diff --git a/filament/DevidDesign PLA @MMU2.ini b/filament/DevidDesign PLA @MMU2.ini
index 1971793..dc0ae64 100644
--- a/filament/DevidDesign PLA @MMU2.ini	
+++ b/filament/DevidDesign PLA @MMU2.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-08 at 21:14:31 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-10 at 18:29:50 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -12,9 +12,9 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
 filament_colour = #FF8000
-filament_cooling_final_speed = 2
-filament_cooling_initial_speed = 3
-filament_cooling_moves = 2
+filament_cooling_final_speed = 10
+filament_cooling_initial_speed = 20
+filament_cooling_moves = 3
 filament_cost = 27.82
 filament_density = 1.24
 filament_deretract_speed = nil
@@ -41,8 +41,8 @@ filament_spool_weight = 230
 filament_toolchange_delay = 0
 filament_type = PLA
 filament_unload_time = 12
-filament_unloading_speed = 20
-filament_unloading_speed_start = 100
+filament_unloading_speed = 90
+filament_unloading_speed_start = 140
 filament_vendor = Made for Prusa
 filament_wipe = nil
 first_layer_bed_temperature = 60
diff --git a/printer/Original Prusa i3 MK3S & MK3S+ MMU2S_.ini b/printer/Original Prusa i3 MK3S & MK3S+ MMU2S_.ini
index 2cc3af7..5fc7253 100644
--- a/printer/Original Prusa i3 MK3S & MK3S+ MMU2S_.ini	
+++ b/printer/Original Prusa i3 MK3S & MK3S+ MMU2S_.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-09 at 00:16:14 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-10 at 18:29:56 UTC
 bed_custom_model = 
 bed_custom_texture = 
 bed_shape = 0x0,250x0,250x210,0x210
@@ -11,7 +11,7 @@ default_filament_profile = "Prusament PLA @MMU2"
 default_print_profile = 0.15mm QUALITY @MK3
 deretract_speed = 0,0,0,0,0
 end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n
-extra_loading_move = -25
+extra_loading_move = 0
 extruder_colour = #FFA500;#FFFF00;#3EC0FF;#FF4F4F;#000000
 extruder_offset = 0x0,0x0,0x0,0x0,0x0
 gcode_flavor = marlin