From affe80d370ee4f6ef5b55397dee3bd22cace5ac4 Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Fri, 6 May 2022 22:13:44 +0200 Subject: [PATCH] =?UTF-8?q?pi=C4=85,=206=20maj=202022,=2022:13:44=20CEST?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- print/QUALITY 0.40mm @1.0 nozzle.ini | 145 ++++++++++++++++++ print/TEST 0.75mm @1.0 nozzle.ini | 145 ++++++++++++++++++ ...riginal Prusa i3 MK3S & MK3S+ 1 nozzle.ini | 78 ++++++++++ 3 files changed, 368 insertions(+) create mode 100644 print/QUALITY 0.40mm @1.0 nozzle.ini create mode 100644 print/TEST 0.75mm @1.0 nozzle.ini create mode 100644 printer/Original Prusa i3 MK3S & MK3S+ 1 nozzle.ini diff --git a/print/QUALITY 0.40mm @1.0 nozzle.ini b/print/QUALITY 0.40mm @1.0 nozzle.ini new file mode 100644 index 0000000..4a06914 --- /dev/null +++ b/print/QUALITY 0.40mm @1.0 nozzle.ini @@ -0,0 +1,145 @@ +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-06 at 20:10:26 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 22 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.1 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 1.1 +fill_angle = 45 +fill_density = 0% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1.1 +first_layer_height = 0.3 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 30 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1.1 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 50 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.4 +max_print_speed = 50 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 1.1 +perimeter_speed = 35 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1.1 +solid_infill_speed = 45 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.7 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 40 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1 +top_solid_infill_speed = 35 +top_solid_layers = 4 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/print/TEST 0.75mm @1.0 nozzle.ini b/print/TEST 0.75mm @1.0 nozzle.ini new file mode 100644 index 0000000..08836da --- /dev/null +++ b/print/TEST 0.75mm @1.0 nozzle.ini @@ -0,0 +1,145 @@ +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-06 at 20:11:16 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0.8 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.9 +bridge_speed = 22 +brim_separation = 0.1 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==1 and num_extruders==1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 0 +draft_shield = disabled +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.1 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 1.1 +fill_angle = 45 +fill_density = 15% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 1.1 +first_layer_height = 0.3 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 30 +gcode_comments = 0 +gcode_label_objects = 1 +gcode_resolution = 0.0125 +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 20 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 1.1 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 50 +inherits = 0.40mm QUALITY @0.8 nozzle +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.4 +max_print_speed = 50 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 1.1 +perimeter_speed = 35 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.2 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 1.1 +solid_infill_speed = 45 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = 0 +support_material_buildplate_only = 1 +support_material_closing_radius = 2 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.9 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 40 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thick_bridges = 1 +thin_walls = 0 +threads = 24 +top_fill_pattern = monotonic +top_infill_extrusion_width = 1 +top_solid_infill_speed = 35 +top_solid_layers = 4 +top_solid_min_thickness = 1.2 +travel_speed = 180 +travel_speed_z = 12 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/printer/Original Prusa i3 MK3S & MK3S+ 1 nozzle.ini b/printer/Original Prusa i3 MK3S & MK3S+ 1 nozzle.ini new file mode 100644 index 0000000..3806a83 --- /dev/null +++ b/printer/Original Prusa i3 MK3S & MK3S+ 1 nozzle.ini @@ -0,0 +1,78 @@ +# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-05-06 at 19:56:41 UTC +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n +between_objects_gcode = +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = "Prusament PLA @0.8 nozzle" +default_print_profile = 0.40mm QUALITY @0.8 nozzle +deretract_speed = 0 +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors +extra_loading_move = -2 +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin +high_current_on_filament_swap = 0 +host_type = octoprint +inherits = Original Prusa i3 MK3S & MK3S+ 0.8 nozzle +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +machine_limits_usage = emit_to_gcode +machine_max_acceleration_e = 5000,5000 +machine_max_acceleration_extruding = 1250,1250 +machine_max_acceleration_retracting = 1250,1250 +machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_x = 1000,960 +machine_max_acceleration_y = 1000,960 +machine_max_acceleration_z = 200,200 +machine_max_feedrate_e = 120,120 +machine_max_feedrate_x = 200,100 +machine_max_feedrate_y = 200,100 +machine_max_feedrate_z = 12,12 +machine_max_jerk_e = 4.5,4.5 +machine_max_jerk_x = 8,8 +machine_max_jerk_y = 8,8 +machine_max_jerk_z = 0.4,0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_layer_height = 0.6 +max_print_height = 210 +min_layer_height = 0.2 +nozzle_diameter = 1 +parking_pos_retraction = 92 +pause_print_gcode = M601 +print_host = +printer_model = MK3S +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n +printer_settings_id = +printer_technology = FFF +printer_variant = 0.8 +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 1 +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 1 +retract_length_toolchange = 4 +retract_lift = 0.4 +retract_lift_above = 0 +retract_lift_below = 209 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +silent_mode = 1 +single_extruder_multi_material = 0 +start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S95 +template_custom_gcode = +thumbnails = 160x120 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0