diff --git a/print/QUALITY 0.40mm @1.0 nozzle.ini b/print/QUALITY 0.40mm @1.0 nozzle.ini new file mode 100644 index 0000000..4a06914 --- /dev/null +++ b/print/QUALITY 0.40mm @1.0 nozzle.ini @@ -0,0 +1,145 @@ +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-06 at 20:10:26 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 22 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.1 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 1.1 +fill_angle = 45 +fill_density = 0% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1.1 +first_layer_height = 0.3 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 30 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1.1 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 50 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.4 +max_print_speed = 50 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 1.1 +perimeter_speed = 35 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1.1 +solid_infill_speed = 45 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.7 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 40 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1 +top_solid_infill_speed = 35 +top_solid_layers = 4 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/print/TEST 0.75mm @1.0 nozzle.ini b/print/TEST 0.75mm @1.0 nozzle.ini new file mode 100644 index 0000000..08836da --- /dev/null +++ b/print/TEST 0.75mm @1.0 nozzle.ini @@ -0,0 +1,145 @@ +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-06 at 20:11:16 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 22 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.1 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 1.1 +fill_angle = 45 +fill_density = 15% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1.1 +first_layer_height = 0.3 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 30 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1.1 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 50 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.4 +max_print_speed = 50 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 1.1 +perimeter_speed = 35 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1.1 +solid_infill_speed = 45 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 1 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.9 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 40 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1 +top_solid_infill_speed = 35 +top_solid_layers = 4 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/printer/Original Prusa i3 MK3S & MK3S+ 1 nozzle.ini b/printer/Original Prusa i3 MK3S & MK3S+ 1 nozzle.ini new file mode 100644 index 0000000..3806a83 --- /dev/null +++ b/printer/Original Prusa i3 MK3S & MK3S+ 1 nozzle.ini @@ -0,0 +1,78 @@ +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-06 at 19:56:41 UTC +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n +between_objects_gcode = +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = "Prusament PLA @0.8 nozzle" +default_print_profile = 0.40mm QUALITY @0.8 nozzle +deretract_speed = 0 +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors +extra_loading_move = -2 +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin +high_current_on_filament_swap = 0 +host_type = octoprint +inherits = Original Prusa i3 MK3S & MK3S+ 0.8 nozzle +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +machine_limits_usage = emit_to_gcode +machine_max_acceleration_e = 5000,5000 +machine_max_acceleration_extruding = 1250,1250 +machine_max_acceleration_retracting = 1250,1250 +machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_x = 1000,960 +machine_max_acceleration_y = 1000,960 +machine_max_acceleration_z = 200,200 +machine_max_feedrate_e = 120,120 +machine_max_feedrate_x = 200,100 +machine_max_feedrate_y = 200,100 +machine_max_feedrate_z = 12,12 +machine_max_jerk_e = 4.5,4.5 +machine_max_jerk_x = 8,8 +machine_max_jerk_y = 8,8 +machine_max_jerk_z = 0.4,0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_layer_height = 0.6 +max_print_height = 210 +min_layer_height = 0.2 +nozzle_diameter = 1 +parking_pos_retraction = 92 +pause_print_gcode = M601 +print_host = +printer_model = MK3S +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n +printer_settings_id = +printer_technology = FFF +printer_variant = 0.8 +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 1 +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 1 +retract_length_toolchange = 4 +retract_lift = 0.4 +retract_lift_above = 0 +retract_lift_below = 209 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +silent_mode = 1 +single_extruder_multi_material = 0 +start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S95 +template_custom_gcode = +thumbnails = 160x120 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0