From e4d93397bc49a4acb06ab50ff3c6271009f1bb85 Mon Sep 17 00:00:00 2001 From: Przemek Grondek <przemek@grondek.pl> Date: Sat, 28 Aug 2021 15:15:07 +0200 Subject: [PATCH] sob, 28 sie 2021, 15:15:07 CEST --- filament/3DActive.ini | 4 ++-- filament/Devil Design ABS+ ABS-T.ini | 6 ++++-- filament/DevilDesign PET-G.ini | 4 ++-- filament/Vertex PLA.ini | 4 ++-- 4 files changed, 10 insertions(+), 8 deletions(-) diff --git a/filament/3DActive.ini b/filament/3DActive.ini index c27d6f8..edcbd4b 100644 --- a/filament/3DActive.ini +++ b/filament/3DActive.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-27 at 22:16:15 UTC +# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-28 at 13:14:25 UTC bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -48,7 +48,7 @@ filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 215 full_fan_speed_layer = 4 -inherits = Generic PLA +inherits = max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 15 diff --git a/filament/Devil Design ABS+ ABS-T.ini b/filament/Devil Design ABS+ ABS-T.ini index 2725f83..359f5dc 100644 --- a/filament/Devil Design ABS+ ABS-T.ini +++ b/filament/Devil Design ABS+ ABS-T.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-05-17 at 20:29:47 UTC +# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-28 at 13:14:29 UTC bed_temperature = 110 bridge_fan_speed = 25 compatible_printers = @@ -37,6 +37,7 @@ filament_retract_restart_extra = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 +filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = ABS filament_unload_time = 0 @@ -46,7 +47,8 @@ filament_vendor = Made for Prusa filament_wipe = nil first_layer_bed_temperature = 100 first_layer_temperature = 255 -inherits = Prusa ABS +full_fan_speed_layer = 0 +inherits = max_fan_speed = 15 min_fan_speed = 15 min_print_speed = 15 diff --git a/filament/DevilDesign PET-G.ini b/filament/DevilDesign PET-G.ini index 2cb86b6..a1d2b96 100644 --- a/filament/DevilDesign PET-G.ini +++ b/filament/DevilDesign PET-G.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-27 at 22:15:42 UTC +# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-28 at 13:14:04 UTC bed_temperature = 90 bridge_fan_speed = 50 compatible_printers = @@ -48,7 +48,7 @@ filament_wipe = nil first_layer_bed_temperature = 85 first_layer_temperature = 230 full_fan_speed_layer = 5 -inherits = Generic PET +inherits = max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 15 diff --git a/filament/Vertex PLA.ini b/filament/Vertex PLA.ini index 1ffc3f2..e618842 100644 --- a/filament/Vertex PLA.ini +++ b/filament/Vertex PLA.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-27 at 22:12:32 UTC +# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-08-28 at 13:14:34 UTC bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -48,7 +48,7 @@ filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 205 full_fan_speed_layer = 0 -inherits = Generic PLA +inherits = max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 15