nie, 6 mar 2022, 16:28:37 CET

print/STRONG - 0.20mm.ini

@@ -1,12 +1,15 @@
-# generated by PrusaSlicer 2.3.0-beta1+linux-x64 on 2020-12-02 at 23:28:08 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-06 at 14:40:29 UTC
 avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
 bottom_solid_min_thickness = 0
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
+brim_separation = 0
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.45
@@ -26,17 +29,24 @@ extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 25%
-fill_pattern = cubic
-first_layer_acceleration = 1000
+fill_pattern = gyroid
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
-infill_anchor = 600%
-infill_anchor_max = 50
+gcode_resolution = 0.0125
+infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -55,6 +65,7 @@ layer_height = 0.2
 max_print_speed = 200
 max_volumetric_speed = 0
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -67,6 +78,10 @@ perimeter_speed = 45
 perimeters = 5
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.2
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -75,6 +90,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -86,23 +102,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
-support_material_xy_spacing = 50%
+support_material_xy_spacing = 60%
+thick_bridges = 1
 thin_walls = 1
 threads = 24
 top_fill_pattern = monotonic
@@ -111,8 +133,10 @@ top_solid_infill_speed = 40
 top_solid_layers = 5
 top_solid_min_thickness = 0
 travel_speed = 180
+travel_speed_z = 12
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60