diff --git a/filament/3DActive.ini b/filament/3DActive.ini
index c27d6f8..edcbd4b 100644
--- a/filament/3DActive.ini
+++ b/filament/3DActive.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-27 at 22:16:15 UTC
+# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-28 at 13:14:25 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -48,7 +48,7 @@ filament_wipe = nil
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 full_fan_speed_layer = 4
-inherits = Generic PLA
+inherits = 
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 15
diff --git a/filament/Devil Design ABS+ ABS-T.ini b/filament/Devil Design ABS+ ABS-T.ini
index 2725f83..359f5dc 100644
--- a/filament/Devil Design ABS+ ABS-T.ini	
+++ b/filament/Devil Design ABS+ ABS-T.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-05-17 at 20:29:47 UTC
+# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-28 at 13:14:29 UTC
 bed_temperature = 110
 bridge_fan_speed = 25
 compatible_printers = 
@@ -37,6 +37,7 @@ filament_retract_restart_extra = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
+filament_spool_weight = 0
 filament_toolchange_delay = 0
 filament_type = ABS
 filament_unload_time = 0
@@ -46,7 +47,8 @@ filament_vendor = Made for Prusa
 filament_wipe = nil
 first_layer_bed_temperature = 100
 first_layer_temperature = 255
-inherits = Prusa ABS
+full_fan_speed_layer = 0
+inherits = 
 max_fan_speed = 15
 min_fan_speed = 15
 min_print_speed = 15
diff --git a/filament/DevilDesign PET-G.ini b/filament/DevilDesign PET-G.ini
index 2cb86b6..a1d2b96 100644
--- a/filament/DevilDesign PET-G.ini	
+++ b/filament/DevilDesign PET-G.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-27 at 22:15:42 UTC
+# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-28 at 13:14:04 UTC
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -48,7 +48,7 @@ filament_wipe = nil
 first_layer_bed_temperature = 85
 first_layer_temperature = 230
 full_fan_speed_layer = 5
-inherits = Generic PET
+inherits = 
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15
diff --git a/filament/Vertex PLA.ini b/filament/Vertex PLA.ini
index 1ffc3f2..e618842 100644
--- a/filament/Vertex PLA.ini	
+++ b/filament/Vertex PLA.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-27 at 22:12:32 UTC
+# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-28 at 13:14:34 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -48,7 +48,7 @@ filament_wipe = nil
 first_layer_bed_temperature = 60
 first_layer_temperature = 205
 full_fan_speed_layer = 0
-inherits = Generic PLA
+inherits = 
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 15