nie, 9 sty 2022, 01:16:46 CET

filament/DevidDesign PLA @MMU2.ini

@@ -0,0 +1,57 @@
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-08 at 21:14:31 UTC
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF8000
+filament_cooling_final_speed = 2
+filament_cooling_initial_speed = 3
+filament_cooling_moves = 2
+filament_cost = 27.82
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 15
+filament_loading_speed = 14
+filament_loading_speed_start = 19
+filament_max_volumetric_speed = 13
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 230
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 12
+filament_unloading_speed = 20
+filament_unloading_speed_start = 100
+filament_vendor = Made for Prusa
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+full_fan_speed_layer = 4
+inherits = Prusa PLA @MMU2
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
+temperature = 205

printer/Original Prusa i3 MK3S & MK3S+ MMU2S_.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-04 at 18:02:16 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-01-09 at 00:16:14 UTC
 bed_custom_model = 
 bed_custom_texture = 
 bed_shape = 0x0,250x0,250x210,0x210
@@ -12,7 +12,7 @@ default_print_profile = 0.15mm QUALITY @MK3
 deretract_speed = 0,0,0,0,0
 end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n
 extra_loading_move = -25
-extruder_colour = #FFFF00;#0000FF;#3EC0FF;#FF4F4F;#000000
+extruder_colour = #FFA500;#FFFF00;#3EC0FF;#FF4F4F;#000000
 extruder_offset = 0x0,0x0,0x0,0x0,0x0
 gcode_flavor = marlin
 high_current_on_filament_swap = 0