From e4fa196d6d9a7a9622481997f5003bda80b9cac5 Mon Sep 17 00:00:00 2001 From: Przemek Grondek Date: Fri, 6 Jan 2023 04:10:30 +0100 Subject: [PATCH] 2023.01.06 04:10 --- print/QUALITY - 0.20mm.ini | 2 +- printer/Original Prusa i3 MK3S & MK3S+ MMU2S_.ini | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/print/QUALITY - 0.20mm.ini b/print/QUALITY - 0.20mm.ini index 2f68084..c8b0a94 100644 --- a/print/QUALITY - 0.20mm.ini +++ b/print/QUALITY - 0.20mm.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2022-12-13 at 19:30:04 UTC +# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2023-01-06 at 00:14:19 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic diff --git a/printer/Original Prusa i3 MK3S & MK3S+ MMU2S_.ini b/printer/Original Prusa i3 MK3S & MK3S+ MMU2S_.ini index 4215f7c..a7209c3 100644 --- a/printer/Original Prusa i3 MK3S & MK3S+ MMU2S_.ini +++ b/printer/Original Prusa i3 MK3S & MK3S+ MMU2S_.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2022-12-09 at 14:43:48 UTC +# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2023-01-06 at 02:37:29 UTC bed_custom_model = bed_custom_texture = bed_shape = 0x0,250x0,250x210,0x210 @@ -12,7 +12,7 @@ default_print_profile = 0.15mm QUALITY @MK3 deretract_speed = 0,0,0,0,0 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n extra_loading_move = -25 -extruder_colour = #BFBFBF;#80E0FF;#FFFF00;#FF0000;#EEE2D7 +extruder_colour = #000000;#FFFFFF;#FFFF00;#FF0000;#EEE2D7 extruder_offset = 0x0,0x0,0x0,0x0,0x0 gcode_flavor = marlin high_current_on_filament_swap = 0