sob, 19 lut 2022, 02:16:06 CET

print/SPEED - 0.30mm.ini

@@ -1,13 +1,15 @@
-# generated by PrusaSlicer 2.3.0+linux-x64-GTK3 on 2021-03-22 at 23:09:49 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-18 at 20:43:54 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = rectilinear
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
 bottom_solid_min_thickness = 0
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
 bridge_speed = 50
+brim_separation = 0
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,32 +17,39 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 60
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 50
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 25
 extruder_clearance_radius = 45
-extrusion_width = 0.45
+extrusion_width = 0.6
 fill_angle = 45
-fill_density = 5%
+fill_density = 10%
 fill_pattern = rectilinear
 first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.4
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.6
 first_layer_height = 0.2
-first_layer_speed = 60
+first_layer_speed = 45
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 60
 gcode_comments = 1
 gcode_label_objects = 1
+gcode_resolution = 0.0125
 infill_acceleration = 1250
 infill_anchor = 600%
 infill_anchor_max = 50
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.4
+infill_extrusion_width = 0.6
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
@@ -55,7 +64,8 @@ ironing_type = top
 layer_height = 0.3
 max_print_speed = 200
 max_volumetric_speed = 0
-min_skirt_length = 4
+min_skirt_length = 0
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -63,19 +73,24 @@ output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0
 overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
+perimeter_extrusion_width = 0.6
 perimeter_speed = 60
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 50
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,7 +102,10 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
 support_material_buildplate_only = 0
+support_material_closing_radius = 2
 support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
@@ -95,25 +113,30 @@ support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
 support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
+thick_bridges = 1
 thin_walls = 0
-threads = 24
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 80
+threads = 4
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 45
 top_solid_layers = 3
 top_solid_min_thickness = 0
 travel_speed = 180
+travel_speed_z = 0
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60