From c86b0abeca8e50d00841bec3d335063d6a125416 Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Sun, 2 Oct 2022 20:55:46 +0200 Subject: [PATCH] 2022.10.02 20:55 --- printer/Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle_.ini | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/printer/Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle_.ini b/printer/Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle_.ini index 56ea9a7..52cc7c4 100644 --- a/printer/Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle_.ini +++ b/printer/Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle_.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-09-02 at 18:31:49 UTC +# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2022-10-02 at 18:38:40 UTC bed_custom_model = bed_custom_texture = bed_shape = 0x0,250x0,250x210,0x210 @@ -12,7 +12,7 @@ default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 deretract_speed = 25,25,25,25,25 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n extra_loading_move = -25 -extruder_colour = #FFFFFF;#000000;#FF0000;#FFFF00;#FFC0CB +extruder_colour = #BFBFBF;#FF8888;#B5EDFF;#FF4F4F;#FBEB7D extruder_offset = 0x0,0x0,0x0,0x0,0x0 gcode_flavor = marlin high_current_on_filament_swap = 0 @@ -69,6 +69,7 @@ single_extruder_multi_material = 1 start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 template_custom_gcode = thumbnails = 160x120 +thumbnails_format = PNG toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1