From de47343ddf6cf06f324f427034b89065675fd40a Mon Sep 17 00:00:00 2001
From: Przemek Grondek <przemek@grondek.pl>
Date: Sat, 12 Mar 2022 00:25:48 +0100
Subject: [PATCH] sob, 12 mar 2022, 00:25:48 CET

---
 print/STRONG - 0.20mm.ini | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/print/STRONG - 0.20mm.ini b/print/STRONG - 0.20mm.ini
index d10d7d7..8545fb3 100644
--- a/print/STRONG - 0.20mm.ini	
+++ b/print/STRONG - 0.20mm.ini	
@@ -1,14 +1,14 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-06 at 14:40:29 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-11 at 23:24:43 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
-bottom_solid_min_thickness = 0
+bottom_solid_min_thickness = 0.7
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
 bridge_speed = 25
-brim_separation = 0
+brim_separation = 0.1
 brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
@@ -16,15 +16,15 @@ compatible_printers =
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
-dont_support_bridges = 1
+dont_support_bridges = 0
 draft_shield = disabled
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 25
 external_perimeters_first = 0
 extra_perimeters = 1
-extruder_clearance_height = 25
+extruder_clearance_height = 20
 extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
@@ -49,7 +49,7 @@ infill_anchor = 2.5
 infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.45
+infill_extrusion_width = 0.8
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
@@ -70,7 +70,7 @@ notes =
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhangs = 0
+overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
@@ -131,7 +131,7 @@ top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 40
 top_solid_layers = 5
-top_solid_min_thickness = 0
+top_solid_min_thickness = 0.7
 travel_speed = 180
 travel_speed_z = 12
 wipe_tower = 1