
+filament_unloading_speed = 20
+filament_unloading_speed_start = 100
+filament_vendor = Prusa Polymers
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+full_fan_speed_layer = 4
+idle_temperature = nil
+inherits = Prusament PLA @MMU2
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 15
+overhang_fan_speed_0 = 0
+overhang_fan_speed_1 = 0
+overhang_fan_speed_2 = 0
+overhang_fan_speed_3 = 0
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
+temperature = 205