From abaf852b0390e00a838335690b272cb3e930937b Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Thu, 14 Jul 2022 21:19:11 +0200 Subject: [PATCH] Add missing files --- filament/Devil Design PLA @ 0.25 mm.ini | 57 +++++++ filament/Fiberlogy - Fiber Wood.ini | 8 +- print/DETAIL 0.20mm @MK3.ini | 2 +- print/DETAIL TEST 0.10mm @0.25 nozzle MK3.ini | 146 ++++++++++++++++++ print/PRINT 1.00mm @1.4 nozzle.ini | 146 ++++++++++++++++++ print/QUALITY 0.30mm @1.4 nozzle.ini | 146 ++++++++++++++++++ print/QUALITY 0.40mm @1.0 nozzle.ini | 5 +- print/QUALITY 0.40mm @1.4 nozzle.ini | 146 ++++++++++++++++++ print/TEST 1.20mm @1.4 nozzle.ini | 146 ++++++++++++++++++ print/WOOD 0.30mm @1.4 nozzle.ini | 146 ++++++++++++++++++ ...ginal Prusa i3 MK3S & MK3S+ 1.4 nozzle.ini | 78 ++++++++++ 11 files changed, 1019 insertions(+), 7 deletions(-) create mode 100644 filament/Devil Design PLA @ 0.25 mm.ini create mode 100644 print/DETAIL TEST 0.10mm @0.25 nozzle MK3.ini create mode 100644 print/PRINT 1.00mm @1.4 nozzle.ini create mode 100644 print/QUALITY 0.30mm @1.4 nozzle.ini create mode 100644 print/QUALITY 0.40mm @1.4 nozzle.ini create mode 100644 print/TEST 1.20mm @1.4 nozzle.ini create mode 100644 print/WOOD 0.30mm @1.4 nozzle.ini create mode 100644 printer/Original Prusa i3 MK3S & MK3S+ 1.4 nozzle.ini diff --git a/filament/Devil Design PLA @ 0.25 mm.ini b/filament/Devil Design PLA @ 0.25 mm.ini new file mode 100644 index 0000000..9909a36 --- /dev/null +++ b/filament/Devil Design PLA @ 0.25 mm.ini @@ -0,0 +1,57 @@ +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-06-30 at 00:43:17 UTC +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF8000 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 20.99 +filament_density = 1.24 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 15 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_settings_id = "" +filament_soluble = 0 +filament_spool_weight = 250 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = Devil Design +filament_wipe = nil +first_layer_bed_temperature = 60 +first_layer_temperature = 230 +full_fan_speed_layer = 4 +inherits = Devil Design PLA +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 15 +slowdown_below_layer_time = 15 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +temperature = 220 diff --git a/filament/Fiberlogy - Fiber Wood.ini b/filament/Fiberlogy - Fiber Wood.ini index eb4fb6e..530ec9f 100644 --- a/filament/Fiberlogy - Fiber Wood.ini +++ b/filament/Fiberlogy - Fiber Wood.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-12-15 at 18:20:12 UTC +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-07-06 at 10:13:36 UTC bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -8,7 +8,7 @@ compatible_prints_condition = cooling = 1 disable_fan_first_layers = 1 end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 0.9 +extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #B59B83 @@ -22,7 +22,7 @@ filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 -filament_max_volumetric_speed = 15 +filament_max_volumetric_speed = 40 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" @@ -50,7 +50,7 @@ first_layer_temperature = 200 full_fan_speed_layer = 4 inherits = Prusa PLA max_fan_speed = 100 -min_fan_speed = 100 +min_fan_speed = 70 min_print_speed = 25 slowdown_below_layer_time = 15 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" diff --git a/print/DETAIL 0.20mm @MK3.ini b/print/DETAIL 0.20mm @MK3.ini index 48d5588..d580ecb 100644 --- a/print/DETAIL 0.20mm @MK3.ini +++ b/print/DETAIL 0.20mm @MK3.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-12 at 12:32:56 UTC +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-05-15 at 09:01:20 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic diff --git a/print/DETAIL TEST 0.10mm @0.25 nozzle MK3.ini b/print/DETAIL TEST 0.10mm @0.25 nozzle MK3.ini new file mode 100644 index 0000000..392ec1b --- /dev/null +++ b/print/DETAIL TEST 0.10mm @0.25 nozzle MK3.ini @@ -0,0 +1,146 @@ +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-07-01 at 09:26:56 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 7 +bottom_solid_min_thickness = 0.5 +bridge_acceleration = 500 +bridge_angle = 0 +bridge_flow_ratio = 1 +bridge_speed = 20 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 0.25 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 0.25 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 500 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 0.3 +first_layer_height = 0.2 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 20 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 12 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.25 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 20 +inherits = 0.10mm DETAIL @0.25 nozzle MK3 +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.1 +max_print_speed = 80 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 1 +perimeter_acceleration = 500 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.25 +perimeter_speed = 20 +perimeters = 3 +post_process = +print_settings_id = +raft_contact_distance = 0.07 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 15 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.25 +solid_infill_speed = 20 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.1 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.25 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 0 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.15 +support_material_interface_speed = 80% +support_material_pattern = rectilinear +support_material_spacing = 1 +support_material_speed = 20 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 150% +thick_bridges = 0 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.25 +top_solid_infill_speed = 20 +top_solid_layers = 9 +top_solid_min_thickness = 0.7 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 6 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 125 +xy_size_compensation = 0 diff --git a/print/PRINT 1.00mm @1.4 nozzle.ini b/print/PRINT 1.00mm @1.4 nozzle.ini new file mode 100644 index 0000000..fbc8852 --- /dev/null +++ b/print/PRINT 1.00mm @1.4 nozzle.ini @@ -0,0 +1,146 @@ +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-07-05 at 20:34:54 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 22 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1.4 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.5 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 1.5 +fill_angle = 45 +fill_density = 10% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1.5 +first_layer_height = 0.3 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 25 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1.5 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 35 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 1 +max_print_speed = 50 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 1.5 +perimeter_speed = 30 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = rear +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1.5 +solid_infill_speed = 35 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.7 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 35 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1.4 +top_solid_infill_speed = 30 +top_solid_layers = 3 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/print/QUALITY 0.30mm @1.4 nozzle.ini b/print/QUALITY 0.30mm @1.4 nozzle.ini new file mode 100644 index 0000000..da3baa7 --- /dev/null +++ b/print/QUALITY 0.30mm @1.4 nozzle.ini @@ -0,0 +1,146 @@ +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-07-06 at 07:55:13 UTC +avoid_crossing_perimeters = 1 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 22 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1.4 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.5 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 1.5 +fill_angle = 45 +fill_density = 15% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1.5 +first_layer_height = 0.3 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 30 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1.5 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 50 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.3 +max_print_speed = 50 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 1.5 +perimeter_speed = 35 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1.5 +solid_infill_speed = 45 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.7 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 40 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 1 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1.4 +top_solid_infill_speed = 35 +top_solid_layers = 4 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/print/QUALITY 0.40mm @1.0 nozzle.ini b/print/QUALITY 0.40mm @1.0 nozzle.ini index 4a06914..b4dcbc5 100644 --- a/print/QUALITY 0.40mm @1.0 nozzle.ini +++ b/print/QUALITY 0.40mm @1.0 nozzle.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-06 at 20:10:26 UTC +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-05-09 at 22:10:04 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic @@ -28,7 +28,7 @@ extruder_clearance_height = 20 extruder_clearance_radius = 45 extrusion_width = 1.1 fill_angle = 45 -fill_density = 0% +fill_density = 10% fill_pattern = gyroid first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 @@ -44,6 +44,7 @@ gap_fill_speed = 30 gcode_comments = 0 gcode_label_objects = 1 gcode_resolution = 0.0125 +gcode_substitutions = infill_acceleration = 1000 infill_anchor = 2.5 infill_anchor_max = 20 diff --git a/print/QUALITY 0.40mm @1.4 nozzle.ini b/print/QUALITY 0.40mm @1.4 nozzle.ini new file mode 100644 index 0000000..79ba026 --- /dev/null +++ b/print/QUALITY 0.40mm @1.4 nozzle.ini @@ -0,0 +1,146 @@ +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-06-24 at 12:25:07 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 22 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1.4 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.5 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 1.5 +fill_angle = 45 +fill_density = 10% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1.5 +first_layer_height = 0.3 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 30 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1.5 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 50 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.4 +max_print_speed = 50 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 1.5 +perimeter_speed = 35 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1.5 +solid_infill_speed = 45 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.7 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 40 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1.4 +top_solid_infill_speed = 35 +top_solid_layers = 4 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/print/TEST 1.20mm @1.4 nozzle.ini b/print/TEST 1.20mm @1.4 nozzle.ini new file mode 100644 index 0000000..aa6a72c --- /dev/null +++ b/print/TEST 1.20mm @1.4 nozzle.ini @@ -0,0 +1,146 @@ +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-07-02 at 16:47:21 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 20 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1.4 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.5 +external_perimeter_speed = 15 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 1.5 +fill_angle = 45 +fill_density = 10% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1.5 +first_layer_height = 0.3 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 20 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1.5 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 22 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 1.2 +max_print_speed = 50 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 1.5 +perimeter_speed = 22 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 15 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1.5 +solid_infill_speed = 22 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.7 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 22 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1.4 +top_solid_infill_speed = 20 +top_solid_layers = 4 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/print/WOOD 0.30mm @1.4 nozzle.ini b/print/WOOD 0.30mm @1.4 nozzle.ini new file mode 100644 index 0000000..f6daa55 --- /dev/null +++ b/print/WOOD 0.30mm @1.4 nozzle.ini @@ -0,0 +1,146 @@ +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-07-06 at 10:01:58 UTC +avoid_crossing_perimeters = 1 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 40 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1.4 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.5 +external_perimeter_speed = 70% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 1.5 +fill_angle = 45 +fill_density = 0% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1.5 +first_layer_height = 0.3 +first_layer_speed = 35 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 40 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1.5 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 50 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.3 +max_print_speed = 100 +max_volumetric_speed = 40 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 1.5 +perimeter_speed = 50 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = close_holes +small_perimeter_speed = 70% +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1.5 +solid_infill_speed = 90% +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.7 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 40 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 1 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1.4 +top_solid_infill_speed = 70% +top_solid_layers = 4 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/printer/Original Prusa i3 MK3S & MK3S+ 1.4 nozzle.ini b/printer/Original Prusa i3 MK3S & MK3S+ 1.4 nozzle.ini new file mode 100644 index 0000000..93f8223 --- /dev/null +++ b/printer/Original Prusa i3 MK3S & MK3S+ 1.4 nozzle.ini @@ -0,0 +1,78 @@ +# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-07-02 at 16:49:07 UTC +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n +between_objects_gcode = +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = "Prusament PLA @0.8 nozzle" +default_print_profile = 0.40mm QUALITY @0.8 nozzle +deretract_speed = 0 +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors +extra_loading_move = -2 +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin +high_current_on_filament_swap = 0 +host_type = octoprint +inherits = Original Prusa i3 MK3S & MK3S+ 0.8 nozzle +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +machine_limits_usage = emit_to_gcode +machine_max_acceleration_e = 5000,5000 +machine_max_acceleration_extruding = 1250,1250 +machine_max_acceleration_retracting = 1250,1250 +machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_x = 1000,960 +machine_max_acceleration_y = 1000,960 +machine_max_acceleration_z = 200,200 +machine_max_feedrate_e = 120,120 +machine_max_feedrate_x = 200,100 +machine_max_feedrate_y = 200,100 +machine_max_feedrate_z = 12,12 +machine_max_jerk_e = 4.5,4.5 +machine_max_jerk_x = 8,8 +machine_max_jerk_y = 8,8 +machine_max_jerk_z = 0.4,0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_layer_height = 0.6 +max_print_height = 210 +min_layer_height = 0.2 +nozzle_diameter = 1.4 +parking_pos_retraction = 92 +pause_print_gcode = M601 +print_host = +printer_model = MK3S +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n +printer_settings_id = +printer_technology = FFF +printer_variant = 0.8 +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 1 +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 1 +retract_length_toolchange = 4 +retract_lift = 2 +retract_lift_above = 0 +retract_lift_below = 209 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +silent_mode = 1 +single_extruder_multi_material = 0 +start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S95 +template_custom_gcode = +thumbnails = 160x120 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0